• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.5
• /
• pp.521-528
• /
• 1992

this paper a new PAM-PWM Inverter using IGBT Is described. The output waveforms in the proposed PAM-PWM inverter are investigated both theoretiically and experimentally. The line-voltage waveform is composed of fundamental component and the sidebands of carrier frequency. The lower order harmonics are not included In the output waveform. As each inverter arm does not operate during two-thirds period, the heats, generated in the devices are reduced. That is the size of the inverter system can be minimized because of the reduction In the heat dissipating equipemnt.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.8
• /
• pp.868-874
• /
• 1990

A singular value approach is presented in order to determine the number of multiple sinusoids from the finite noisy data. Simulations are conducted for Akaike's information criterion (AIC), Rissanen's shortest data description (MDL) and a singular value approach, for various examples with different SNR's and methods of estimating frequencies. And then the performances are compared. Simulation results that the singular value approach is superior to AIC and MDL for FBLP, HOYW and covariance matrix based methods are investigated. The approach with contribute to the frequency estimation of multiple sinusoids from the finite noisy data. Furthermore, this will be applied to the DSPs of communication and bio-medical engineering.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.6
• /
• pp.380-386
• /
• 2000

This paper presents the mathematical modelling analysis of Brushless Synchronous Motor(BLSM). The dynamic and the steady state characteristics of BLSM are simulated and analyzed : electromagnetic torque, speed, line voltage, and current. We used mathematical modelling to model of BLSM with sinusoidal back EMF, namely the shaft transformation referencing rotor frame from a, b, c three to produce constant torque like synchronous motor. The experiment result has already similar to compare with simulation result : torque error about 7%, speed error about 5%. The validity of proposed modelling and analysis was confirmed by the experimental result.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1937-1938
• /
• 2006

최근 들어 안정적인 보행 패턴 생성을 위해서 많은 방법들이 제안 되고 있다. 대부분의 논문에서 주기적인 보행에 대한 연구는 이루어지고 있으나 첫 보행 구간과 마지막 보행 구간에 대한 분석은 이루어지지 않고 있다. 본 논문은 첫 보행 구간과 마지막 보행 구간에 대한 분석을 통해 기존의 역 진자 모델(Inverted pendulum model)을 기반으로 부드러운 무게 중심의 궤적을 생성하는 해석적 방법을 제안한다. 이를 위해 먼저 정현파 함수를 이용해 영 모멘트 위치(ZMP, Zero Moment Point) 궤적을 설계한다. 영 모멘트 위치 궤적 설계 시 첫 보행 구간과 마지막 보행 구간에 대해 영 모멘트 위치와 무게 중심 간의 비 최소 위상(non-minimum phase) 시스템의 특성을 이용한다. 제안된 방법을 이용하여 주기적인 보행 구간 및 첫 보행 구간과 마지막 보행 구간에서 부드러운 무게 중심 궤적이 생성됨을 시뮬레이션을 통해 구현하여 제안된 방법의 유효성을 보인다.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.195-196
• /
• 2012

본 논문에서는 저가형 고효율의 탭인덕터 벅-부스트 마이크로 인버터를 제안한다. 제안하는 인버터는 정상상태 연속모드(CCM)에서 단상전력계통에 고역률의 정현파전류를 공급할 수 있는 새로운 구조이다. 강압시에는 벅모드로 동작하며, 승압시에는 탭인덕터 부스트 모드로 동작한다. 정류형태의 전류를 2차측에 공급하면, 낮은 주파수를 사용하는 전파정류 인버터가 고역률의 교류 파형으로 변환한다. 벅부스트에 탭인덕터를 적용함으로써 권선비에 따른 시비율을 조절할 수 있어 극단적인 승압시에도 벅부스트의 도통을 적절히 유지할 수 있다. 제안하는 인버터는 정상상태 연속모드(CCM)에서 PSIM을 통해 시뮬레이션을 하여 증명하였다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.98-104
• /
• 2001

전자장(EMF)에 의한 생체영향에 관한 연구에 있어서 사람에게 직접 실험하는 것은 윤리적으로나 객관적으로 제한점이 많다. 따라서 생체에 대한 유무해성을 파악하기 위해 in vitro 나 인강과 유사한 동물실험을 통해 그 영향을 조사하고 그 결과를 생체와 연관지어 예측하는 것은 기본 단계이다. 본 연구에서는 세포 및 동물실험을 위한 직류 및 교류(ELF) 자기장 발생장치를 헬름홀츠 코일과 솔레노이드 코일을 이용하여 구성하였으며, 실험시 중요한 자계의 균일도를 각각 비교하였다. 또한 발생자계의 패턴을 DC, 정현파, 구형파, 삼각파, 펄스 형태로 변화 시 킬수 있도록 컨드롤러를 내장시켰다. 발생 자계의 크기는 직류에서 최대 100 Gauss(10mT), 60Hz 정현파에 대해서는 최대 Gauss(2mT)의 출력이 가능하도록 설계하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.4
• /
• pp.336-345
• /
• 1996

The S.O(synchronous osillator) oscillates at its natural frequency without the externa applied signal. But if the external signal is applied, the S.O starts to track the external frequency which can be sinusoidal, pulsed or some other waveform. Thus, the output is synchronized with the wide range of tracking bandwidth to the external frequency. Specifically, the S.O also posses frequency division and multiplication capability. All of these indicate that the S.O can overcome the difficulties of syschronization in coherent digital communication systems. This papers proposed application of DS/SS communication with study on the synchronous properties of S.O.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.338-340
• /
• 2001

Power factor improved for single-phase buck-converter is studied in the paper. To sinusoidal waveform the input current with a near-unity power factor over a wide variety of operating conditions, the output capacitor is operated with voltage reversibility for the supply by arranging the auxiliary diode and power switching device. Then the output voltage is superposed on the input voltage during on time duration of power switching devices in order to minimize the input current distortion caused by the small input voltage when changing the polarity. The tested setup, using two insulated gate bipolar transistors(IGBT) and a microcomputer, is implemented and IGBT are switched with 20[kHz], which is out of the audible band. Moreover, a rigorous state-space analysis is introduced to predict the operation of the rectifier. The simulated results confirm that the input current can be sinusoidal waveform with a near-unity power factor and a satisfactory output voltage regulation can be achieved.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.160-162
• /
• 1993

This paper proposes a new converter for switched reluctance motors using a Boost converter in conjunction with a Buck converter. The proposed converter has a unity power factor(hereafter referred to an UPF) in the ac input regardless of the load variations. Moreover, compared to the conventional converter topologies, the total system efficiency is improved by introducing choppingless voltage control methods in the machine side converter and an energy recovery snubber in the pre-voltage regulation stage, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.127-133
• /
• 2002

The objective of this study is to investigate fatigue life and fatigue crack propagation behavior The experiment of fatigue life for MMC have been carried out for the stress ratio R＝0.1 at 20Hz. Fatigue lift limit of AC4CH alloy is about 70 ㎫ and Fatigue limit of MMC has been increment to 120 ㎫, therefore, fatigue limits of MMC is about 71 % higher than that of AC4CH alloy Crack propagation tests on half-size CT specimen of thickness 12.5mm were conducted by using sinusoidal waveform. The crack length was monitored by compliance method. Test conditions were at 0.1 and 0.05 of load ratio at 10Hz of loading frequency and test load was 2.3kN. The effects of stress ratio on the fatigue crack propagation behavior for MMC was discussed within the Paris law. As the results of this study, Fatigue crack propagation increased with increasing the load ratio.