• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.524-530
• /
• 2019

Purpose: In this paper, we construct a detailed three-dimensional interface element using a three-dimensional analysis program, and evaluate the composite behavior stability of the connector by applying physical properties such as the characteristics of general members and those of reinforced members Method: The analytical model uses solid elements, including non-linear material behavior, to complete the modeling of beam structures, circular flanges, bolting systems, etc. to the same dimensions as the design drawing, with each member assembled into one composite behavior linkage. In order to more effectively control the uniformity and mesh generation of other element type contact surfaces, the partitioning was performed. Modeled with 50 carbon steel materials. Results: It shows the displacement, deformation, and stress state of each load stage by the contact adjoining part, load loading part, fixed end part, and vulnerable anticipated part by member, and after displacement, deformation, The effect of the stress distribution was verified and the validity of the design was verified. Conclusion: Therefore, if the design support of the micro pile is determined based on this result, it is possible to identify the Vulnerable Parts of the composite behavior connector and the degree of reinforcement.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.7-12
• /
• 2009

PLGA microspheres have been known as an injectable system for tissue engineering. The purpose of this study was to investigate the condition of emulsion formation and cell adhesion on the microsphere surface. BSA-loaded PLGA microsphere was fabricated by oil-in-water (O/W) and water-in-oil-in-water (W/O/W) solvent evaporation method. Sodium alginate was dissolved in water phase to control initial burst release and to improve lag time by PLGA bulk degradation. In addition, the morphology of cells attached on the micro spheres was studied using a scanning electron microscopy (SEM). Cellular proliferation behavior of human disc cells cultivated on PLGA micro spheres was analyzed using a MTT assay. MTT assay revealed that the cells can attach and proliferate on PLGA microspheres. According to these results, we concluded that BSA -loaded alginate/PLGA microspheres can be used as an injectable system for tissue engineering application.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.1
• /
• pp.46-57
• /
• 2003

This study was carried out to investigate the characteristics of the soluble sericins after degumming and after hydrolysis of insoluble sericin with various enzymes. Especially, the hydrolysis characteristics were examined in terms of molecular weight of the soluble sericin. Amino acid composition and molecular weight characteristics of the soluble sericins were also studied. When the insoluble sericin was hydrolyzed with kojizyme and flavourzyme, the solubility was highest at pH 7 and 50$^{\circ}C$. On the other hand, in the cases of protamex and alcalase, the highest solubility was obtained at 60$^{\circ}C$. In these cases, solubility increased with pH. In enzymatic hydrolysis, the solubility was increased with concentration of enzymes until 4 hours. After then, a slight difference was found along with treatment times. In enzymatic hydrolysis, the absorbance of the soluble sericin was increased with concentration of enzymes and treatment times. Average degree of polymerization was decreased with treatment time and concentration. The amino acid compositions were similar in low(low molecular weight by degumming) and high (high molecular weight by degumming). Those of PK (soluble sericin hydrolyzed with kojizyme), PP (soluble sericin hydrolyzed with protamex), and PA(soluble sericin hydrolyzed with alcalase) were similar to each other. Serine and tyrosine compositions were higher in low and high than those of PK, PP, and PA. However proline was absent in low and high. Molecular weights of the various sericins became higher as KP>high>PP>low>PA and those of KP and PA were 9,800 and 905 respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.167-167
• /
• 2013

최근에 산화물 형광체는 황화물 형광체에 비해 높은 화학적 안정성을 나타내기 때문에 백색 발광 다이오드, 전계방출 디스플레이와 플라즈마 디스플레이 패널에 그 응용성을 넓히고 있다. 마그네슘 니오베이트(magnesium niobate, MgNb2O6)는 우수한 유전 특성(상대 유전상수=18.4)을 나타내기 때문에 마이크로파 유전체로 응용 가능하며, 단일상 릴랙서 페라브스카이트(relaxor perovskite) Pb(Mg1/3Nb2/3)O3을 합성하기 위한 전구체 (precursor)로 널리 사용되고 있으며, 나이오븀산염 이온에서 다양한 색상을 방출하는 활성제 이온으로 효율적인 에너지 전달이 일어남으로써 Sm3+, Dy3+, Eu3+와 같은 희토류 이온의 좋은 모체 격자로 개발할 수 있다. 본 연구에서는 마그네슘 니오베이트 MgNb2O6 모체 결정에 다양한 활성제 이온, 즉 Eu3+, Sm3+, Dy3+, Tb3+를 선택적으로 주입하여 발광 효율이 높은 천연색 형광체를 합성하고자 한다. 특히, 모체 결정에 주입되는 활성제 이온 주위의 국소적인 환경이 반전 대칭에서 변형되는 척도를 조사하여 활성제의 주 발광 파장의 세기가 최대가 되는 최적의 조건을 결정하고자 한다. Mg1-1.5xNb2O6:REx3+ 형광체 분말 시료는 초기 물질 MgO, Nb2O5와 희토류 이온을 화학 반응식에 맞게 정밀 저울로 측량하여 플라스틱 용기에 ZrO2 볼과 함께 넣고, 소정의 에탄올을 채운 뒤 밀봉하고서, 300 rpm의 속도로 20시간 볼밀 (ball-mill) 작업을 수행하였다. 그 후, 체(sieve)로 ZrO2 볼을 걸러낸 다음에 혼합된 용액을 각 비커에 담아서 $40^{\circ}C$의 건조기에서 24시간 건조하였고, 건조된 시료를 막자 사발에 넣고 잘게 갈고 80 ${\mu}m$의 체로 걸러낸 후에, 알루미나 도가니에 활성제 이온별로 각각 담아, 전기로에 장입하여 매분당 $5^{\circ}C$의 비율로 온도를 상승시켜 $350^{\circ}C$에서 5시간 동안 하소 공정을 실시한 후에, 온도를 계속 일정한 율로 증가시켜 $1,200^{\circ}C$에서 5시간 동안 소성하여 합성하였다. 합성된 형광체 분말의 결정 구조는 $Cu-K{\alpha}$ 복사선(파장: 1.5406)을 사용하여 X-선회절장치로 측정하였으며, 형광체의 표면 형상은 전계형 주사전자현미경으로 관측하였다. 흡광와 발광스펙트럼은 제논 램프를 광원으로 갖는 형광 광도계를 사용하여 측정하였다. 모체 결정에 활성제 이온 Eu3+, Sm3+, Dy3+, Tb3+가 도핑된 형광체 분말은 각각 적색, 주황색, 황색, 녹색 발광이 관측되었다. 각 발광 스펙트럼과 결정 입자의 크기와 형상 사이의 상호 관계를 조사하였다. 실험 결과로부터, 각 형광체의 발광 파장은 활성제 이온의 종류 와 서로 밀접하게 관련되어 있으며, 형광체 시료 합성시 활성제 이온의 농도를 선택적으로 조절함으로써 발광의 세기를 제어할 수 있음을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.463-469
• /
• 2009

We performed the experimental study on the control of suspended dust in a cement packaging process for various ventilation systems. To effectively remove the dust generated in the cement packaging process, three different kinds of ventilation system, such as local exhaust ventilation, electrostatic scrubber, and local air supply system, were adopted. Dust concentrations in the packaging process were measured with the variation of the airflow rate of the ventilation systems and then their ventilation performance were evaluated. From the results, we knew that the ventilation performance was the best when the local exhaust ventilation and the electrostatic scrubber were simultaneously operated in the packaging process. In the electrostatic scrubber system, the effect of the airflow rate on the indoor dust removal efficiency was negligible so hat he system ust be operated at $2,700m^3/h$ for saving power consumption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.600-608
• /
• 2016

This paper proposes a new high-efficient interleaved phase-shift full-bridge (PSFB) converter for low-voltage and high-current power systems. The proposed converter is composed of three switch-bridges and two transformers in the primary side and two rectifiers in the secondary side. Each transformer handles half of the total power with an interleaved operation, so that the proposed converter has high system reliability, as much as the conventional interleaved PSFB converter. The soft-switching characteristics of the proposed converter are better than those of the conventional converter due to the modulated primary side configuration. The proposed converter represents a single lagging-leg bridge, which has a poor soft switching condition in its operation, while the conventional converter has two lagging-leg bridges in its operation. Therefore, the number of switches having hard-switching conditions is reduced by half in the proposed converter. In addition, the reduced switch counts in the primary side of the proposed converter helps decrease the complexity of the proposed converter compared to that of the conventional converter. The operational principle and analysis are presented in this paper and the characteristics are verified using a PSIM simulation with 3kW server power specification.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.54-60
• /
• 2017

In this study, we investigated the effect of $TiCl_4$ injection time on the Kroll reaction at a given weight ratio of $TiCl_4$ and Mg. The reduction reaction was investigated by measuring the temperature change according to $TiCl_4$ injection time and observing the cross section and appearance of the Ti sponge after the reaction. The temperature increment due to Kroll reaction heat generation was found to be linearly proportional to the $TiCl_4$ feed rate. In the graph of $TiCl_4$ injection time and reduction tank temperature, initial temperature peaks were observed irrespective of the injection conditions. This is interpreted to mean a temporary interruption of reaction due to $MgCl_2$ formation after the initial Kroll reaction. In addition, when the cross section of the sponge was observed, a large amount of spherical Mg particles was observed in $MgCl_2$. We can infer that this is the process of continuously feeding the unreacted Mg surface, so that a continuous Kroll reaction takes place. The sponge appearance showed that the coalescence or growth of the Kroll reacted Ti particles can be controlled by the cooling rate.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.357-364
• /
• 2014

The first mission for the IoT based hyper-connectivity communication is developing a device-to-device communication technique in infra-less low-power and lossy networks. In a low-power and lossy wireless network, IoT devices and routers cannot keep the original path toward the destination since they have the limited memory. Different from the previous light-weight routing protocols focusing on the reduction of the control messages, the proposed scheme provides the light-weight IPv6 address auto-configuration, IPv6 neighbor discovery and routing protocol in a IoT capable infra-less wireless networks with the bloom filer and enhanced rank concepts. And for the first time we evaluate our proposed scheme based on the modeling of various probability distributions in the IoT environments with the lossy wireless link. Specifically, the proposed enhanced RPL based light-weight routing protocol improves the robustness with the multi-paths locally established based on the enhanced rank concepts even though lossy wireless links are existed. We showed the improvements of the proposed scheme up to 40% than the RPL based protocol.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.709-720
• /
• 2019

Due to global warming and abnormal climate, the incidence and scale of green tracts in rivers and water intake dam are increasing every year. Therefore, in this study, developed eco friendly positively charged Torrefied Wood Flour(TWF) coagulant by reusing wood damaged by blight as a natural material. In order to evaluate the effect of coagulant on water ecosystem, green algae contaminated water was collected and TOC showed high removal rate of 86% ~ 92% under 1% and 5% TWF C-PAM treatment condition. The $NH_3-N$ showed 53% removal efficiency. The average pH of the polluted water was 7.9 in the case of hydrogen ion concentration, and the pH of the treated water was in the range of 6.5 ~ 7.7, It was found to be suitable for water quality standards. In ecotoxicity tests, all the results of the experiment showed that both the number of green algae and that of treated water were not affected by the survival of the daphnia. Therefore, as a result of the analyzing, developed paste type TWF coagulants is considered to be able to remove algae using natural resources.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.413-413
• /
• 2019

하천과 호수에서 남조류의 이상 과잉증식 문제(이하 녹조문제)는 담수생태계의 생물다양성을 감소시키며, 음용수의 이취미 원인물질을 발생시켜 물 이용에 장해가 된다. 또한 독소를 생산하는 유해남조류가 대량 증식할 경우에는 가축이나 인간의 건강에 치명적 해를 끼치기도 한다. 그 동안 국내에서 녹조문제는 댐 저수지와 하구호와 같은 정체수역에서 간헐적으로 문제를 일으켰으나, 4대강사업(2010-2011)으로 16개의 보가 설치된 이후 낙동강, 금강, 영산강 등 대하천에서도 광범위하게 발생되고 있어 중요한 사회적 환경적 이슈로 대두되었다. 한편, 대하천에 설치된 보 구간에서 빈번히 발생하는 녹조현상의 원인에 대해서는 전 지구적 기온상승에 따른 기후변화의 영향이라는 주장과 유역으로부터 영양염류의 과도한 유입, 가뭄에 따른 유량감소, 보 설치에 따른 체류시간 증가 등 다양한 의견이 제시되고 있으나, 대상 유역과 수체의 특성에 따라 녹조 발생의 원인이 상이하거나 또는 다양한 요인이 복합적으로 작용하기 때문에 보편적 해석(universal interpretation)이 어려운 것이 현실이다. 따라서 각 수계별, 보별 녹조현상에 대한 정확한 원인분석과 효과적인 대책 마련을 위해서는 집중된 실험자료와 데이터마이닝 기법에 근거로 한 보다 과학적이고 객관적인 접근이 이루어져야 한다. 본 연구에서는 2012년 보 설치 이후 남조류에 의한 녹조현상이 빈번히 발생하고 있는 낙동강 4개보(강정고령보, 달성보, 합천창녕보, 창녕함안보)를 대상으로 집중적인 현장조사와 실험분석을 수행하고, 수집된 기상, 수문, 수질, 조류 자료에 대해 통계분석과 다양한 데이터모델링 기법을 적용하여 보별 남조류 우점 환경조건과 이를 제어하기 위한 주요 조절변수를 규명하는데 있다. 연구대상 보 별 수질과 식물플랑크톤의 정성 및 정량 실험은 2017년 5월부터 2018년 11월까지 2년에 걸쳐 실시하였으며, 남조류 세포수 밀도와 환경요인과의 상관성 분석을 실시하고, 단계적 다중회귀모델(Step-wise Multiple Linear Regressions, SMLR), 랜덤포레스트(Random Forests, RF) 모델과 재귀적 변수 제거 기법(Recursive Feature Elimination using Random Forest, RFE-RF)을 이용한 변수중요도 평가, 의사결정나무(Decision Tree, DT), 주성분분석(Principal Component Analysis, PCA) 기법 등 다양한 모수적 및 비모수적 데이터마이닝 결과를 바탕으로 각 보별 남 조류 우점 환경요인을 종합적으로 해석하였다.