• Journal of KIISE:Software and Applications
• /
• v.27 no.10
• /
• pp.1054-1061
• /
• 2000

영상 정합은 물리적으로 유사한 영상 내의 영역들을 기하학적으로 일치시키는 처리이며 지형 정보, 영상검색, 원격탐사, 의료영상 등의 많은 영상처리 응용에서 사용된다. 영상 정합에 관한 연구는 주로 회전, 크기, 위치 등의 인자 추출에 소요되는 시간과 정확성에 중점을 두어 왔다. 본 연구에서는 영상의 특징 점들에 대한 일차 고유벡터의 방향 분포를 히스토그램으로 표현하고 이를 비교 분석함으로써 정합하는 방법을 제안한다. 일차 고유벡터를 이용함으로써 특징 묘사의 단순성을 제공하고. 히스토그램을 이용하여 정합 인자를 미리 추정함으로써 정합 인자 추출 시 목적함수의 연산에 소요되는 비용을 현저하게 줄였다. 본 연구의 결과를 평가하기 위해 제안한 방식을 일반 영상과 ICG(IndoCyanine Green)망막 영상에 적용한 결과를 보여주고 목적함수의 연산횟수와 시간 복잡도를 기존의 방법들과 비교하였다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.1-8
• /
• 2000

Point pattern matching schemes for finger print recognition do not guarantee robust matching performance for fingerprint Images of poor quality We present a finger print recognition scheme, where transformation parameters of matched ridge pairs are estimated by Hough transform and the matching hypothesis is verified by a new measure of the matching degree using selective directional information Proposed method may exhibit extremely low FAR(False accept rate) while maintaining low reject rate even for the Images of poor quality because of the robustness to the variation of minutia points.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.1
• /
• pp.37-45
• /
• 2002

This paper proposes new features for recognizing telltale bulb in a cluster. A typical feature employed in model-based pattern recognition is polygonal approximation points of object. But recognition using these dominant points has many mismatching counts in small model such as telltale bulb. To reduce mismatching counts, proposed features are the circle distribution of object pixel and the ratio of distance from center to boundary in object. This Paper also proposes new decision function using three features. In simulation result, we make a comparison mismatching counts between recognition using dominant points and the new recognition algorithm using three features.

• Journal of KIISE:Software and Applications
• /
• v.27 no.12
• /
• pp.1193-1201
• /
• 2000

본 논문에서는 탐색 영역과 특징의 가중치를 동적으로 조절하여 블록 단위의 움직임 벡터를 추출하는 활동적 블록 정합 알고리듬을 제안한다. 본 논문에서 제안하는 알고리듬은 탐색 영역의 중심 위치를 결정하기 위해 시간에 따른 블록의 동작 변화는 작다고 가정한다. 그리고 탐색 영역의 크기는 공간적으로 인접한 블록들의 신뢰도에 따라 조절된다. 또한 본 논문에서 제안하는 알고리듬은 다중 특징을 사용하는 블록 정합 알고리듬으로 블록 정합 시 특징의 기여 정도를 나타내는 가중치를 블록 안에서 각 특징이 가지는 구분력에 따라 자동으로 설정하는 정합 유사 함수를 사용한다. 실험 결과는 본 논문에서 제안한 블록 정합 알고리듬이 기존의 알고리듬 보다 정확하게 움직임 벡터를 추출함을 보여준다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.417-420
• /
• 2002

수중 음향 탐지 시스템에서 빔 형성 기법 및 개별 센서에 대한 정합회로의 설계는 실제 시스템 설계 시 시스템의 성능을 결정하는 중요한 요소이다. 본 논문에서는 이 두 가지 기법을 통합하고 있으면서 일반 사용자들도 쉽게 최적 빔 설계를 통한 가중치를 구하고 또 개별 소자에 대한 센서 임피던스 정합회로를 설계할 수 있도록 해주는 통합 S/W를 구현하였다. 본 프로그램을 이용하여 최적의 가중치를 구하고 그 가중치를 가지는 개별 센서의 정합회로를 일괄적으로 설계할 수 있다. 앞으로도 실제 사용자로부터 의견을 수렴하여 계속 성능을 보완할 예정이며 교육용이나 실제 산업용으로 사용이 가능할 것으로 생각된다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.489-496
• /
• 2019

In this paper, we design and fabricate an ultra small dual crossed dipole antenna operating at 2.4 GHz frequency. In order to miniaturize the size of the antenna so that it can be applied to a mobile device, a cross dipole is disposed on the upper two layers and a reflection plane, a horizontal matching circuit and a ground plane are arranged on each layer. The circuit was connected by a vertical through-hole. The size of the fabricated antenna is $21.61mm{\times}16.88mm{\times}1.27mm$, the measured reflection coefficient is -31.5 dB, and the bandwidth below -10 dB is 112 MHz. In addition, since the gain of the antenna is -4 dBi, it has the omnidirectional radiation characteristic, so it can be applied to various fields as an antenna for mobile devices.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1239-1245
• /
• 2009

Currently, so many approaching methods are being developed to optimize the antenna size. In this paper, We fabricated Inverted-F type antenna attaching lumped components to solve the limitation of antenna size. Through experiments, a basic Inverted-F type antenna was fabricated and satisfied the adequate radiation pattern. After this, we researched the effect of antenna varied by matching circuit consist of chip type resistor, inductor, and capacitor. Using that elements, the antenna was matched at aim frequency. The proposed antenna's size is $7\;{\times}\;24\;mm$ that is very small size against the resonance frequence. Measuring the developed antenna, Its return loss was -18dB. Thus, this antenna can be used for Z-wave systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.12
• /
• pp.967-975
• /
• 2013

In the design of underwater electro acoustic transducer, power factor improvement circuit is more required rather than impedance matching if the driving power amplifier has little inner resistance. Many research results have been focused on the power matching circuit designing for transferring maximum power in the wideband. There are few results in the designing study on the power factor improvement for the wide band underwater electro acoustic transducer. In this paper, we set up a new design method on the power factor improvement for the wide band electro acoustic transducer, and confirm its feasibility by the experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.3
• /
• pp.159-166
• /
• 2018

Herein, a non-Foster matching circuit is designed to improve the impedance matching characteristics of small antennas in the VHF and UHF bands. The proposed non-Foster circuit is designed to operate with negative capacitance in a wide frequency band from 50 MHz to 1,000 MHz for use in various communication bands. To ensure the stability of the non-Foster circuit with conditional stability, the open-circuit stability condition of Linvill was satisfied, and the circuit was fabricated using the FR-4 substrate. The fabricated non-Foster circuit was combined with a small antenna to verify its performance by measuring the return loss and received power in the FM, DMB, and GSM bands. The measured return loss was improved from -6 dB to -30 dB, and the measured received power was improved from 0.5 dBm to 5.2 dBm.

• Journal of KIISE:Software and Applications
• /
• v.33 no.3
• /
• pp.335-343
• /
• 2006

This paper proposes a novel technique of marker-based 2D-3D registration to combine 3D information obtained from preoperative CT images into 2D image obtained from intraoperative x-ray fluoroscopy image. Our method is divided into preoperative and intraoperative procedures. In preoperative procedure, we generate CT-derived DRRs using graphics hardware and detect markers automatically. In intraoperative procedure, we propose a hierarchical two- step registration to reduce a degree of freedom from 6-DOP to 2-DOF which is composed of in-plane registration using principal axis method and out-plane registration using minimal error searching method in spherical coordinate. For experimentation, we use cardiac phantom datasets with confirmation markers and evaluate our method in the aspects of visual inspection, accuracy and processing time. As experimental results, our method keeps accuracy and aligns very fast by reducing real-time computations.