• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1943-1952
• /
• 2011

Rail vehicle brakes partly or completely transform the kinetic energy of moving vehicles into other forms of energy, in order to reduce the speed, and if necessary to bring them to a halt. To fulfil these requirements, the effect of a certain brake force is necessary and especially it is considered that the brake force is a important device to rail vehicles as a mass transit. The brake distance is a criterion for measuring brake force. The brake force is measured via dozens of brake distance test before its service operation. The brake distance is influenced by cars and rail conditions; weight of cars, speed on the verge of braking, temperature of brake disk and condition of the upper side of rail, etc. Therefore we will study how the these factors impact with the brake distance via a real test results.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.34-35
• /
• 2011

특수 전기자동차 시스템에서는 기존 자동차 대비 차량 동력 특성, 제한된 공간, 시스템 효율 특성으로 인해 다중동력시스템을 주로 적용한다. 본 연구에서는 인버터를 통해 구동한 후 제동시 발생되는 전기에너지 즉, 회생에너지를 이용한 배터리 사용시간 증대의 효과를 가지는 특수 전기자동차의 회생제동 시스템의 구성, 개념도 및 제동원리에 대하여 서술하였다. 제안한 시스템의 검증을 위해 PSIM시뮬레이션을 수행하여 본 논문에서 제안한 회생제동 시스템이 특수 전기자동차에서 유용함을 확인하였다.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.786-791
• /
• 2007

Korean high speed train(HSR-350x) has adopted a combined electrical and mechanical(friction) braking system. Brake blending control unit(BBCU) controls each brake system to fulfill the required brake performances such as braking distance, deceleration and jerk. Also the braking system should be designed considering the economical management, such as effective use of generated braking energy and the minimum wear of friction materials(a pad and a brake shoe). In this paper, we establish the disc braking force pattern that reduces the wear of pad in the disc braking system by minimizing the variance of the instantaneous disk baking energy during braking time, and compare the wear mass of pad between the conventional disc braking force pattern and the established results.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.4 no.4
• /
• pp.52-60
• /
• 1990

회수되는 에너지가 적거나 제동이 빈번하지 않은 시스템에서는 동적 제동이 적합하다. 본 논문에서는 제어 가능한 스위치를 하나만 사용한 여러회로중 전류의 연속성, 회로의 간단성, 정격보다 큰 전압에서의 스위치 전압 등을 비교 분석하여 간단하면서도 효율적인 회로를 선택 제안하였다. 실험을 통해 제안된 회로가 만족할만한 결과를 보였다.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.75-76
• /
• 2017

본 논문에서는 속도에 따른 순시 최대 회생에너지를 갖는 제동기법이 제안되었다. 제안하는 기법을 기존 전동기 구동시스템에 적용시키기 위해 주변기기를 추가하지 않고 특정속도에서 최대 회생에너지를 갖는 토크를 발생시켜 전동기를 제동하였다. 또한 제안하는 기법의 회생 에너지가 기존의 기법보다 증가함을 시뮬레이션을 이용하여 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.43-45
• /
• 2002

본 논문은 SRM의 4상한 운전 조건 중 주스위치의 고정된 스위치 온과 오프각을 가진 PWM 제동제어 방식에 대해 해석하였다. 평균 제동 토오크는 포화되지 않은 자기회로에서 계산되어진다. 또한 여자구간과 커뮤테이션 구간에서의 에너지를 해석하였다. 제안한 PWM 제동제어 방식을 6/4SRM에 적용하여 그 타당성을 검증하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.119-126
• /
• 2003

The simulator of a vehicle equipped with hydrostatic transmission and hydraulic accumulator type-braking energy regeneration system is developed using a PC. The simulator receives the accelerator pedal angle and the brake pedal angle generated by the operator using the keyboard, updates the state variables of the energy regeneration system responding to the input signals, and draws the moving pictures of the accumulator piston, pump plate angle and pump/motor plate angle every drawing time on the PC monitor. Also, the operator can observe the accel pedal angle, brake pedal angle, pressures of accumulators, vehicle speed, hydraulic torque, engine torque and air brake torque representing the operation of braking energy regeneration system through the PC monitor every drawing time. The simulator can be a very useful tool to design and improve the braking energy regeneration system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.180-186
• /
• 2004

The simulator of a vehicle equipped with mechanical transmission and hydraulic accumulator type-braking energy regeneration system is developed using a PC. The simulator receives the shift lever position, the accelerator pedal angle and the brake pedal angle generated by the operator using the keyboard, updates the state variables of the energy regeneration system responding to the input signals, and draws the moving pictures of the accumulator piston and pump/motor plate angle every drawing time on the PC monitor. Also, the operator can observe the shift lever position, the accel pedal angle, brake pedal angle, pressures of accumulators, vehicle speed, hydraulic torque, engine torque and air brake torque representing the operation of braking energy regeneration system through the PC monitor every drawing time. The simulator can be a very useful tool to design and improve the braking energy regeneration system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.4
• /
• pp.313-321
• /
• 2002

A braking algorithm for a PM synchronous motor is presented. The resistance of the stator windings operates as a braking resistors and dissipates the regenerated power from the rotor without any braking components including the electronic power components and control circuits. The proposed braking algorithm maximizes the power dissipation in the stator windings and also generates the maximum braking torque under the limit conditions of DC link capacitor voltage and inverter currents so that it can minimize the braking time.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.368-376
• /
• 2011

An Electric railway system has the characteristics. The train powered by substations generates regenerative power when it runs on railway of various slope. A regenerative braking is an ideal system on account of reducing mechanical braking as well as recycling the energy. This study dealt with the line gradient review, train running records and power data out of substations in a bid to establish the efficient regenerative energy storage system.