• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.29-29
• /
• 1997

ZSM-5계 제올라이트는 직경이 약 6${\AA}$인 균일한 3차원 채널 형태의 기공을 형성하므로 이를 이용한 기체 분리막은 분자체가름(molecular sieving)이나 미세기공확산(micropore diffusion) 및 표면확산(surface diffusion) 메커니즘에 의해 최근 지구 온난화의 주범으로 지목되고 있는 CO$_2$ 기체에 대해 높은 분리 효율을 기대할 수 있으므로 ZSM-5 복합분리막의 제조 및 기체 투과 특성과 CO$_2$ 분리 특성에 대해 연구하였으며 다음과 같은 결과를 얻을 수 있었다. 콜로이달 실리카 졸에 질산 알루미늄, 수산화 나트륨 및 TPABr을 첨가한 혼합졸과 물유리를 증류수로 희석한 후 TPBr을 첨가한 용액을 각각 150~180${\AA}$의 온도 범위의 오토클레이브에서 수열 처리하여 ZSM-5와 실리카라이트를 합성하였다. 합성 제올라이트의 결정 구조는 사방정이었으나 450${\AA}$에서 하소하였을 때에는 단사정으로 전이됨과 동시에 채널 속을 채우고 있던 TPABr이 제거되면서 제올라이트의 3차원 채널 형태의 기공 구조가 생성되었다. 제올라이트 결정의 형상과 크기는 실리카 공급원과 반응용액/졸의 농도에 따라 매우 민감하게 변화되었다. 하소 제올라이트의 비표면적은 약 360 m$^2$/g 이었다. 합성 제올라이트의 표면은 소수성인 반면에 높은 CO$_2$ 흡착능을 갖고 있어서 CO$_2$ 분리용 막의 재료로써 적합하였다.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.857-864
• /
• 2005

Dealuminated and alkali/alkaline-earth metal exchanged Y-type and ZSM-5 zeolites were prepared as catalytic materials. Comparing with the composition of starting material, the magnitude of Si/Al ratio was increased after dealumination and cation exchange process. The ratio of Si/Al on surface was appeared to be larger than that in bulk. The destruction of basic frame in catalysts observed was understood to be due to a detachment of aluminum, which results in reducing framework while increasing non-framework. This phenomenon becomes more serious with increasing time of steam treatment and even more significant for the cation exchanged catalysts. The desorption peaks of the NO-TPD profiles taken after dealumination and cation exchanged Y-type and ZSM-5 zeolites shifted to the low temperature region. It was also found that the longer the steam treatment time, the degree of shift toward low temperature region was increased. The catalytic activities are dependent on the nature of cation exchanged, the ratio of Si/Al and the ratio of framework/non-framework by a change in basic frame.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.58-58
• /
• 1996

ZSM-5계 제올라이트의 특성을 이용한 기체분리용 제올라이트-세라믹 복합 분리막을 개발하기 위하여 최적 ZSM-5계 제올라이트의 합성 조건, 복합막 제조 및 합성 복합막의 기체 투과/분리 특성에 대하여 연구하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.331-334
• /
• 1999

본 논문에서는 경남산 고령토를 이용하여 고 실리카 제올라이트인 ZSM-5를 조제하는 방법에 대하여 검토한다. KOH를 알칼리 종으로 하여 ZSM-5를 합성하였다. 또한 수열합성을 위한 장치를 제작하여 회전속도 및 반응온도를 제어하였다. Si$_2$/Al$_2$O$_3$의 몰비와 $K_2$O/SiO$_2$의 몰비에 따른 결정생성물의 영역을 밝혔다. 또한, 생성된 ZSM-5를 SEM 및 X선 회절장치로 확인하였다. 또한, 반응시간에 따른 고체회수율 및 ZSM-5의 펴크강도를 관찰하였다. 또한, ZSM-5의 생성을 위한 반응시간을 알았고, ZSM-5가 소멸되기 시작하는 시간을 알았다. 또한 ZSM-5는 SiO$_2$/A1$_2$O$_3$의 몰비의 증가 및 반응시간의 증가에 의해 $\alpha$-Quartz로 전환되어짐을 알았다.

• Membrane Journal
• /
• v.16 no.2
• /
• pp.159-166
• /
• 2006

MFI(Mobil Five) structured hydrophobic ZSM-5 zeolite membrane was used for selective pervaporation of trichlorinated organic compounds(trichloromethane, trichloroethane, trichloroethylene) from their aqueous solutions. ZSM-5 zeolite membrane was hydrothermally synthesized on the inside of a porous stainless steel tube by secondary growth employing ZSM-5 seed powders. Separation factors for each binary mixtures were observed $16{\sim}66$ for trichloromethane/water, $3.3{\sim}4.6$ for trichloroethane/water and $1.4{\sim}8$ for trichloroethylene/water at the experimental conditions of the feed mole fraction from 0.0001 to 0.001 with temperature ranged $25{\sim}35^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.149-155
• /
• 1988

Pentasil zeolites, including ZSM-5, ZSM-8, ZSM-11 and silicalites, were synthesized using various organic cations. Synthesis run was carried out in a Parr pressure reactor of $2{\ell}$ capacity and a self-constructed reactor with a magnetic stirring system. The reactant materials used are colloidal silica (Snowtex), sodium aluminate, sodium chloride, TEA, TPA, TBA, Choline and water. The composition of starting materials and the reaction temperature were found to be important factors for the synthesis of uniform pentasil zeolites.

• Clean Technology
• /
• v.19 no.3
• /
• pp.287-294
• /
• 2013

The $NH_3$-selective catalytic reduction (SCR) reaction of NO with excess of oxygen were systematically investigated over Cu-zeolite and Fe-zeolite catalysts. Cu-zeolite and Fe-zeolite catatysts to adapt the SCR technology for mobile diesel engines were prepared by liquid ion exchange and incipient wetness impregnation of $NH_4$-BEA and $NH_4$-ZSM-5 zeolites. The catalysts were characterized by BET, XRD, FE-TEM (field emission transmission electron microscopy) and SEM/EDS. The SCR examinations performed under stationary conditions showed that the Cu-exchanged BEA catalyst revealed pronounced performance at low temperatures of $200{\sim}250^{\circ}C$. With respect to the Fe-zeolite catalyst, the Cu-zeolite catalyst showed a higher activity in the SCR reaction at low temperatures below $250^{\circ}C$. BEA zeolite based catalyst exhibited good activity in comparison with ZSM-5 zeolite based catalyst at low temperatures below $250^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.34 no.7
• /
• pp.747-757
• /
• 1997

ZSM-5 zeolite composite membranes have been synthesized from a silica sol solution containing TPABr as an organic template by the dip-coating and the pressurized-coating hydrothermal treatment techniques. The CO2 separation efficiency of synthesized composite membranes was also investigated. The permeation mechanism of CO2 through ZSM-5 membranses was the surface diffusion, and that of N2, O2, and He gases was Knudsen diffusion or activated diffusion depending on the synthetic method of membranes and the measurement temperature. The CO2/N2 separation factor of the membrane prepared by the dip-coating hydrothermal treatment was 2.5 at about 12$0^{\circ}C$, while the ZSM-5 composite membrane synthesized by the pressurized-coating hydrothermal treatment technique showed the CO2/N2 separation factor of 9.0 at room temperature higher than that ever reported in the literature.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.32-44
• /
• 2002

Selective catalytic reduction of nitric oxide by methane in the presence of excess oxygen was investigated over copper and cobalt ion-exchanged ZSM-5 zeolites. Copper ion-exchanged ZSM-5(Cu-ZSM-5) has the limitations for commercial applications to lean-bum gasoline and diesel engines due to low thermal stability and resistance to water vapor and sulfur dioxide. But cobalt ion-exchanged ESM-5(Co-ZSM-5) is more active at high temperatures and also stable to water vapor and sulfur dioxide for catalytic reduction of nitric oxide by methane. The catalytic activity of Cu-ZSM-5 for NO reduction increases with increasing temperatures, reaches the maximum conversion of 23.0% at 350\"C. and then decreases with higher temperatures. In the meantime catalytic activities of Co-ZSM-5 show the maximum conversion of 25.8% at $500^{\circ}C$ Therefore Co-ZSM-5 catalysts have higher thermal stability at high temperatures. Catalytic activities of both zeolites were remarkably enhanced with the existence of oxygen in the exhaust. It is noted that the catalytic activity of Cu-ZSM-5 decreases with the increasing concentration of methane while the catalytic activity of Co-ZSM-5 decreases with increasing contents of methane in the exhaust. This may imply the existence of different paths of NO reduction by methane in the presence of excess oxygen fur Cu-ZSM-5 and Co-ZSM-5 catalysts. For binary metal ionexchanged ZSM-5, the primary ion-exchanged metal may be masked by secondary ion-exchanged component, which plays the important role for catalytic activities of binary metal ion-exchanged ZSM-5, Therefore CuCo-ZSM-5 catalysts show the similar volcano-shaped curves to Cu-ZSM-5 catalysts between the activity and temperature. It Is interesting that the activities of CoCu-ZSM-5 catalysts indicate almost no dependence on the concentration of methane in the exhaust.aust.

• Journal of the Korean Ceramic Society
• /
• v.33 no.9
• /
• pp.1064-1072
• /
• 1996

The synthetic conditions and characteristics of ZSM-5 type zeolites (ZSM-5/silicalite) for the preparation of the zeolite composite membranes for gas separation were investigated. ZSM-5 zeolites could be synthesized by the hydrothermal treatment of the mixture of colloidal silica sol aluminum nitrate sodium hydroxide and TPABr at a temperature range of 150-17$0^{\circ}C$ in the autoclave. Silicalties were done from the solution of water glass water and TPABr. Their crystalline structures transformed from orthorhombic to monoclinic from and their pore structures of three-dimensional channels were opened as TPABr filling channels was burned off at the calcination temperature of 50$0^{\circ}C$. The specific surface area of the calcined zeolite was about 360 m3/g and its surface property was hydrophobic. Crystal sizes of ZSM-5 and silicalite were 0.5-1.0${\mu}{\textrm}{m}$ and 8-10${\mu}{\textrm}{m}$ respectively having no change due to the calcination. In particular the shape and the size of the ZSM-5 type zeolite were sensitively varied with silica sources and concentrations of reaction solutions/sols.