• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.85-86
• /
• 2016

본 논문은 스위칭 주파수 스펙트럼 분석에 기반한 모듈형 병렬 양방향 DC-DC 컨버터의 전류분배 제어방법을 제안한다. 병렬 DC-DC 컨버터 각 모듈의 전류분배 균일도 향상은 동작안정성 확보, 효율 및 신뢰성 향상을 위해 매우 중요한 요소이다. 드룹 제어의 적용을 통해 별도의 통신연결 없이 각 병렬모듈간 전류 분배량 제어가 가능하지만, 선로 저항의 차이나 측정 소자의 편차가 발생할 경우 각 모듈간 균일한 전류분배가 어려운 문제가 존재한다. 각 모듈간 전류분배를 위해 각 개별모듈의 입력 전류에 존재하는 스위칭 주파수 성분만을 분석하여 병렬 모듈 사이의 전류분배 차이를 검출하고, 그 차이를 최소화 하도록 드룹 이득을 단계적으로 조절하는 제어 알고리즘을 제안한다. 제안된 제어 알고리즘은 에너지 저장장치와 연계된 380V급 DC 배전 시스템 모델을 대상으로 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.223-224
• /
• 2012

본 논문은 퍼지 기반의 토크 분배 함수를 이용한 스위치드 릴럭턴스 모터의 토크 맥동 저감 기법을 제안한다. 일반적으로 스위치드 릴럭턴스 모터의 토크 맥동 저감 기법은 선행된 실험결과와 모터 파라미터의 변화에 대한 관측을 통해 오프라인으로 토크 분배 함수를 최적화한다. 이때, 모터의 높은 인덕턴스는 전류가 토크 분배 함수를 잘 추종하지 못하게 하여 의도치 않은 토크 맥동을 유발한다. 게다가 오프라인으로 토크 분배 함수를 계산하기 때문에 모델의 오차 및 변화에 따라 보상 성능이 저하 될 수 있다. 제안하는 제어기법은 퍼지 제어기를 이용하여 순시적으로 토크 분배 함수의 형상을 정정함으로써 토크 맥동을 저감한다. 시뮬레이션 결과를 통해 제안하는 제어기법의 우수성을 보인다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.61-70
• /
• 2017

Robust thrust distribution method of solid DACS is researched. For the case of the system which has higher number of actuation nozzles than the degree of freedom of thrust to be controlled, the robust thrust allocation law which accommodate the abnormal operation is suggested. Assuming the situation that some nozzles are uncontrollable, the error between nozzle throat area command and response can be calculated. The error is used for realtime reshaping of weighting matrix. From the weighting effect, the nozzle which operated abnormally has low responsibility for the command then, the thrust error is reduced. The suggested algorithm is verified by the simulation of abnormal operation condition of DCS and ACS nozzle respectively.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.9-16
• /
• 2015

The control law for simultaneous pressure and thrust control of solid DACS(Divert Attitude Control System) is suggested. To regulate the two variables effectively, the control structure of sequential loop closer is applied to the system considering the physical characteristics of each variable and the weighted pseudo-inverse method is suggested to allocate effective command for indeterminate system. Also, the pressure guidance law for safe and high acceleration is applied to the homing stage to verify the effectiveness of the command distribution.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.1
• /
• pp.71-78
• /
• 2017

The electrical power system of Korean Utility Helicopter(KUH) is designed as a dual control system to enhance the system safety of aircraft and each system is installed separately at left and right of the aircraft. The system is composed of 2 AC generators, 1 APU generator, 2 Transformer Rectifier Units(TRU), AC/DC Electrical Master Box(AC/DC EMB). The AC/DC EMB, consists of 2 AC EMB and 2 DC EMB, is essential equipment which supply and distribute electric power to the aviation electronics and electrical equipment of KUH. There were defects caused by internal short circuit in AC EMB during the first production phase of the KUH. This paper describes the analysis of the defects, troubleshooting process, root cause, and the solution by design change.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.321-327
• /
• 2003

As the continuous casting process is to product slab with high temperature liquid steel, the main role of strand driven roll is to withdraw slab from mold as operator set up casting speed pattern. The strand driven roll in old cast machine is controlled casting speed only. Due to inaccuracies in drive setting up, varying roll diameters, bulging in the product, withdrawal force was distributed irregularly. As a result, because of horizontal crack in slab comer, high casting speed can't be achieved. In this paper, the correlation between the distribution of withdrawal force and slab quality is investigated and the new control algorithm which can be distributed regularly the withdrawal force of strand driven roll is proposed. The principle of proposed algorithm is not to control motor torque directly but to control motor speed reference according to sharing ratio of withdrawal force which is set up in high level controller. The proposed algorithm implemented in POSCO Kwangyang 1-4 continuous casting plant.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.182.1-182.1
• /
• 2012

태양전력 조절기는 태양전지에서 전력을 생성하여 배터리를 충전하고 인공위성의 모든 부하에 전력을 공급하는 역할을 한다. 이러한 태양전력 조절기는 신뢰성 확보와 대전류 처리를 위해 병렬운전한다. 병렬운전 시 전류가 각 태양전력 조절기에 균등하게 분배되지 않을 경우, 한 태양전력 조절기에만 과도한 전류가 흐르게 되고 해당 태양전력 조절기에 문제가 발생한다. 따라서 병렬운전 하는 각 태양전지 조절기에 전류를 균등하게 분배하기 위해 전류 제어기가 필요하다. 전류 제어 방식에는 Inner Loop방식과 Outer Loop 방식이 있다. Inner Loop방식은 전류 제어기가 태양전력 조절기의 전류를 제어하고, 전류 제어기의 기준 전압을 외부의 전압 제어기가 제어하는 방식이다. 한편, Outer Loop 방식은 전압 제어기가 태양전력 조절기의 전압을 제어하고, 전압 제어기의 기준 전압에 태양전력 조절기의 전류 정보를 더하여 전압을 제어하면서 간접적으로 전류를 제어하는 방식이다. 한편, 태양전지는 전압과 전류가 강한 비선형성 관계를 가지므로 태양전지의 동작점에 따라 태양전력 조절기의 소신호 특성이 변화하고, 이는 전류제어기 안정도에 심각한 영향을 미친다. 따라서 본 논문에서는 태양전지의 각 동작점에 관계없이 전류 제어기가 안정적으로 태양전력 조절기의 전류분배를 수행할 수 있도록 Inner Loop방식과 Outer Loop방식의 전류 제어기를 해석하고 두 방식을 비교한다.

• Journal of Internet Computing and Services
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2001

In this paper, we define requirements for call distribution of service control logic in Intelligent Network, Also, we propose call distribution mechanism for every subscriber with different call distribution rates, The call distribution mechanism had been developed as a function of Premium-rate Service in Intelligent Network. Our call distribution mechanism applies to percentage distribution instead of circular or hierarchical distribution. The call distribution mechanism consists of call input. output. call distribution processing logic part, random number generator, and customers database. We propose the practical implementation of a call distribution mechanism and call distribution decision indicating number computation method. We show three methods, the rand() function in C language, microsecond by system clock, and proposed algorithm, to get call distribution decision indicating number. In order to optimal call distribution mechanism, we estimated the results of three methods on occurrence values and the number of occurrences.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.315-321
• /
• 2014

This paper presents an integrated chassis control system with fail safety using optimum yaw moment distribution for a vehicle with steer-by-wire and brake-by-wire devices. The proposed system has two-level structure: upper- and lower-level controllers. In the upper-level controller, the control yaw moment is computed with sliding mode control theory. In the lower-level controller, the control yaw moment is distributed into the tire forces of active front steering(AFS) and electronic stability control(ESC) with the weighted pseudo-inverse based control allocation(WPCA) method. By setting the variable weights in WPCA, it is possible to take the sensor/actuator failure into account. In this framework, it is necessary to optimize the variables weights in order to enhance the yaw moment distribution. For this purpose, simulation-based tuning is proposed. To show the effectiveness of the proposed method, simulations are conducted on a vehicle simulation package, CarSim.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.12
• /
• pp.997-1003
• /
• 2016

This paper presents an application of adaptive algorithms for yaw moment distribution with electronic stability control (ESC) and active rear steering (ARS) in integrated chassis control (ICC). Integrated chassis control consists of upper- and lower-level controllers. In the upper-level controller, the control yaw moment is computed with sliding mode control required to stabilize a vehicle. In the lower-level controller, adaptive algorithms are applied to determine the required brake pressure of ESC and the necessary steering angle of ARS, in order to generate the control yaw moment. Simulation is performed using the vehicle simulation package CarSim to validate the proposed method.