• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.3
• /
• pp.18-31
• /
• 2018

Since accidents of hazardous material transport vehicle on roadways cause severe damage in the form of disaster, foreign countries have long been engaged in systematic management and establishment of relevant laws and policies for the road safety. Recently, over 10-kilometer long tunnel, such as Inje-Yangyang Tunnel and Geumjeongsan Tunnel, has been opened on the expressway and the production of various hazardous materials is increasing with the development of chemical technology. However, road laws related to the safe operation of hazardous materials transport vehicles are still lacking, and policy measures for managing them have not been specified. It is an important task to recognize the risk of accidents of hazardous material transport vehicles and to secure road safety by establishing a management plan for road managers. Therefore, this study analyzed the feasibility of the traffic regulation of expressway tunnel in South Korea and suggested a direction for management. The results of this study can be utilized as the primary data for the revision of law related to hazardous materials transport vehicles on roadways and the derivation of optimal route of hazardous materials transport vehicles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.71-74
• /
• 1991

구조물의 진동특성을 파악하기 위한 실험적 모우드 해석법에서 기진력을 제 공하는 한 방법으로 힘 측정기가 부착된 해머를 이용한 충격시험기법이 널 리 사용되고 있다. 충격해머 시험의 유용성은 기진력의 에너지가 정현파 기 진력의 경우처럼 특정 주파수대에 산재해 있는 것이 아니라 가용 주파수 영 역내에 연속적으로 분포해 있다는 점이며 이러한 충격력은 가용 주파수 범 위내에 있는 모든 고유진동형을 여가시킬 수 있다는 장점이 있다. 충격헤머 가 가지고 있는 동적특성은 구조물을 가진시키는 선형충격량의 크기를 결정 하며, 이는 다시 충격력의 크기와 가용 주파수 범위를 결정하게 된다. 일반 적으로 가진주파수 범위는 해머의 질량에 반비례하고 충격해드의 경도에 비 례하는 것으로 알려져 있다. 해머의 질량 자체가 충격력의 크기를 좌우하기 도 하므로, 가진력의 크기를 고려하여 해머의 질량이 선택되며 충격헤드는 충격시간을 조절하기 위하여 적절히 선택된다. 충격해머에 장착된 힘측정기 의 감도는 해머질량과 충격헤드의 질량 변화에 영향을 받게 되는데, 충격 시 험시 측정되는 값은 해머에 부착되어 있는 힘측정기에 가해지는 힘인 반면 구조물에 가해지는 기진력은 충격해드와 구조물사이에 발생되는 힘이다. 이 두 힘의 비는 해머 및 충격해드의 질량효과에 따라 좌우된다. 주어진 충격시 험에서 충격해머의 질량효과를 정확히 조건에 따라 감도보정을 해 주어야 한다. 충격해머의 감도보정에 대해서는 문헌[2]에 잘 나타나 있다. 본 논문에 서는 전압감도에 미치는 영향을 파악하고자 질량 효과를 고려한 수학적 모 형을 제시하고 그 모형의 타당성을 실험을 통해 검정하고자 한다.방법 을 제시하였다. 이와 아울러 제어계의 환경변화에 따른 파라메타의 변화에 적응적으로 응답이 가능해야 하는 적응 소음제어 시스템에서, 음향궤환과 함 께 필히 고려해야 하는 부가적인 전달함수의 영향을 고려한 능동 소음제어 에 대해 연구하였다. 경량화 추세에 따라 지반이나 케이싱이 경량이거나 유연하여 회전축과 동적으로 연성된 경우 회전축-베어링-지반으로 이루어진 2중구조의 회전축 계 동특성을 해석할 수 있는 프로그램을 개발하므로서 회전 기계류의 진동 전반에 걸친 문제점에 대한 그 원인과 현상을 명확히 분석하여 국내의 전기 계류의 보다 신뢰성있는 설계 및 제작자료를 확보하는데 기여할 수 있게 하 였다.존의 small molecular Gd-chelate에 비해 매우 큼을 알 수 있었다. MnPC는 간세포에 흡수된 후 담도계로 배출되는 간특이성 조영제임을 확인하였다. 장비 내에서 반복 시행한 평균값의 차이는 대체적으로 유의한 차이가 없었으나, 다른 장비에서 반복 시행한 장비간의 사이에는 유의한 차이가 있는 경우가 더 많았다. 따라서 , MRS 검사를 소뇌나 뇌교의 어떤 절환에 적용하기 전에 각 장비 마다 정상 기준치를 반드시 얻은 후에 이상여부를 판 정하는 것이 필수적이라고 생각된다.EX> 이상이 적절한 진단기준으로 생각되었다. $0.4{\;}\textrm{cm}^3$ 이상의 좌우 부피차를 보이는 모든 증례에서 육안적으로도 해마위축이 뚜렷이 나타났다. 결론 : MR영상을 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다

• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.23-46
• /
• 2007

The purpose of this study was to present improvement directions of college scholastic ability test on industry department. Industry department test were classify and abstracted sampling test on contents and movement domain, analyzed example items of college scholastic ability test on industry department. Research methods used in this study were review of related literature, the item analysis and item pattern analysis between college scholastic ability test on introduction to industry and curriculum, contents of textbook. After finding a problem of developing items, trying to find a solution to the problem and developing an up-to-date method of items was to present improvement. Based on the result of the study, some recommendations for future researches were made as follows: First, a phenomenon of making same contents items over again and no making items not on made the items ever have to cut. Second, Time to read and make sense of items have to reduce because depend on the degree of difficulty related on time to understand of items. Third, the depth of textbook contents has to develop on curriculum this year. Fourth, the succeeding study on linkage between college scholastic ability test and simulation of college scholastic ability test. Fifth, verification validity on contents of new movement domain is developed new and striking test items.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.8
• /
• pp.621-630
• /
• 2018

In the case of launch vehicles using liquid fuel, natural frequency changes due to fuel consumption after launch, and a modal test is essential to investigate its effect. However, when relying on modal test to characterize the free vibration characteristics, the testing time is excessively increased and accuracy is reduced. Therefore, this paper suggests a modal test method with finite element analysis to overcome these drawbacks. A cylindrical structure filled with liquid are considered as a study model, and modal tests and finite element analyses are performed. The modal tests are conducted by an impulsive method using an impact hammer and accelerometers. Through the comparison of the modal test and the finite element analysis results, the validity of the proposed modal test method is verified. In addition, the free vibration characteristics and the tendency for the cylindrical structure according to the liquid filled ratio were investigated.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.468-475
• /
• 2018

The current system of making course evaluations mandatory in universities in Korea in order to supplement low participation levels is a major hindering factor for the validity of the evaluation results due to students' insincere responses. This study points out the problems in course evaluations that are in the form of surveys and instead proposes a sample course evaluation system that utilizes a sample mean to deduce a population mean, attempting to prove through simulation that this is statistically significant. Thus, small, medium, and large scale courses as well as cyber courses that were available in S University in the fall 2016 semester were set as the population, and each course's evaluation average grade was set as the population mean. Furthermore, we used the average grade and standard deviation of the same courses from the previous year in order to decide the sample number, the reliability level was set as 95%, and the margin of error was set as ${\pm}0.25$. As a result of carrying out a simulation using the data analysis tool R, all the courses (small scale, medium scale, large scale, and cyber) showed to have a reliability level close to 95% including the population mean, and consequently practicality of the representative sample course evaluation system was proven.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.115-126
• /
• 2018

The purpose of this study is to examine the effects of the factors that hinder innovation of SMEs on innovation activities of Korean firms. Many existing literature studies remain focused on factors that promote innovation activities. However, in order for companies to promote innovation, it is important to analyze the factors that hinder innovation as well as those that promote innovation. In this study, we analyzed the relationship between technological innovation inhibition factors and technological innovation performance of 4,075 SMEs in Korea using the Korea Institute of Science and Technology Policy statistical data. The research model and hypothesis test of this study consist of three stages. First, the reliability of the variables used was verified using exploratory factor analysis. Second, the proposed hypothesis was modeled using structural equation modeling. Finally, validity of the structural equation was verified using confirmatory factor analysis. As a result, the lack of need for innovation influenced innovation performance and the government support system mediated them. SMEs should establish technological innovation strategies to maximize the effect of technological innovation with limited resources, and government should make polices to promote innovation of SMEs. It's expected to be used in the case of establishing a support policy.

• Geophysics and Geophysical Exploration
• /
• v.16 no.4
• /
• pp.217-224
• /
• 2013

We developed a time-lapse inversion using new cross-model constraints based on change ratio and resolution of model parameters. The cross-model constraint based on change ratio imposes the same penalty on the model parameters with equal change ratio. This constraint can emphasize the model parameters with significant change regardless of their increase or decrease. The resolution cross-model constraint imposes a small penalty on the model parameters with poor resolution, but a large penalty on the model parameters with good resolution. Thus, the model parameter with poor resolution can be effectively identified in the inversion result if they are significantly changed with time. Through the numerical tests for 3D resistivity monitoring data sets, the performance of these two cross-model constraints was confirmed. Finally, for the safety estimation of a sea dyke, we applied the developed time-lapse inversion to the 3D resistivity monitoring data that were acquired at a sea dike located in western coastal area of Korea. The result of time-lapse inversion suggested that there were no significant changes at the sea dike during the monitoring period.

• Journal of The Korean Association For Science Education
• /
• v.37 no.2
• /
• pp.263-271
• /
• 2017

Teacher reeducation is required to be comfortable with the 'Integrated science' subject as introduced in the 2015 revised curriculum. In this research, we designed in-service teacher training programs according to the types of secondary school science teacher's certificates, and developed ways to improve in-service science teachers' competencies. Through Delphi surveys with 22 science education experts, we investigated the features of the 2015 revised 'Integrated science' curriculum in light of its characteristics, purposes, contents system, contents, and so on, and explored teachers' competencies to teach the subject. Based on the analysis of the features of each type of secondary school science teachers' certification and required teacher competencies for teaching 'Integrated science', we developed three types of teacher training programs: in-service training courses for understanding the 2015 revised 'Integrated science' (Type A), in-service training courses for 'Integrated science' (Type B), and in-service teacher training certificate program for 'Integrated science' (Type C). For each teacher training program, we suggested the target of the training program in light of teacher certificates, operation systems, and ways to organize the program. In addition, we also suggested ways to improve 'Integrated science' teacher education programs for pre-service as well as in-service teachers, and examined ways to improve educational requirements for qualification in 'Integrated science' teaching based on the opinions of experts. Discussed in the conclusion are ways to design in-service teacher training programs for 'Integrated science' teaching and ways to improve 'Integrated science' teacher training.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.2
• /
• pp.262-276
• /
• 2012

Transactions activation of intangible assets has become became a key factor for corporate survival and successful business in the knowledge economy. Thus, demand in correctly valuating technology has increased. The market approach is the reliable method because of the premise that the market value of an asset is directly related to the prices of comparable, competitive ones. However, it can be practically impossible in many cases because it is hard to find identical transactions, which are generally closely guarded business secrets. As a result, most of technology valuation is conducted by the income approach and this approach is used to derive estimates for such unobserved variables. In September 2011, the Ministry of Knowledge Economy enacted a law for operational guideline standards for technology valuation to encourage the domestic technology valuation market. The enforcement recommended that the market approach have precedence over other approaches. If this approach cannot be applied, then the valuator should writing that he used other approaches. In practice, it is hard to know whether or not information about comparable transactions exists. The proposed process provides valuators to assess suitability for practical use of market approach through the observation process of technology transactions information. At the same time, it offers them the opportunity to gain validity when using other approaches.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.109-120
• /
• 2006

Part of public arts, environmental builforms not only enhance the beauty of a building, but also serve to stabilize the citizen's psychology and as a landmark having intimate values with the city environment and symbolic meanings. Thus they do have sociocultural values as an original formative artwork. The purpose of this study was to suggest evaluation and review methods and an evaluation framework for environmental builtforms, which had legal binding under the building decoration system, to a local government to improve the quality level of urban environment. It will be such a distant goal of creating a desirable urban environment as long as environmental builtforms are merely regarded as an object to follow a vogue and a mandatory passage procedure. It's important to take a perspective of an expert to set up and suggest an evaluation system in the public aspects. In the study a consideration was made of the current systems and review criteria of environmental builtforms, which was followed by the development of a theoretical research model and of a framework for statistical evaluation by a group of experts. The questionnaire designed based on the theoretical research model was tested for validity and reliability. Its pilot test results were then analyzed to verify the hypotheses. The questionnaire collected twice were statistically analyzed in exploratory and confirmatory factor analysis with the SPSSWIN 11 program. All the analysis results were used to come up with a final evaluation framework.