• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.11
• /
• pp.627-634
• /
• 2016

We investigated the characteristics of heavy metal desorption and recovery from carbon foam after plating wastewater treatment. The heavy metal desorption depends on solution chemistry because desorption occurred in HCl and $H_2SO_4 $ solution but did not occur in distilled water. Heavy metal desorption efficiency was increased using ultrasonication with desorption solution. The higher ultrasonic power and the longer reaction time improve efficiency. The copper plating rinse solution was treated reliably by carbon foam adsorbent during 200 bed volume. The adsorbed copper was dissolved using desorption solution and recovered by DC power supply. After copper recovery, the reuse efficiency of desorption solution was 84.2%.

• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.555-561
• /
• 2007

To obtain low molecular weight water soluble chitosan (LMWSC) with various molecular weights, chitosan oligosaccharides (COS) with lactic acid was separated by using ultrafilteration technique and LMWSC with a free amine group was prepared by the novel salts-removal method. The characterization of LMWSC removed the lactic acid and degree of deacetylation (DDA) were identified by FT-IR and $^1H-NMR$ spectra. Polydispersity index (PDI) was $1.278{\sim}1.499$, which indicates a relatively molecular weight distribution. To identify the potential as a gene carrier, we confirmed the transfection efficiency of COS fractioned according to molecular weight successfully and the salt-removed LMWSC using 293T cell. Also, LMWSC derivatives prepared for improvement transfection efficiency were evaluated using Balb/C mice.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.712-712
• /
• 2012

하 폐수 처리방류수를 물리적, 화학적 그리고 생물학적 기술을 이용하여 처리한 후 재활용수로 이용하고자 하는 새로운 노력들이 진행되고 있지만 국내의 경우 방류수 재활용 기술과 처리수의 재이용에 대한 평가기술이 선진국에 비해 초기 단계에 있어 이 분야에 대한 적극적인 기술개발이 요구된다. 막 분리 기술을 이용한 처리 수는 소독 등의 추가적인 처리 없이 살수용수나 수경용수로 이용이 가능하며, 잔류염소를 유지시킬 경우 화장실 세정용수로의 이용도 가능하며, 또한 후처리 기술을 조합하면 고급 공업용수 등으로 사용가능하므로 선진기술로서 수요조건에 맞게 전 후 처리를 조합한 수요자 맞춤형 재이용수 공정기술을 개발할 필요가 있다. 이에 효율적인 하 폐수 재이용을 이용하여 농업용수(축산 음용수, 첨단 수출원예용수, 첨단 농업용수, 농산업 클러스터 복합 곡물 용수), 원예용수(원예단지), 공업용수 등의 다양한 용도에 활용 가능한 수요자 맞춤형 모듈 및 공정 개발을 수행하였다. 개발된 공정은 AOP 및 막 세정 시스템을 이용한 새로운 공정으로, AOP 시스템은 전기 이온 모듈을 통해 OH 라디칼을 생성 및 염분 제거 효율을 극대화 하여 오염 물질을 산화시키는 공정이며, FDA 시스템은 탁도가 높은 원수가 과다 유입 될 경우 후단 여과 막의 부하를 줄이는 역할을 하며, 부유 물질을 여과 시킨다. 막 세정 시스템은 미세 입자를 구성된 기포를 이용하여 눈에 보이지 않는 곳 까지 세척하며, 살균 작용을 하며, 분리 막의 성능을 증대 시킨다. 이어 UF 분리 막 시스템은 원수의 미세불순물, 박테리아, 스케일 물질 등을 제거하며, NF 시스템을 통하여 미립자, 박테리아 유기 화합물 및 2가 염 제거를 하여 재이용수를 생산하는 공정을 개발하였다. 개발된 수요자 맞춤형 공정은 하수 재이용 기술의 이용 목적 및 수요자별로 맞춤형으로 운영이 가능하며, 개발된 세척 기술은 분리 막 세정 유지관리비 및 에너지를 저감 할 수 있으며, 현장 적용의 실증화 과정을 거쳐 공정 기술을 신뢰도를 향상하고, 보유 기술을 수요자 맞춤형으로 업그레이드함으로써 기술의 경쟁력 및 고품질의 하수 재이용 기술의 새로운 방향을 제시 할 수 있을 것으로 판단된다.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.659-663
• /
• 2021

10 m³/min (CMM) multi-pollutants abatement system was successfully developed by effectively integrating ozone oxidation, wet scrubbing, and wet electrostatic precipitation for the simultaneous removal of particulate matters (PMs) and NOx in a semiconductor fabrication process. The sophisticated control and optimization of operating parameters were conducted to maximize the destruction and removal efficiency of NOx. In particular, the stability test of a wet electrostatic precipitator was carried out in parallel for 30 days to validate the reliability of core parts including a power supply. An O₃/NO ratio, which is the most important operating parameter, was optimized to be about 1.5 and the optimization of wet scrubbing with a reducing agent made it possible to analyze the contribution of neutralization reaction.

• Journal of Korea Water Resources Association
• /
• v.47 no.12
• /
• pp.1135-1143
• /
• 2014

This study was carry out to evaluate of water purification in oxidation pond with filamentous algae mat. It is the water treatment process in the small rural streams to remove the organic materials and nutrients. We used the filamentous algae mat (FAM) which selectively predominate the filamentous algae to prevent the additional contamination by algae outflow, and we conducted a experiment on the water treatment process using the aquatic plants such as Eichhornia crassipes. The removal efficiencies (%) of water quality parameters were SS 80.9%, COD 74.6%, TN 76.8%, TP 84.4%, DTN 93.8% and DTP 98.3%, respectively. Temperature, a effect factor, was $21.8{\pm}5.9^{\circ}C$ during the operating period, according to temperature had no effect on the removal efficiencies of pollutants. Hydraulic retention time (HRT) strongly correlated with removal efficiencies (%) of SS and TP having r=0.414 (p<0.005), r=0.446 (p<0.005), respectively, and when HRT was 5day had highly removal efficiency (%) in SS and TP. TN and TP removal efficiency increased with ratio decreasing in both COD/TN and COD/TP of Influent.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.166-174
• /
• 2013

QRS detection of ECG is the most popular and easy way to detect cardiac-disease. But it is difficult to analyze the ECG signal because of various noise types. The important problem in recording ECG signal is a baseline wandering, which is occurred by rhythm of respiration and muscle contraction attaching to an electrode. Particularly, in the healthcare system that must continuously monitor people's situation, it is necessary to process ECG signal in realtime. In other words, the design of algorithm that exactly detects QRS region using minimal computation by analyzing the person's physical condition and/or environment is needed. Therefore, baseline wander removing method based on morphological filter for efficient QRS detection method is presented in this paper. For this purpose, we detected QRS through the preprocessing method using morphological filter, adaptive threshold, and window. The signal distortion ratio of the proposed method is compared with other filtering method. Also, R wave detection is evaluated by using MIT-BIH arrhythmia database. Experiment result show that proposed method removes baseline wanders effectively without significant morphological distortion.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.399-404
• /
• 2021

From 1 January 2020, the limit for Sulphur in fuel oil used on board ships operating outside designated emission control areas will be reduced to 0.5 %. This regulation by international maritime organization (IMO) is able to significantly reduce the amount of Sulphur oxides (SOx) discharging from ships and should have environmental advantages and health for all over the world. To meet the regulation, in these days, wet scrubber system is being actively developed. However, this process leads to make washing wastewater. In this study, we evaluated ion exchange resin system in accordance with scrubber wastewater discharge regulation by IMO. Theoretical wastewater used as feed solution of lab scale water treatment systems. The results revealed that nitrate ion was removed selectively in spite of high TDS wash wastewater solution depending on ion exchange resin property. Moreover, it was possible to improve efficiency of the system by optimizing operating conditions.

• Journal of Environmental Impact Assessment
• /
• v.32 no.5
• /
• pp.305-317
• /
• 2023

This study suggested a citizen science based model to enhance the efficacy of the managing invasive alien plants and examined whose applicability in 3 Wetland Protected Areas (Jangrok of Gwangju metropolitan city, Madongho of Goseong in South Gyeongsang Province, and Ungok of Gochang in North Jeolla Province). The process consists of (a) collecting citizen scientist including local residents of 3 protected areas and piling up information on the 4 species of invasive alien plants (Sicyos angulatus L., Solanum carolinense L., Ambrosia artemisiifolia L. and Solidago altissima L) in a information platform Ecological Information Bank (EcoBank) from September 18th to October 31th, (b) constructing distribution map containing the location and density (3 phases: individual-population-community) of target plants, (c) providing distribution map to Environment Agency and local government who is principal agent of managing invasive alien plants in 3 protected areas, and from whom (d) surveying applications of the distribution map and opinion for future supplement. As a result, citizen science based monitoring should be continued to complement the nationwide information for the field management of invasive alien plants with the expansion of target species (total 17 plants species that Ministry of Environment in South Korea designated) and period of monitoring in a year to increase the usability of surveyed information from citizen science. In the long run, effectiveness of the management of invasive alien species applied by citizen science should be reviewed including efficacy of field management process from citizen's participating in elimination project of invasive alien plants and time series distribution followed by the management of the species.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.5
• /
• pp.316-325
• /
• 2012

In this study, we suggested adequate control technology by analyzing emission process and main chemical of VOC/HAPs generated from four paint factories in Busan area. And we estimated whether Kapok fiber, which is a natural material, can be commercially used for an absorbent by testing adsorption ability. As a result of this sturdy, above 60% of VOC/HAPs was volatilized and dispersed inside the working place without conducting control system of facilities during manufacturing paints. Concentration profile of VOC/HAPs, which is volatile naturally outside the factories, is surveyed above 70% at Toluene, Ethylbenzene, and Xylene. And a result of evaluation of odor attribution level about the component whose Odor Threshold is known, it is estimated that major cause material of A, B, C factories is Toluene and that of D factory is m/p-Xylene. And that result presented design arguments such as facilities specifications, activated carbon filling volume, and replace cycle of activated carbon as control technology. Also, that result presented emission process improvement such as adsorption of central-controlled ventilation device, installation of inlet flenge, and potable cleaning process. The rate of pollutant adsorption of Kapok fiber, which is natural material, is indicated about 91.9%, 66.7%. That result validated the possibility as replacement of activated carbon.

• Membrane Journal
• /
• v.30 no.6
• /
• pp.443-449
• /
• 2020

In this study, CO2 separation experiment was performed on a CH4/CO2 mixed gas using a ceramic hollow fiber membrane contactor module (HFMC). In order to fabricate high-durability HFMC, a high-durability hollow fiber membrane was prepared and evaluated. HFMC was fabricated using the prepared hollow fiber membrane, and the experiment used a mixture of CH4/CO2 (30% CO2, CH4 balance) and monoethanolamine (MEA). During HFMC operation, the effect of gas and absorbent pressure on the CO2 removal efficiency was evaluated. The CO2 removal efficiency increased as the gas pressure increased, and the CO2 absorption flux also showed a tendency to increase with the liquid flow rate. In addition, when the CO2 absorption rate was less than 40%, LTS-1, a counter-current form where the absorbent enters from the bottom, has higher CO2 removal performance than LTS-2, a countercurrent form in which the absorbent enters from the top. and when the absorption rate was 40% or higher, LTS-2 had higher performance than LTS-1.