• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.40-42
• /
• 2013

고압인버터가 적용된 설비의 연속운전을 보장하기 위해 사용하는 절체 기능은 고압모터가 정지한 후 상용전원으로 모터를 기동하는 방법으로 기동 시 과전류와 고압모터 정지 시간 등이 문제점으로 나타난다. 이럴 경우, 고압인버터 출력전압을 상용전원과 동기화 한 뒤 절체하는 동기절체 기능을 사용하면 고압모터가 회전 중일 때에 절체할 수 있으므로, 절체 시 과전류를 줄일 수 있으며, 설비의 연속운전을 보장할 수 있다.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.267-271
• /
• 1999

연료를 작동 유체의 내부 또는 외부에서 연소시켜서 발생된 고온 고압의 가스를 터빈에 공급하여 회전력을 발생시키는 원동기를 가스터빈이라 하며, 가스터빈을 이용한 발전기와 달리 기동 및 정지 시간이 대단히 짧고, 부하 변화에 대한 속응성이 뛰어나기 때문에 전력계통 운영상 양수 발전기나 수력 발전기와 더불어 첨두 부하용으로 주로 사용된다. 본 고에서는 전력 계통에 병렬 운전 중인 가스터빈 발전기의 부하가 탈락되어 입력 에너지가 과잉으로 되었을 때, 제어 시스템의 중요한 파라미터인 연료량과 가스터빈 속도 및 배기가스의 온도가 비상 정지 수준에 도달하지 않고 안전하게 운전될 수 있는지의 여부, 즉 안정성을 판별하기 위하여 수행한 모의 시험에 대하여 기술하였다. 또, 부하가 탈락되지 않고 입력되는 연료량이 크게 변동하는 경우, 즉 큰 부하 변동을 모의 시험한 내용에 대하여 기술하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1238-1246
• /
• 1992

We developed a time comparison system using the ranging signal of the geostationary meteorological satellite(GMS). By using the system time comparison between the KRISS(Korea Research Institute of Standards and Science) cesium atomic clock and the GMS ranging signal has been carried out and the results have shown that the precision of time comparison at KRISS is about 10 ns. For the more accurate measurements we calibrated the receiver delay time between KRISS receiver and CRL(Communications Research Laboratory) receiver by using the portable GMS receiver.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.372-375
• /
• 2014

본 논문에서는 위치 데이터 분석의 한 방면으로, 사람의 이동정보인 GPS 데이터에 포함된 시간, 위도, 경도를 이용하여 속도를 구한 뒤, 인간의 속도가 지수 확률 분포를 따른다는 사실을 이용해 파티클 필터(Particle Filter)를 적용하여 얻은 결과로 인간의 이동 상태를 판단하려 했다. 인간의 이동 상태는 정지할 확률값 및 이동할 확률값으로 주어진다. 이동 확률 판단을 위해 파티클 필터를 통해 얻은 확률적 수치들을 이용해 이동 상태가 정지인지 이동인지 판단했다. 그리고 실험을 통해 얻어진 결과들을 지도에 도시하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.353-354
• /
• 2019

게임에서 캐릭터가 점프 하는 중 플레이어가 스킬을 사용하면, 모든 물체가 정지 되는 기능을 구현해야 하는 상황에 놓이게 된다. Unity Engine에 내장 된 중력을 사용하면, 플레이어가 스킬을 사용 할 때 Rigid Body 속성을 사용하여 움직임을 제한할 수 있다. 그러나, 스킬 사용으로 인한 움직임정지를 해제 할 때 물체의 이전 속력이 사라져 움직임이 부자연스럽게 된다. 이를 해결하기 위해 수학 계산을 통해 시간 값에 따른 중력 값을 대입 하는 방법을 사용하면, 속력이 매우 커 타일을 통과해서 지나가는 현상이 나타난다. 본 논문에서는 다음 프레임 위치 계산을 통해 이러한 문제를 보정하는 방법과 수학 계산식을 통해 속력을 계산했을 때의 문제점 보완 방법 등에 대하여 연구하였다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.2
• /
• pp.31-38
• /
• 2010

Environment and climate changes affect all aspects of our society. The enhanced remote sensing technology made the satellite to be widely used in the environment monitoring applications. Geostationary environmental monitoring is also actively researched due to the increased needs for the monitoring of diurnal environmental changes, troposhperic pollution and its origin. In this paper, recent development trends of geostationary environment monitoring payloads are introduced. GEO-CAFE and GIFTS missions are researched by the leading of the NASA and Sentinel-4 by the ESA. Those missions are in the state of detailed conceptual design and hardware development preparing with the launch plan in the late 2010s. By considering these development trends, domestic environment monitoring payloads shall be developed with careful analysis on the mission and data application.

• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.426-431
• /
• 1998

This paper describes electrochemical etch-stop characteristics in THAH/IPA/pyrazine solution. I-V curves of n- and p-type Si in THAH/IPA/pyrazine solution were obtained. OCP(Open Circuit Potential) and PP (Passivation Potential) of p-type Si were -1.2 V and 0.1 V, and of n-type Si were -1.3 V and -0.2 V, respectively. Both n- and p-type Si, etching rates were abruptly decreased at potentials anodic to the PP. The etch-stop characteristics in THAH/IPA/pyrazine solution were observed. Since accurate etching stop occurs at pn junction, Si diaphragms having thickness of epi-layer were fabricated. Etching rate is highest at optimum etching condition, TMAH 25wt.%/IPA 17vol.%/pyrazine 0.1g/100ml. thus the elapsed time of etch-stop was reduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.97-100
• /
• 2007

In order to overcome many defects in the current JPEG standard of still image compression, the new JPEG2000 standard has been development. The JPEG2000 standard is based on the principles of DWT and EBCOT Entropy Coding. EBCOT(Embedded block coding with optimized truncation) is the most important technology in the latest image-coding standard, JPEG2000. However, EBCOT occupies the highest computation time to operate bit-level processing. Therefore, many researches have achieved methods to minimize computation speed of EBCOT. Thus, this paper proposes the method of context-extraction that improves computational architecture. This paper proposes efficient context coding method. The proposed algorithm would apply to hard-wired JPEG2000 Encoder that is used for compression of high resolution image.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.25-40
• /
• 2003

The purpose of this thesis is development of detection algorithm for stop-line detector. Detail detection area is set in basing detection area($1.8{\times}4.0m$) and traffic information(volume, occupancy, nonoccupancy) is collected by passive infrared detector at designing detection area. The basis detection area($1.8{\times}4.0m$) is named existing PIR and detection area applied on development algorithm is named proposal PIR. The proposal PIR is collected data such volume, occupancy, nonoccupancy, speed and lane change, but this thesis is limited to evaluate for volume, occupancy and nonoccupancy The procedure and each step of being developed algorithm is described in the next (1) The detection area of proposal PIR is made up of 2 of $1.8{\times}0.6m$ size(the detection area is named 1 and 3) and 1 of $1.8{\times}1.78m$ size(the detection area is named 2) (2) The image detection area is set on monitor to analyze outdoor photographing data then video frame analysis has been done by analyzer. (3) The occupancy, nonoccupancy and speed data of vehicle have been collected with the detection area 1 and 3 and lane change has been collected with combination of detection area 1, 2 and 3 The MAD and MAPE have been utilized to being compared with volume, occupancy and nonoccupancy for the field application and evaluation of a algorithm As the result, the proposal PIR data have been identified superior to the existing PIR data and the effect has been improved its information(volume, occupancy and nonoccupancy)

• Journal of KIISE
• /
• v.42 no.3
• /
• pp.281-288
• /
• 2015

A volcano disaster damage prediction system supports decision making for counteracting volcanic disasters by simulating meteorological condition and volcanic eruptions. In this system, a program called Fall3D generates predicted results for the diffusion of ash after a volcanic eruption on the basis of meteorological information. The relevant meteorological information is generated by a weather numerical prediction model known as Weather Research & Forecasting (WRF). In order to reduce the entire processing time without modifying these two simulation programs, pipelining can be used by partly executing Fall3D whenever the hourly (partial) results of WRF are generated. To reduce the processing time, successor programs such as Fall3D require that certain features be suspended until the part of the results that is based on prior calculation is generated by a predecessor. Even though Fall3D does not have a suspend or resume feature, pipelining effect can be produced by using the program's restart feature, which resumes simulation from the previous session. In this study, we suggest a workflow that can control the execution type.