• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.105-105
• /
• 2017

actuator system은 조선, 제철, 석유화학 및 중공업 등 다양한 분야에서 각종 유량 및 공기압 등을 제어하는 밸브에 필수적으로 사용되는 핵심 부픔이다. 최근 유정 개발 등 해양구조물 설치 조절이 복잡화 되면서 본 부품이 해양산업에 사용되는 빈도가 증가하고 있다. 이 경우 본 부품이 염분이 많은 바닷물 또는 주변 환경에 직접 노출되기 때문에 내식성이 매우 엄격하게 관리되고 있다. 본 부품에 부식이 발생할 경우 control system의 작동을 지배하는 구성 품에 부식이 발생하여 actuator로서 기능을 상실하여 오동작이나 설비 가동이 중단되는 사례가 빈번하다. 현재 본 부품의 내식성 향상을 위해서는 금속기 표면에 페인트를 사용하는 방법이 가장 널리 사용되고 있는 방법이다. 이 경우 금속 표면과 도장 면과의 사이에 기포발생이나 이물질 유입 등으로 인한 밀착성이 감소되거나 blister 등으로 인하여 도장 코팅 면이 박리되는 사례가 빈번하다. 이를 방지하기 위해서 최근 고 밀착성 내식용 도장 방법을 적용하고 있으나, 이 방법으로 도장한 부품의 표면에 충격 등으로 인한 결함이 발생할 경우 pitting corrosion 등 급격한 부식이 발생하여 이에 대한 근본족인 대책 수립이 절실한 실정이다. 본 연구에서는 근본적으로 금속기 표면과 밀착성이 우수한 화성피막 용액을 이용하여 희생양극에 의한 내식성을 확보하고, 다양한 용도에 적합한 색상 도료를 화성피말 위에 적용하여 화성피막 층의 보호 및 actuator의 목적에 맞는 도장을 하였다. 희생 양극효과를 극대화 할 수 있는 최적 화성피막 층은 $15{\mu}m$이며 이때 1,000시간 이상의 내식성을 확보하였다. 이 경우 이론적인 내식 수명은 2년으로 추정할 수 있었다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.1
• /
• pp.70-79
• /
• 2003

In this paper, T5 28-watt fluorescent lamp ballast using a piezoelectric transformer is fabricated and its characteristic is investigated. Developed electronic ballast is composed of basic circuits and blocks, such as rectifier part, active power factor corrector part, frequency oscillation part using microcontroller and feedback control, piezoelectric transformer and resonant half bridge inverters. The fabricated ballast uses to variable frequency methode in external so exciting that the frequency of piezoelectric transformer could be generated by voltage control oscillator using microcontroller(AT90S4433). The current of fluorescent lamp is detected by feedback control circuit. The signal of inverter output is received using Piezoelectric transformer, and then its output transmitted to fluorescent lamp. Traditional electromagnetic ballasts operated at 50-60Hz have been suffered from noticeable flicker, high loss, large crest factor and heavy weight. A new electronic ballast is operated at high frequency about 75kHz, and then Input power factor, distortion of total harmonic and lamp current crest factor are measured about 0.9!35, 12H and 1.5, respectively Accordingly, the traditional ballast is by fabricated electronic ballast using piezoelectric transformer and voltage control oscillator because of its lighter weight, high efficiency, economic merit and saving energy.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.429-432
• /
• 2011

The feasibility of applications of the char obtained from a gasification process of municipal-waste refuse derived fuel (RDF) as an auxiliary fuel was evaluated by combustion experiments. The higher heating value of the RDF char was 3000~4000 kcal/kg and its chlorine content was below the standard requirement demonstrating its potential as an auxiliary fuel. In the combustion exhaust gas, the maximum $NO_x$ and $SO_2$ concentrations were 240 ppm and 223 ppm, respectively. If an aftertreatment is applied, it is possible to control their concentrations low enough to meet the air pollutant emission standard. The HCl concentration was relatively high indicating that a care should be taken for HCl emission from the combustion of RDF. Based on the temperature distribution within the reactor, the concentration change of $O_2$ and $CO_2$, and the amount and the loss on ignition of solid residue, it was inferred that the combustion reaction was the most reliable when the excess air ratio of 1.3 was used.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.8
• /
• pp.1107-1113
• /
• 2018

Ultrasonography and photodynamic therapy have been proposed as useful tools as a treatment for inducing necrosis of cells using reactive oxygen species. Apoptosis is an internal mechanism necessary for cells regardless of damage. Ultrasound has the effect of inducing the apoptosis of these cells, and the frequency of 1 MHz is the most applicable area for medical use. The laser which is generally used in photodynamic therapy has a heat reaction and the treatment is limited. However, as a small light emitting diode is developed, it shows possibility to minimize the equipment and reduce heat reaction. On the other hand, there are relatively few researches on direct effects of light compared with studies using photosensitizers, and the area is also limited. Therefore, in this paper, we have developed a cancer cell proliferation control module using ultrasonic and light emitting diodes, which have relatively few side effects, and quantitatively analyze the effect of the module to propose an optimal suppression technique.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.2
• /
• pp.147-156
• /
• 2021

We report fluid inclusion study results of copper-bearing quartz veins in Zogdor area, which is located within the Gurvansayhan island arc terrane of Southern Mongolia. At the Zogdor area, structurecontrolled copper mineralization is hosted in granodiorite-porphyry, which emplaced in the late Cretaceous formation. Within this granodiorite porphyry, copper-bearing quartz veins are associated with the hydrothermal alteration that includes quartz-epidote-magnetite, and quartz-magnetite in the propylitic zones. The veins are classified into two types, according to their mineral composition, which occur mainly as chalcopyrite, rare amounts of bornite, magnetite, and pyrite. Fluid inclusions in the quartz veins from the quartz-magnetite±chalcopyrite and quartz-epidote-magnetite veins are two-phase aqueous inclusions having bubble sizes of 5-30 vol.%, evident salinities of 2.0-22.6 wt.% NaCl, and homogenization temperatures of 107-270℃. Based on mineral assemblages of the observed veins, along with the geochemical properties and alteration faces of the host rock, fluid inclusion data show that the study area corresponds to propylitic alteration zone in the porphyry Cu related mineralization.