• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.32.1-32.1
• /
• 2011

이 논문에서는 저궤도 지구관측위성 비행모델의 정현파 가진시험 결과에 대하여 분석하였다. 정현파 가진시험은 발사환경시험중의 하나로서, 저주파 대역의 정현파 진동 환경하에서 인공위성의 안정성을 검증하는데 그 목적이 있다. 정현파 가진시험의 입력선도는 발사체로부터 선정되어진다. 발사체로부터 선정된 입력선도는 극한의 경우를 고려한 선도이므로 실제 정현파 가진시험시에는 입력선도에 적절한 노칭을 적용하여야 한다. 노칭은 주구조물의 대한 1차 노칭과 부가 구조물에 대한 2차 노칭으로 구분이 되어 적용되었다. 정현파 가진시험의 전후에는 저수준 정현파가진시험을 수행하였으며, 주파수 응답함수를 비교함으로서 구조적으로 문제가 없는지를 확인하였다. 시험 후, 육안검사를 통하여 구조 부재가 이상이 없는지를 최종 확인하였으며, 인공위성비행모델이 정현파 가진 환경하에서 충분히 안전함을 확인하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.193-196
• /
• 2006

Vibration overtests have been common problems in aerospace industry. A test item can be overtested at its resonances when it is excited by the traditional spectrum enveloping peaks in the field acceleration spectrum. This paper introduces the method of modifying the excitation specification to alleviate the overtesting problem. A vibration analysis was performed to estimate interface forces and acceleration responses. A finite element model that was verified by an extensive modal test enabled us to shape the acceleration input accurately The produced notched input will be used in the sinusoidal vibration test of the small satellite launch vehicle.

• Composites Research
• /
• v.14 no.5
• /
• pp.20-25
• /
• 2001

This paper deals with finite element analysis for free vibration and forced sinusoidal vibration of Ka- and Ku- band antenna structures using MSC/NASTRAN. The structures are designed to satisfy minimum resonance frequency requirement in order to decouple the dynamic interaction of the satellite antenna with the spacecraft bus structure. The large mass method was utilized to analyze output acceleration according to the forced sinusoidal vibration inputs in X-, Y- and Z- directions. The analysis results can also be used thor verification experimental planning of satellite antenna.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.550-551
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.558-559
• /
• 2010

• Journal of the Korean Society for Railway
• /
• v.16 no.4
• /
• pp.246-252
• /
• 2013

The vibration characteristics of railway vehicles are very complex because they are not only dependent on vehicle and track conditions but also on operating conditions. Vibration can cause the failure of rolling stock equipment. To verify that the quality of rolling stock equipment is acceptable, it should be able to withstand vibration tests of reasonable magnitude and duration. There are many standards for vibration and shock tests of equipment in Korea. In this paper, we have reviewed and compared the standards (KS R 9144, R 9146 and IEC 61373) for vibration and shock tests.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.5 s.51
• /
• pp.107-115
• /
• 2006

The power supply system is one of the most important infrafacilities which should maintain their inherent function during and after earthquakes. This study was performed to analyze dynamic characteristics and seismic performance of Korean typical 154kV transformer porcelain bushing. For the purpose of this study, actual 154kV porcelain bushings were selected and tested on the shaking table. The vibration tests consist of modal identification tests, seismic performance tests, and fragility tests. The sine sweep waves, artificial earthquake waves, and continuous resonant sine waves were used as shaking table motions. This paper describes the test specimens, shaking facilities, and test methods. Natural frequencies and damping ratios of the bushing have been evaluated from the experimental data. The failure mode and the performance level of the Korean transformer bushing have been first identified in this study.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.839-840
• /
• 2004

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.119-122
• /
• 2002

The vibration qualification test of satellite antenna is required to verify that there will be no structural damage due to the severe vibration caused by the launch of satellite. For the qualification test, reasonable test load condition needs to be introduced by dynamic analysis. The present work has been performed to provide an understanding how the qualification test load can be evaluated by the results of both normal mode and sine vibration analyses with notching technique for a composite Ka-band antenna structure.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.809-812
• /
• 2005

This paper explains environmental tests of vessel-launched missiles, verifying if a fully assembled missile performs properly from disturbance on delivery by vehicles or naval vessels. We also have operated vibration tests by ground and naval transportation as well as shock tests by naval transportation before firing. The environmental tests have adopted Military Standard Specification and confirmed missile's reliability by performance tests, followed by missile's development. However, this significant testing which have meaning was dong by the missile's body and not with parts.