• Computational Structural Engineering
• /
• v.12 no.1
• /
• pp.86-94
• /
• 1999

예비구조설계에서는 구조시스템 대안의 생성과 발전, 여러 방법과 대상에 따른 해석과 설계 다양한 요구조건과 구조적 특성을 고려한 여러 구조시스템 대안의 비교 및 선택 과정을 거친다. 그리고, 이러한 각 과정은 구조설계자의 경험적 지식을 바탕으로 하는 종합적인 사고와 판단에 따라서 단계적, 반복적으로 이루어진다. 그러므로, 예비구조설계에서는 정형화된 자료와 작어뿐 아니라 비정형화된 자료와 작업도 처리해야 한다. 따라서, 컴퓨터는 정형화된 자료와 작업을, 구조설계자는 비정형화된 자료와 작업을 직접 처리하고 이를 상호작용을 통하여 교환 및 지시하는 방식, 즉 구조설계자와 컴퓨터의 역할분담에 기초한 상호작용방식을 통하여 예비구조설계에 컴퓨터를 효율적으로 활용할 수 있을 것이다. 구조설계자와 컴퓨터의 역할분담에 기초한 상호작용을 원활히 지원하기 위해서는 구조시스템 대안의 기하학적 향상, 재료에 대한 자료를 효과적으로 제시할 수 있는 3차원 관점, 각 구조시스템 대안을 검토하고 비교하는 사항이 되는 다양한 요구조건에 대한 자료들을 관리하고 제시할수 있는 요구조건 관점이 필요하다. 그리고 예비 구조설계가 진행되어 온 과정, 방향, 설계의도등의 파악을 위한 바탕이 될 수 있는 작업과정관점, 구조시스템 대안 발전 관점이 필요하다. 예비구조설계의 프로세스 조절을 위한 상호작용을 효과적으로 지원하기 위해서는 컴퓨터가 수행 할 수 있는 정형화된 작업들을 예비구조설계의 진행순서인 구조시스템 대안의 생성과 발전, 구조시스템 대안의 해석과 설계, 구조시스템 대안의 선택에 따라서 나열하여 제시할 필요가 있다. 이를 통해서 구조설계자는 자신의 판단에 따라서 다음에 수행해야 할 작업을 결정하고, 그에 해당하는 정형화된 작업을 컴퓨터가 제시한 작업 중에서 선택하고 그 수행을 지시하여 자신의 경험적 지식과 설계의도에 맞추어 예비구조설계의 프로세스를 조절할 수 있다.정조합력은 유의차가 컸으나, 상반조합 능력은 없었다. 교배친의 우성효과는 컸다. 잡종강세 환경변이 및 상가적 작용도 컸다. 우성의 방향은 정의 방향이었으므로 우성귀전자가 크게 작용하였다. 이들 형질들의 귀전자들은 초우성을 나타내었다. 교배친의 자견층중의 우성순서는 잠120>잠114>잠108>잠119>잠118>잠107>잠117>잠113 순이었고, 웅견층중에서는 잠114>잠108>잠120>잠117>잠118>잠107>잠119>잠119>잠113 순이었다. 자견층 비율에서는 광의의 귀전력이 협의의 귀전력보다 컸고, 웅견층 비율에서는 같았다, 견층 비율에서는 일반조합 능력은 크게 나타났으나, 특정조합 능력과 상반조직 능력은 나타나지 않았다. 자견층 비율에서 교배친의 우성효과는 컸다. 자견층 비율에서는 교배친의 우성효과는 적었다. 자웅견층 비율의 잡종 강세는 적게 나타났다. 환경변이와 상가적 작계는 자웅견층 비율에서는 크게 나타났다. 우성의 방향은 자견층 비율에서는 정의 방향으로 우성 귀전자가 크게 작용하였으며, 자견층 비율에서는 정의 방향으로 우성 귀전자가 부분적으로 작용하였다. 교배친의 자견층 비율의 우성순서는 잠117>잠114>잠108>잠120>잠118>잠119>잠107>잠113 순이었고, 자견층 비율에서는 잠114>잠117>잠108>잠118>잠107>잠119>잠113>잠120의 순이었다.지방산의 조성이 많은 차이를 보였다.{2+}$ 26 및 $Na^+$ 26 mg $L^{-1}$이었다. 양액 재배 후 버려지는 폐양액 중의 무기성분 함량은 양액재배에 이용되는 원수에 비해 상당히 높아졌다.료로서 응용 가능성이 있음을 시사한다.약재료인 약초류 등을 이용하였는데 오랫동안 푹 삶아 그물에 곡류 등을 넣어 죽이나 밥으로 조리하였으며 면으로도 조리하였다. 이상과 같이 조선시대 주식류의 종류 및 조리방법에 대한

• Journal of Service Research and Studies
• /
• v.10 no.2
• /
• pp.1-15
• /
• 2020

As big data become more important socially and economically in recent years, many problems have been derived from the indiscriminate application of big data. Big data are valuable because it can figure out the meaning of informative information hidden within the data. In particular, to predict customer behavior patterns and experiences, structured data that were extracted from Customer Relationship Management (CRM) or unstructured data that were extracted from Social Network Service(SNS) can be defined as a population to interpret the data, during which many errors can occur. However, those errors are usually overlooked. In addition to data analysis techniques, some data, which should be considered in the analysis, are not included in the population and thus do not show any meaningful patterns. Therefore, this study presents the measurement and interpretation of the data generated when the cause of error in the population setting is strong relationship and interaction between people or a person and an object. In other words, it will be shown that if the relationship and interaction are strong, it is important to include data collected from the perspective of user experience and ethnography in the population by comparing various cases of big data application, through which the meaning will be derived and the best direction will be suggested.

• Journal of KIISE:Databases
• /
• v.30 no.5
• /
• pp.438-450
• /
• 2003

Spatial joins find pairs of objects that overlap with each other. In spatial joins using indexes, original-space indexes such as the R-tree are widely used. An original-space index is the one that indexes objects as represented in the original space. Since original-space indexes deal with sizes of objects, it is difficult to develop a formal algorithm without relying on heuristics. On the other hand, transform-space indexes, which transform objects in the original space into points in the transform space and index them, deal only with points but no sites. Thus, spatial join algorithms using these indexes are relatively simple and can be formally developed. However, the disadvantage of transform-space join algorithms is that they cannot be applied to original-space indexes such as the R-tree containing original-space objects. In this paper, we present a novel mechanism for achieving the best of these two types of algorithms. Specifically, we propose a new notion of the transform-space view and present the transform-space view join algorithm(TSVJ). A transform-space view is a virtual transform-space index based on an original-space index. It allows us to interpret on-the-fly a pre-built original-space index as a transform-space index without incurring any overhead and without actually modifying the structure of the original-space index or changing object representation. The experimental result shows that, compared to existing spatial join algorithms that use R-trees in the original space, the TSVJ improves the number of disk accesses by up to 43.1% The most important contribution of this paper is to show that we can use original-space indexes, such as the R-tree, in the transform space by interpreting them through the notion of the transform-space view. We believe that this new notion provides a framework for developing various new spatial query processing algorithms in the transform space.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.381-388
• /
• 2010

In this study, characteristics of the seismic response of the non-earthquake resistant reinforced concrete (RC) frame were identified. The test building is designed to withstand only gravity loads and not in compliance with modern seismic codes. Smooth bars were utilized for the reinforcement. Members are provided with minimal amount of stirrups to withstand low levels of shear forces and the core concrete is virtually not confined. Columns are slender and more flexible than beams, and beam-column connections were built without stirrups. Through the modeling of an example RC frame, the feasibility of the fiber elementbased 3D nonlinear analysis method was investigated. Since the torsion is governed by the fundamental mode shape of the structure under dynamic loading, pushover analysis cannot predict torsional response accurately. Hence, dynamic response history analysis is a more appropriate analysis method to estimate the response of an asymmetric building. The latter method was shown to be accurate in representing global responses by the comparison of the analytical and experimental results. Analytical models without rigid links provided a good estimation of reduced stiffness and strength of the test structure due to bond-slip, by forming plastic hinges closer to the column ends. However, the absence of a proper model to represent the bond-slip poased the limitations on the current inelastic analysis schemes for the seismic analysis of buildings especially for those with round steel reinforcements. Thus, development of the appropriate bond-slip model is in need to achieve more accurate analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.231-243
• /
• 2016

This study presents the applicability of two-dimensional (2D) flood inundation model by applying to real irrigation reservoir failure with limited available data. The study area is Sandae Reservoir placed in Gyeongju and downstream area of it and the reservoir was failured by piping in 2013. The breach hydrograph was estimated from one-dimensional (1D) hydrodynamic model and the discharge was employed for upstream boundary of 2D flood inundation model. Topography of study area was generated by integrating digital contour map and satellite data, and Cartesian grids with 3m resolution to consider geometry of building, road and public stadium were used for 2D flood inundation analysis. The model validation was carried out by comparing predictions with field survey data including reservoir breach outflow, flood extent, flood height and arrival time, and identifying rational ranges with allowed error. In addition, the applicability of 2D model is examined using different simulation conditions involving grid size, building and roughness coefficient. This study is expected to contributed to analysis of irrigation reservoirs were at risk of a failure and setting up Emergency Action Plan (EAP) against irrigation reservoir failure.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.5
• /
• pp.5-17
• /
• 2021

In this study, the shear behavior between pile-sandy soil interface was quantified based on series of rigorous ring shear test results. Ring shearing test was carried out to observe the shear behavior prior to failure and behavior at residual state between most commonly used pile materials - steel and concrete - and Jumunjin sand. The test was set to clarify the shear behavior under various confinement conditions and soil densities. The test results were converted in to representative friction angles for various test materials. Additional numerical analysis was executed to validate the accuracy of the test results. Based on the test results and the numerical validation, it was found that due to the dilative and contractive nature of sand, its interface behavior can be categorized in to two different types : soils with higher densities tend to show peak shear stress and moves on to residual state, while on the other hand, soils with lower densities tend to show bilinear load-transfer curves along the interface. However, the relative density and the confining stress was found to affect the friction angle only in the small train range, and converges as it progresses to large deformation. This study established a large deformation analysis method which can successfully simulate and predict the large deformation behavior such as ring shear tests. Moreover, the friction angle derived from the ring shear test result and verified by numerical analysis can be applied to numerical analysis and actual design of various pile foundations.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.473-486
• /
• 1998

A numerically stable technique to remove the limitation in choosing a shift in the subspace iteration method with shift is presented. A major difficulty of the subspace iteration method with shift is that because of singularity problem, a shift close to an eigenvalue can not be used, resulting in slower convergence. This study solves the above singularity problem using side conditions without sacrifice of convergence. The method is always nonsingular even if a shift is an eigenvalue itself. This is one of the significant characteristics of the proposed method. The nonsingularity is proved analytically. The convergence of the proposed method is at least equal to that of the subspace iteration method with shift, and the operation counts of above two methods are almost the same when a large number of eigenpairs are required. To show the effectiveness of the proposed method, two numerical examples are considered.

• International Commerce and Information Review
• /
• v.14 no.3
• /
• pp.481-511
• /
• 2012

Incoterms 2010 Rules consist of 11 rules. The 11 rules are presented in "rules for any mode or modes of transport" and "rules for sea and inland waterway transport". The each rule of Incoterms 2010 rules has the guidance note, 10 articles(A1~A10) in relation to the seller's obligations and 10 articles(B1~B10) in relation to the buyer's obligations. The A6 and B6 of Incoterms 2010 rules, likewise previous Incoterms rules, have the article of allocations of costs. These articles of Incoterms 2010 rules provide the allocation of costs between the seller and the buyer. According to These A6 and B6, in principle, the seller must pay all costs relating to the goods until they have been delivered in accordance with A4, and the buyer must pay all costs relating to the goods from the time they have been delivered as envisaged in A4. The purpose of this paper is, therefore, to analyze the clauses of allocation of costs in Incoterms 2010 and to provide the problems of the clauses.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.335-342
• /
• 2020

Tailless aircraft designed for stealth efficiency uses spoilers instead of rudders for the directional control. When the spoiler is rapidly deployed, highly nonlinear and unsteady aerodynamic characteristics can be generated, resulting in adverse effects on aircraft flight performance. This paper investigates the aerodynamic characteristics of an airfoil with moving spoiler using dynamic mesh CFD technique. The effects of spoiler operation speed, mounting location, and deployment scheduling are analyzed to reduce the adverse effects of the spoiler's dynamic operation. The results shows that the adverse effects of dynamic spoiler can be reduced by appropriate selection of the spoiler mounting location and deployment scheduling.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.173-180
• /
• 2001

This research is aimed at investigating the dynamic response of cut-and-cover tunnel to seismic waves. We carried out shaking table test which is used a 1/40-scale(the width of prototype tunnel is about 14.2m, the height is about 8.5m) model for this research, and we analyzed the effect of depth of tunnel and slope of the ground in relation to the dynamic responses of tunnel. As a result of the test, the stress and acceleration along the tunnel decreased accordingly to the depth of increment, and this phenomenon is caused by the increase of the confining effect of ground. Also, the dynamic responses of tunnel showed a tendency to rise according as ground declined gently. In comparison the result of shaking table test with that of structural analysis on ordinary condition, we conclude that seismic waves do not affect cut-and-cover tunnel when the depth of tunnel is over the diameter of tunnel.