• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.65-73
• /
• 2007

Recently, large-scale underground cavern such as underground hydraulic-power plant tend to be constructed very largely, so long-length rock bolt are generally used to support the huge plastic zone. However, problems fur bend-ing shape of the long-length steel bar and the bonding effects of anchoring systems are caused during the construction of the long-length rock bolt. In this study, field pull-out test for long-length rock bolt are carried out to estimate the most efficient anchoring system among the saw-toothed shape, grooved shape and smoothed shape with each 6 shells for 5.0m, 7.5m, 10.0m, 15.0m length. The axial load and axial displacement are measured with each load stage and than test results are analyzed to evaluate the behavior characteristics for each anchoring systems of long-length rock bolt. Also, the improvements of anchoring systems are proposed and discussed in this paper.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.4
• /
• pp.5-11
• /
• 2007

In this study, several pullout tests were carried out under various field conditions to evaluate the pullout force of the end fixed nails. Pullout resistance force, displacement and friction force between the grouting and nail were measured in end fixed nails installed in soft rock, weathered rock and weathered soil. Furthermore, the field test were also carried out under the same condition using the conventional type nails. Based on the test results, it is concluded that the end fixed nails showed larger ultimate resistance force compared with conventional types nails, approximately two times in weathered soil and 1.6 times of weathered rock, respectively. The skin friction is also increased in end fixed type about 1.8~3.0 times. Finally, it is concluded in the base of the force transfer properties that using the end fixed nails could decrease the displacement and show a uniform resistance in entire length of nails.

• Land and Housing Review
• /
• v.2 no.1
• /
• pp.53-60
• /
• 2011

In this study, development tests varying with concrete strength, development length, and the rate of fiber mix ratio are carried out to evaluate the development characteristics of high-strength concrete member with 80MPa, and the applicability of estimated standards of development length in KCI 2007. As a result, it can be expected that minimum development length of KCI 2007 is applicable to high-strength concrete member with 80MPa. Although the mixed fiber(NY+PP) to secure fire resistance performance of high-strength concrete is included up to 0.1%, it does not affect the development characteristics.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.63-71
• /
• 2018

Strands with ultimate strength of 2,400 MPa was developed and applied in the KCI Code and the KS standard. A high-strength prestressed strand to be applied to a structure, a suitable anchorage system should be used together. Recently, a post tension anchorage for 2,400 MPa strands was developed. but there is not much research on performance evaluation. Therefore, in this study, structural analysis of local zone with 9 strands, 15 strands, and 19 strands anchorage were investigated respectively, which are most widely used for post tensioning anchorages with 2,400 MPa strands, according to PTI anchorage zone design method, and Load transfer performance from ETAG013 and/or KCI-PS101 was evaluated. Furthermore, the adequacy of the test was also analyzed by nonlinear numerical analysis. As results, the anchorages with 2,400 MPa strands satisfied the structural performance of the local area and satisfied the load transfer performance condition.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.2
• /
• pp.65-69
• /
• 1990

An experiment was carried out ot determine the effects of seeding rates and seedbed preparations on the establishment and yield of surface-sown pasture species. Establishment of orchardgrass was significantly increased by the lowest seeding rate of 20 kg/ha as compared to 30 and 40 kg/ha, but no differences were found between the seeding rates of ladino clover. Both raking and burning significantly improved the establishment of pasture species in comparison with non-treatment. There was a significant difference between the raking and burning for the establishment of orchardgrass, but no significant difference was found between the two treatments for that of ladino clover. Increasing seeding rate of pasture species did not enhance the yield of surface-sown pasture, but both the raking and non-treatment significantly increased the yield of pasture species. The results suggest that both the raking and burning can improve the establishment but increasing seeding rate over 20 kg/ha and burning may not increase the yield.

• 대학교육
• /
• s.69
• /
• pp.10-23
• /
• 1994

• Journal of the Korean Geotechnical Society
• /
• v.16 no.3
• /
• pp.145-155
• /
• 2000

지반과 구조물을 일체화시키는데 사용하는 앵커는 앵커체와 지반의 마찰력에 의해서 구조물을 지지하는 역할을 하며 앵커의 하중과 변형의 관계를 규명하기 위해서는 앵커의 마찰력 분포의 변화(하중전이)가 중요한 요소가 된다. 하중 재하시 앵커체에 발생하는 하중전이 분포는 앵커의 인발 지지력과 밀접한 관계가 있고 정착장의길이, 지반 조건 등에 따라 분포 양상이 변하기 때문에 하중 정이를 이해하기 위해서는 강선과 그라우트의 하중분포 그리로 앵커 그라우트체와 지반과의 마착력 분포를 알아야 한다. 본 연구는 미국 Texax A&M University의 점성토지반에 계측기가 장착된 10개의 그라운드 앵커를 설치하여 인발시험을 수행하였다. 앵커의 자유장 강선에 작용하는 응력, 그라우트체에 작용하는 응력, 그리고 정착장 강선의 응력을 계측하여 강선과 그라우트의 정착응력 및 그라우트와 지반에서의 마찰력 분포를 구함으로써 강선-그라우트-지반의 복합적인 거동에 따른 각 하중 단계마다의 하중전이를 얻어냈다. 또한 현장시험 결과의 역해석을 통하여 강선과 그라우트 사이의 하중과 변위의 관계와 그라우트와 지반의 하중-변위 관계를 분석하여 그라운드 앵커의 인발 특성을 예측 할 수 있는 수치해석 기법을 모델링하여 제시하였다.

• Journal of the KSME
• /
• v.28 no.4
• /
• pp.387-393
• /
• 1988

본 SP시험법은 사용되는 시편이 미소하다는 장점 때문에 재질의 평가나 더불어 비파괴검사의 일환으로서 이용할 수 있음을 서명해 왔다. 현존하고 있는 거대구조물들의 잔존수명평가가 요 구되는 있는 지금, 정량적인 경년변화측정방법으로서 SP시험법은 높은 가능성을 내포하고 있는 시험법으로 여겨지며, 이 방법을 현장에 정착시키기 위해선 산. 학. 연의 공동연구체제가 필요 하다고 할 수 있다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.339-345
• /
• 1996

배관 및 기기 등의 지지부 정착에 사용되는 확장형 앵커는 여러 종류의 진동하중을 받게 되므로 그러한 하중에 대한 동적저항능력이 시험에 의하여 확인되어야 한다. 확장형 앵커의 동적시험 요건이 ASTM E488에 기술되어 있으나 내진시험 입력, 피로전단시험 입력 등 일부 요건이 구체적으로 명시되어 있지 않아 시험기관에 따라 시험조건이 자의적으로 결정될 수 있다. 따라서, 본고에서는 코드 시험요건이 구체적이지 못한 사항을 조사하여 적정 요구수준을 제시하였다. 또한, 국내에서 수행된 동적시험내용 검토결과, 현행 동적설계방안의 일부보완이 필요함을 확인하였다.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.5-19
• /
• 2018

The characteristics of the skin shear stress distribution for the fixed length of the ground anchor are extremely nonlinear and the engineering mechanisms are complex relatively. So it is difficult to design the anchors simulating the actual behavior by considering various soil conditions and nonlinear behavior. Due to these limits, constant skin shear stress distributions for the whole fixed length of the ground anchor are usually assumed in the design for the sake of convenience. In this study, to assess the pull-out behavior of the tension-type ground anchors, the in-situ pull-out tests in weathered-soil conditions were carried out. Based on the test results, the skin shear behaviors for the fixed length of tension-type ground anchors were established and the multi-linear slip shear model predicting this behavior and an analytical technique applying this model were proposed. From the similarity between the results of the in-situ pull-out tests and those of the analytical technique, the applicability and availability of the multi-linear slip shear model and the proposed analytical technique were verified. The maximum shear stress was developed at the start point of the fixed length acting with the smaller load than the maximum pull-out load but the minimum shear stress was developed at the start point of the fixed length and the maximum shear stress was developed at the point apart from the start point of the fixed length after the maximum pull-out load.