• Journal of the Korea Institute of Building Construction
• /
• v.23 no.2
• /
• pp.153-164
• /
• 2023

The objective of this study is to examine the removal rate of air pollutants, specifically sulfur oxides (SO_x) and nitrogen oxides(NO_x), using concrete permeable blocks containing zeolite beads coated with materials capable of eliminating these pollutants. Titanium dioxide(TiO₂) powder and coconut shell powder were utilized for the removal of SO_x and NO_x and were applied as coatings on the zeolite beads. Concrete permeable block specimens embedded with the coated zeolite beads were produced using an actual factory production line. Test results demonstrated that the concrete permeable block containing zeolite beads coated with coconut shell powder in the surface layer achieved SO_x and NO_x removal rates of 12.5% and 99%, respectively, exhibiting superior performance compared to other blocks. Additionally, the flexural strength and slip resistance were 5.3MPa and 65BPN or higher, respectively, satisfying the requirements specified in KS F 4419 and KS F 4561. Conversely, the permeability coefficient exhibited low permeability, with grades 2 and 3 before and after contaminant pollution, according to the standard for 'design, construction, and maintenance of pavement using permeable block'. In conclusion, incorporating zeolite beads coated with coconut shell powder in the surface layer enables simultaneous removal of SO_x and NO_x, irrespective of ultraviolet rays, while maintaining adequate flexural strength and slip resistance. However, the permeability is significantly reduced, necessitating further improvements.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.3
• /
• pp.145-151
• /
• 2015

In order to remove Sr ions and Cs ions from aqueous solution, PS-zeolite beads were prepared by immobilizing zeolite with polysulfone (PS). The prepared PS-zeolite beads were characterized by SEM, XRD, FT-IR, and TGA. The optimum condition to prepare PS-zeolite beads was 1.25 g of PS content and 2 g of zeolite A. The removal efficiencies of Sr and Cs ions by the PS-zeolite beads increased as the solution pH increases and nearly reached a plateau at pH 4. The PS-zeolite beads prepared in this study showed a remarkably high selectivity for Sr ion and Cs ion under the coexistence of ions such as $Na^+$, $K^+$, $Mg^{2+}$, and $Ca^{2+}$. Zeolite particles detached from the PS-zeolite beads were not observed on this experiments, and also the PS-zeolite beads maintained the morphological structure on a SEM image. The removal efficiencies of Sr ions and Cs ions by PS-zeolite beads were maintained over 90% even after five adsorption-desorption cycles. These results implied that the prepared PS-zeolite beads could be an available adsorbent for the adsorption of Sr and Cs ions. These results suggest that the PS-zeolite can potentially be used as an adsorbent in radioactive ions removal for the treatment of industrial wastewater.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.8
• /
• pp.450-457
• /
• 2015

In this research a adsorbent, PVA-Zeolite bead, was prepared by immobilizing zeolite with PVA. The results of XRD and SEM analysis showed that the prepared PVA-Zeolite beads had porous structure and the zeolite particles were in mobilized within the internal matrix of the beads. The adsorption properties of Sr ion and Cs ion with the adsorbent were studied by different parameters such as effect of pH, adsorption rate, and adsorption isotherm. The adsorption of Sr ion and Cs ion reached equilibrium after 540 minutes. The adsorption kinetics of both ions by the PVA-Zeolite beads were fitted well by the pseudo-second-order model more than pseudo-first-order model. The equilibrium data fitted well with Langmuir isotherm model. The maximum adsorption capacities of Sr ion and Cs ion calculated from Langmuir isotherm model were 52.08 mg/g and 58.14 mg/g, respectively. The external mass transfer step was very fast compared to the intra-particle diffusion step in the adsorption process of Cs ion and Sr ion by the PVA-Zeolite beads. This result implied that the rate controlling step was the intra-particle diffusion step.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2019.10a
• /
• pp.151-151
• /
• 2019

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2016.10a
• /
• pp.263-263
• /
• 2016

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.14-14
• /
• 2011

폴리우레탄 필름을 이용하여 등산복, 스포츠 웨어, 보호복 등 많은 의복이 제조되고 있으며, 현재 폴리우레탄 필름에 항균성을 부여하여 메디컬 소재에 적용되고 있다. 항균성을 부여하는 물질은 제올라이트. 수산화아파타이트, 실리카 겔을 이용한 많은 무기 항균제가 사용되고 있다. 이들중 특히 수산화아파타이트는 생체친화력 및 이온교환 능력이 우수하여 인공뼈 또는 인공치아로 사용되고, 환경분야에서는 이온교환수지로 중금속 제거를 위하여 사용되기도 한다. 본 연구에서는 폴리우레탄 필름 내부의 비드 간극 및 크기를 제어하여 비드콘 구조를 가지는 폴리우레탄 필름을 제조하였고 수산화아파타이트에 다양한 조건으로 은이온을 흡착시켜 은의 최적 흡착 조건을 설정하고 은이 흡착된 수산화아파타이트의 입자를 제어하여 다양한 종류의 입자를 제조하고 입자별 항균성을 평가하였다. 최종적으로 개발된 비드콘 폴리우레탄 필름과 은담지 수산화아파타이트를 여러가지 조건으로 복합화하여 항균성을 가지는 아파타이트복합 폴리우레탄필름을 제조하고 개발된 필름의 항균성 및 그 특성을 분석하여 보았다.

• Journal of Environmental Science International
• /
• v.24 no.11
• /
• pp.1331-1341
• /
• 2015

The removal of Sr ion and Cs ion was investigated to evaluate adsorption properties by using SAN-Zeolite beads immobilized with styrene acrylonitrile (SAN). The adsorption capacities increased with the decrease of SAN/zeolite ratio (SAR) from 2.5 to 0.83. The relationship of adsorption capacity ($q_e$) and SAR was described by experimental equation such as $q_e=20.88+137.81e^{-1.96SAR}$ ($r^2=0.9980$). The adsorption kinetics of Sr ion and Cs ion with SAN-Zeolite beads were fitted well by the pseudo-second-order model. The maximum adsorption capacities of Sr ion and Cs ion calculated from Langmuir isotherm model were 66.97 mg/g and 81.97 mg/g, respectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.229-238
• /
• 2024

This study evaluated the odor removal performance of a bacteria-based odor reduction kit. The bacteria used were Rhodobacter capsulatus, Paracoccus limosus, and Brevibacterium hankyongi, which can remove ammonia (NH₃), hydrogen sulfide (H₂S), total nitrogen (T-P), and total phosphorus (T-N), which are odor pollutants. The materials used were bacteria and porous aggregates (expanded vermiculite, zeolite beads, activated carbon), and the combination of the materials varied depending on the removal mechanism. Materials with a physical adsorption mechanism (zeolite beads and activated carbon) gradually slowed down the concentration reduction rate of odor pollutants (NH₃, H₂S, T-P, and T-N), and had no further effect on reducing the concentration of odor pollutants after 60 hours. Expanded vermiculite, in which bacteria that remove odors through a bio-adsorption mechanism were immobilized, had a continuous decrease in concentration, and the concentration of odor pollutants reached 0 ppm after 108 hours. As a result, the odor removal performance of materials with physical adsorption mechanisms in actual river water did not meet the odor emission standard required by the Ministry of Environment, while the expanded vermiculite immobilized with bacteria satisfied the odor emission permissible standard and achieved water quality grade 1.

• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.671-678
• /
• 2015

The adsorption characteristics of Sr and Cs ions were investigated by using PS-zeolite beads prepared by immobilizing zeolite with polysulfone (PS). The adsorption kinetics of Sr and Cs ions by PS-zeolite beads was described well by the pseudo-second-order model. The maximum adsorption capacities of Sr and Cs ions calculated from Langmuir isotherm model were 65.0 mg/g and 76.4 mg/g, respectively. In the binary system of Sr ion and Cs ion, the adsorption capacities of each ion decreased with increasing mole ratio of mixed counterpart ion, and Cs ion showed the higher hinderance than Sr ion. We found that thermodynamic properties of Sr and Cs ions on absorption reaction were spontaneous and endothermic at 293 to 323 K.

• Journal of Environmental Science International
• /
• v.25 no.12
• /
• pp.1613-1622
• /
• 2016

Zeolite (FZ), prepared from fly ash, was immobilized with polyacrylonitrile (PAN) to fabricate PAN/FZ beads. The prepared PAN/FZ beads were characterized by scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The optimum ratio to prepare PAN/FZ beads was 0.3 g of PAN to 0.3 g of FZ. The diameter of the prepared PAN/FZ beads was about 3 mm. Sr and Cu ion adsorption experiments were conducted with PAN/FZ beads. A pseudo-second-order model fit the kinetic data for Sr and Cu ion adsorption by PAN/FZ beads well. The equilibrium data fitted well with the Langmuir isotherm model, and the maximum adsorption capacities were 96.5 mg/g and 74.6 mg/g for the Sr and Cu ions, respectively. Additionally, the values of thermodynamic parameters such as Gibbs free energy (${\Delta}G^o$), enthalpy (${\Delta}H^o$) and entropy (${\Delta}S^o$) were determined. The positive values of ${\Delta}H^o$ revealed the endothermic nature of the adsorption process and the negative values of ${\Delta}G^o$ were indicative of the spontaneity of the adsorption process.