• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2013

In this study, one of the main aims is to build up a technical foundation for promoting the cadastral resurvey effectively and to improve the accuracy of cadastral surveying is to make use of precise surveying techniques in allowance of position errors as reference accuracy in cadastral resurvey, which is proper to obtain the sufficient accuracy of the cadastral control points, and parcel boundary points by introducing the GNSS-based surveying techniques on cadastral survey. In detail, the existing procedures and outcomes of cadastral survey were compared and analyzed for suggesting a better survey technique than that of the other techniques in a variety of aspects of capability of cadastral survey. The new skills and supports could be upmost importance when doing cadastral survey. What's more, essentially, 'The Measurement Department' makes all the efforts to establish 'The Surveying Regulations'. This could possibly apply GNSS-based surveying technique to the cadastral resurvey for the foreseeable future and this research paper suggested that how to improve absolute accuracy of cadastral reference points by means of putting to use the appropriate models of measurement further.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.495-506
• /
• 2021

A Conceptual cost estimate, which is computed in the preliminary step of a project, is important for decision-making by a contractor in terms of the project budget, economic feasibility and validity analysis, and alternative comparisons. Therefore, a high error rate of a prediction model for a conceptual cost estimate can lead to various problems including excessive project expenditures and a delayed break-even point. this study proposed optimal impact factors by configuring quantitative impact factors computable in a preliminary step in various cases(combinations of impact factors). subsequently, the accuracy of different cases was comparatively analyzed by using the cases as input values of a prediction model using regression analysis. when the optimal combination of impact factors proposed in this study and other combination of impact factors were applied to the prediction model, the regression analysis-based prediction model exhibited 0.2-4.7% improvements in accuracy, respectively. the optimal combination of impact factors proposed in this study improved the accuracy of the prediction model of a conceptual cost estimate by removing unnecessary impact factor.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.758-759
• /
• 2007

본 논문은 변압기 이상진단을 위한 유중가스분석법의 진단신뢰도 향상을 위해 기존의 추출율이 높은 토플러 추출방법에 대한 결과와 Headspace 분석법에 의한 결과를 각각 비교하고, Headspace 추출법에 의한 결과의 정확도 향상을 위해 여러가지 인자들을 고려하였다. 향후 최적 조건을 수립하여 수은에 의한 인체 유해성이 없는 Headspace 분석법으로의 전환을 모색하고자 한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.269-272
• /
• 2009

본 논문에서는 변이지도의 정확도 향상을 위하여, 비용 함수를 이용한 교차 일치성 검사 기법을 제안하고, 다양한 조건의 실험을 통하여 제안한 알고리듬이 효율적임을 보였다. 좌우 변이정보를 이용하는 교차 일치성 검사로 오정합을 검출하는 방법을 시도해왔다. 하지만 이러한 방법은 물체의 경계에서 발생하는 오정합을 찾기가 어렵다. 본 논문에서는 최종 변이의 신뢰도 향상을 위해 교차 일치성 검사의 정확도를 높이는 방법을 제안하였다. 일반적으로 영역 기반 스테레오정합 방법은 물체의 경계에서 정확도 높지 못하다. 이러한 문제점을 해결하기 위해 정합창의 크기를 늘리거나 특징 점을 이용한 적응적 가변 정합창을 적용하는 방법을 시도하였다. 하지만, 여전히 기존 교차 일치성 검사를 통한 오정합 검출은 부정확하다. 이러한 영역의 비용 함수 값들을 비교한 결과 첫 번째와 두 번째 값의 차이가 적거나 크게 나타난다. 제안한 방법은 기존 방법에 비해 오정합 검출 능력을 향상 시킨다. 제안한 방법의 결과를 확인하기 위해 스테레오 비전에서 많이 사용되는 영상을 적용하고 분석하였다. 또한, 기존 교차 일치성 검사 방법과 제안한 방법의 객관적으로 비교하기 위해 전체 영역에 대한 오차율 (error ratio)과 교차 일치성 검사로 유효하다고 판단된 변이 값 중 실제 변이 값과 일치하지 않은 변이값의 오차율을 비교하였다. 실험 결과 기존 방법에 비해 제안한 방법이 1~5%정도 낮은 오차율을 보였다

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.4
• /
• pp.219-226
• /
• 2013

Feature selection is the one of important issues in the field of machine learning and pattern recognition. It is the technique to find a subset from the source data and can give the best classification performance. Ie, it is the technique to extract the subset closely related to the purpose of the classification. In this paper, we experimented to select the best feature subset for improving classification accuracy when classify success and failure factors in software reuse. And we compared with existing studies. As a result, we found that a feature subset was selected in this study showed the better classification accuracy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.209-209
• /
• 2018

국토교통부는 대하천에서의 홍수 감시를 위해 전국에 6기의 강우레이더를 도입 완료하였다. 비슬산레이더는 2009년에 맨 먼저 도입된 강우레이더로 국내 최초로 도입된 이중편파 S밴드 레이더이다. 이중편파레이더는 반사도 외에도 차등반사도, 차등위상차, 비차등위상차 등 다양한 레이더 편파변수들을 제공하고 있다. 이중 반사도, 차등반사도, 비차등위상차는 레이더 강수량 추정에 적용되는 편파변수들로 이 변수들에 오차가 내재 시 레이더 강우의 오차에 전파되게 된다. 이에 레이더 강우 추정에 적용되는 편파변수들에 내재되어 있는 오차를 정량화하고 제거하는 것은 레이더 강우 품질에 직결되는 문제이다. 본 연구에서는 2009년부터 2016년까지의 비슬산레이더로부터 관측된 총 351개의 강수사례를 수집하여 레이더 반사도와 차등반사도의 오차를 정량화 하였다. 그리고 이러한 편파변수들의 오차 제거시 레이더 강우량의 정확도가 어느 정도 향상되는 지를 확인하였다. 그 결과 레이더 강우량의 정확도는 편파변수 오차 제거 전에는 40 ~ 80% 범위에서 오차제거 후 60 ~ 80 % 범위로 정확도가 향상되었고 그 범위도 줄어들었다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.80-85
• /
• 2010

BGA 409 chip currently the most as a visual inspection of the exterior inspection is conducted. Human depending on visual inspection of the exterior inspection of the current state of testers, depending on how the test results because the change is difficult to expect reliable results. Therefore, the challenges of visual inspection of BGA solder balls to improve the visual inspection technique was developed. However, BGA solder ball size of the microstructure and the characteristics of the distinction between hard test the accuracy of the fall orientation error has a problem. In this paper BGA solder balls exterior inspection of the accuracy to improve the edge detection algorithm, the complement of features and only the comparison proposed a pattern-matching techniques, based on the characteristics of spatial configuration of the area by improving the standard error of the orientation proposed improvements.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.108-116
• /
• 2008

In this paper, we propose an algorithm that can estimate the distance using disparity based on stereo vision system, even though the obstacle is located in long ranges as well as short ranges. We use sub-pixel interpolation to minimize quantization errors which deteriorate the distance accuracy when calculating the distance with integer disparity, and also we use enhanced adaptive fuzzy strong tracking Kalman filter(EAFSTKF) to improve the distance accuracy and track the path optimally. The proposed method can solve the divergence problem caused by nonlinear dynamics such as various vehicle movements in the conventional Kalman filter(CKF), and also enhance the distance accuracy and reliability. Our simulation results show that the performance of our method improves by about 13.5% compared to other methods in point of root mean square error rate(RMSER).

• Journal of Astronomy and Space Sciences
• /
• v.25 no.3
• /
• pp.291-298
• /
• 2008

With the growth of civil and commercial applications, the Global Navigation Satellite System(GNSS) that provides the positioning, navigation, and timing information affects to our life. In order to meet all the requirements of civilian user, new positioning technology with the accuracy of 10cm level has been applied and the positioning accuracy is getting improved. In this study, dual coverage(DAEJ, SUWN) GPS measurements were applied to improve the positioning accuracy for GPS L1 single frequency users. We processed some GPS data obtained from the distributed test sites in the wide area over Korea Peninsula. As a result, the combined solution output using dual coverage showed more improved positioning accuracy than that of single coverage.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.91-103
• /
• 1998

The digital map data of national basemap which will be basic data of the information age is accomplished to produce and are ready to distribute to public. Generally, the quality of digital map is affected to data history, position accuracy, attribute accuracy, logical consistency and completeness. The quality of digital map Is assured to use basic data for the field of various appication. The purpose of this study is to develop automated qualify control program of digital map through analysis type of errors in digital mapping, to determine method of high quality digital mapping. As a results of this study, The automated quality control program of digital map is developed to assure logical consistency and completeness of digital map which is used to principal data in the field of GIS and is determined the process of high quality digital mapping. Also, the results of this study is contributed to quality assrence and accuracy improvement of national basemap digital mapping database.