• The Journal of the Acoustical Society of Korea
• /
• v.31 no.7
• /
• pp.480-486
• /
• 2012

In the design of electro acoustic transducer, power factor improvement circuit is more required rather than impedance matching if the driving power amplifier has little inner resistance. Many research results have been focused on the power matching circuit designing for transferring maximum power in the wideband. There are few results in the designing study on the power factor improvement for the wide band electro acoustic transducer. In this paper, we propose a new design method on the power factor improvement for the wide band electro acoustic transducer. The proposed method consists of two steps, the chebyschev matching method and the constrained optimization, respectively.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.102-110
• /
• 2015

In this paper, adaptive matching method using the same features for rigid and deformable object images is proposed. Firstly, we determine whether the two images are matched or not using the geometric verification and generate the matching information. Decision boundary which separates deformable matching-pair from non-matching pair is obtained through statistical analysis of matching information. The experimental result shows that the proposed method lowers the computational complexity and increases the matching accuracy compared to the existing method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1335-1340
• /
• 2003

In this paper, a single balanced diode Mixer for the homodyne FMCW radar to detect distance and velocity of a vehicle target is designed and implemented using a microstrip line and two schottky barrier beam lead diodes. This mixer is optimally designed to have less a conversion loss within the 100 MHz bandwidth with a little LO injection power and a higher LO isolation as soon as possible through the embedded electrical length of microsrtrip line placed between the coupler and diode matching, considering together LO matching condition. The measured results show 6 dB of conversion loss, 23 dB LO/RF isolation and 3 dBm of input 1l dB, respectively.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.3
• /
• pp.76-88
• /
• 1999

본 논문에서는 건물이 포함된 스테레오 영상으로부터 건물을 3차원적으로 복원하기 위한 선소 특징 기반 정합 알고리듬에 대해 다루고 있다. 기존의 선소 특징 기반 정합 알고리듬은 선소 추출 기법의 성능에 많이 의존하고, 좌우 영상에서 추출된 에지 길이와 방향이 서로 차이가 날 경우 오정합이 많이 발생한다. 따라서, 건물의 형태를 올바르게 나타내지 못하는 원인이 된다. 본 논문에서는 이러한 단점을 해결하기 위하여 선소의 중심 및 양 끝점 외에 선소에 방향까지 고려하는 새로운 탐색 영역 설정 방법을 제안하였다. 또한 선소기반 정합에서 정합이 잘 이뤄지지 않는 수평선 정합 문제를 해결하기 위한 새로운 방법을 제안하였다. 한편 편평한 건물 가정 하에서 미정합된 건물 내부의 변이값을 얻기 위해 건물 추출 결과와 정합된 선소들을 이용한 보간법을 사용하였다. 제안한 알고리듬을 스테레오 항공 영상에 적용한 결과, 기존의 Hussien 등이 제안한 알고리듬에 비해 좋은 성능을 보였다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.5
• /
• pp.88-95
• /
• 1999

스테레오 정합에서 가장 중요하고도 어려운 문제는 대응점 추출 문제와 폐색 영역에 대한 처리이다. 특히 폐색 영역의 점들은 대응점이 존재하지 않기 때문에 변이 정보 획득에 많은 어려움이 있다. 이러한 문제에 대한 효과적인 접근을 위해 본 논문에서는 쌍방향 정합 알고리즘을 기반으로 폐색 영역의 정합 정도를 향상 시키는 방법을 제안한다. 즉 좌,우 영상 각각의 기준에 대해 독립적인 변이 정보를 구하고, 이를 바탕으로 정합의 타당성 여부를 검토하여 그 결과를 다음 처리에서 반영하는 상호 보완적인 반복 처리 기법을 적용하였다. 이 과정에서 구해진 폐색 영역에 대한 변이 정보는 스테레오 영상 모델의 기하학적 구조를 적용하여 좌, 우측 기준 정합에 대해 그 좌, 우측 점들의 변이 정보들로 대체함으로써 불연속점들의 무뎌짐(blurring)현상을 개선하였다. 한편, 실험 결과를 보다 객관적으로 비교하기 위해 정합율과 에러율이라는 파라메터를 정의하여 개선된 결과를 보였다.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.321-324
• /
• 2000

본 논문은 전력증폭기 정합회로 설계시 주어진 임피던스를 가지고 Ansoft사의 Ensemble을 이용해 기본적인 정합회로를 설계하였다. MHL21336 , MRF21030 ,MRF21125로 대전력 증폭기를 설계 및 제작하여 측정해본 결과 전체 이득이 52㏈, 대역폭 안에서 이득 평탄도는 ±0.37㏈ 정도, 출력이 PEP 5l㏈m에서 -30㏈c의 결과를 얻었다. Bias 전류에 대한 5㎒ Tone-space IMD 특성곡선을 측정해 본 결과 기지국용 대전력 증폭기로 사용할 수 있음을 보였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.432-437
• /
• 2002

DSPA311(Analog Subscriber Line Board Assembly) is offer the interface of between analog subscriber and TDX-100 exchange system. DSPA311 is belong ASI block, accommodate dial and MFC telephone subscriber of 32 channel, and voice signal designed for interface with TSW, and 2 and 4 wire loop impedance is 600 (ohm). DSPA311 is consist 4 channel daughter beard QSLM-10(Quad Subscriber Line Module-10) and perform BORSCHT and be possible A/U-law select and GAIN value control by data control of DSPA171(Device controller I). In this Paper, We described the function test program for the DSPA311 Board by using the HP3070CT combinational test system, and an unmanned automatic test system.

• Journal of KIISE:Software and Applications
• /
• v.31 no.7
• /
• pp.959-967
• /
• 2004

Jain et al. proposed the hybrid matching method which was combined the minutia-based matching method and the filter-bank based matching method. And, their experimental results proved the hybrid matching method was more effective than each of them. However, this hybrid method cannot utilize each peculiar advantage of two methods. The reason is that it gets the matching score by simply summing up each weighted matching score after executing two methods individually. In this paper, we propose new hybrid matching method. It mixes two matching methods during the feature extraction process. This new hybrid method has lower ERR than the filter-bank based method and higher ERR than the minutia-based method. So, we propose the adaptive hybrid scoring method, which selects the matching score in order to preserve the characteristics of two matching methods. Using this method, we can get lower ERR than the hybrid matcher by Jain et al. Experimental results indicate that the proposed methods can improve the matching performance up to about 1% in ERR.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.269-276
• /
• 2016

This paper presents a 2.65 GHz Doherty power amplifier with internally-matched GaN HEMT. Internal matching circuits were adopted to match its harmonic impedances inside the package. Simultaneously, due to the partially matched fundamental impedance, input and output matching networks become simpler. Bond wires and parasitic elements of transistor package were predicted by EM simulation. For the LTE signal with 6.5 dB PAPR, the implemented Doherty power amplifier shows a power gain of 13.0 dB, a saturated output power of 55.4 dBm, an efficiency of 49.1 %, and ACLR of -26.3 dBc at 2.65 GHz with an operating voltage of 48 V.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.10-17
• /
• 1989

A new design method of lossy matching network for the microwave broadband ampilfier is presented by using seattering parameters instead od modeling of transistor. A lossy matching network is represented as the combination of 2 lossless networks between which lossy serial or parallel immittance is inserted without using specific topology, and so many useful matching cireuits can be realized. Also it is shown that linear transforming relation exists between gain and reflection coefficient of the amplifier, and the transforming equation is derived using scattering parameters. With this equation some constant gain circles can be drawn on reflection coefficient plane to get adequate reflection coefficient and gain. And since the relations between amplifier gain/reflection coefficient and the immittance of passive element are bilinear transformations. constant gain or reflection coefficients circles. Illustrative examples are presented to show the usefulness of proposed method.