• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.199-202
• /
• 2007

본 논문에서는 탄소나노튜브 기반 비휘발성 메모리 소자를 설계하고 분자동력학 방법을 이용하여 이중벽 탄소나노튜브 구성된 소자에 대하여 동작 특성을 분석하였다. 탄소나노튜브는 탄소-탄소 반데르발스 힘과 탄소나노튜브-금속 결합력 간의 균형점에서 국부적으로 안정화 되도록 하는 방법으로, 탄소나노튜브와 양쪽에서 간격을 두고 마주대하는 소스 및 드레인 전위를 조절함으로써 탄소나노튜브에 유도된 정전기인력으로 내부 탄소나노튜브의 움직임을 제어한다. 본 나노메모리 소자는 테라급 재기록 비휘발성 나노메모리(Rewritable Non-Volatile Nano-Memory)로 활용될 수 있으며, 2bit 뿐만 아니라 3bit 정보저장 소자로 활용될 수 있다. 분자동력학 결과는 정보저장 동안에 발생되는 탄소나노튜브와 금속전극 사이의 충돌은 메모리 소자의 동작 속도 및 비휘발성 특성에 매우 중대한 영향을 미치게 될 것을 알 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.134-134
• /
• 2018

반데그라프 발전기는 큰 전위차를 생성하고 입자를 가속시키기 위해 발명된 정전기 발생기이다. 현재 반데그라프 발전기는 사이클로톤의 개발 이후 입자 가속 목적으로 주로 사용되고 있지는 않지만 접촉 전하 생성, 전달, 및 축적을 가능하게 하는 전하 운반 시스템에 기반하여 간단한 구조로 직류를 발생시킬 수 있는 점은 주목할만하다. 특히, 최근 경량성, 고효율 발전 등의 장점으로 에너지 하베스팅 분야에서 많은 관심을 받고 있는 마찰전기 에너지 하베스팅 기술 분야에서는 최근, 높은 에너지 저장 효율을 위해 직류 발생이 가능한 마찰전기 에너지 발전 소자에 대한 연구들이 진행되고 있다. 그러나 전하 운반 시스템을 기반으로 한 마찰 전기 직류 발전기에 대한 연구는 거의 이루어 지지 않았으며, 보고된 몇 연구에서는 저 전류, 고 임피던스 및 저효율과 같은 반데그라프 발전기의 구조적 및 물질적 한계를 극복하지 못했다. 또한 마찰에 의해 발생하는 마모에 의한 출력 감소 또한 해결되지 못한 문제이다. 따라서 뛰어난 마찰전기 특성과 함께 우수한 내마모성을 가지는 폴리머에 기반하여 기존의 한계를 극복 한 전하 운반 시스템 기반 마찰 전기 직류 발전기를 제안한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.603-608
• /
• 2018

Although the voltage-applied discharge method is most widely used in the semiconductor and display industries, periodic management costs are incurred because the method causes defects due to the absorption of ambient fine dust and causes emitter tip contamination due to the discharge. The emitter tip contamination problem is caused by the accumulation of fine particles in ambient air due to the corona discharge of the ionizer. Fuzzy ball generation accelerates the wear of the emitter tip and deteriorates the performance of the ionizer. Although a mechanical cleaning method using a manual brush or an automatic brush is effective for contaminant removal, it requires management of additional mechanical parts by the user. In some cases, contaminants accumulated in the emitter may be transferred to the wafer or product. In order to solve this problem, we developed an ionizer for a clean environment that can remove the pencil-type emitter tip and directly ionize the surrounding gas molecules using the tungsten wire located inside the ion tank. As a result of testing and certification by the Korea Institute of Machinery and Materials, the average concentration was $0.7572particles/ft^3$, the decay time was less than two seconds, and the ion valance was 7.6 V, which is satisfactory.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.820-824
• /
• 2008

Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, the electret filter is made by electrospinning process using Polystyrene which is dissolved by 5 : 5 of Tetrahydrofuran (THF) and Dimethylformamide (DMF). Also the electrical properties and the filtration performances of electrospun filter media are Quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. The surface charge potential and the surface charge density of electrospun PS filters are increased with increasing applied voltage and saturated at 30 kV of applied voltage. Also collection efficiency of electro spun filters is increased with increasing surface charge potential and surface charge density. But the surface charge potential is decreased by natural decay and it causes deterioration of particle collection efficiency.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.1-8
• /
• 1998

Molecular electrostatic potential (MEP) of the thiazole, relevant to the binding of lexitroposin that contains thiazole ring to the base pair of minor groove of DNA is obtained from the results of ab initio calculation. The geometry optimization for the two possible conformations of protonated thiazoles is performed with the aid of MNDO and ab initio calculations. The proton affinities are calculated at the 6-31G and 6-31G basis set for the optimized geometry. The proton affinities are also studied for various substituted thiazoles with the electron-donating and electron-withdrawing groups to estimate substituent effect on the proton affinity of thiazoles. It is found that the thiazole with nitrogen atom aligned inward to the DNA minor groove exhibit higher proton affinity and electron-donating substituents increase the proton affinity of thiazoles.ĀȀꃏ?⨀缾ĀȀ會ĀȀ?⨀ꖓĀĀȀ會ĀȀ僐?⨀聥ꖓĀĀȀ會ĀȀ꣐?⨀聐缾ĀȀ會ĀȀÑ?⨀ၑ缾ĀȀ會ĀȀ壑?⨀ꁑ缾ᨀĀꀏ會Āꀏ냑?⨀⡒缾᐀Āꀏ會Āꀏ࣒?⨀끒缾ᰀĀꀏ會Āꀏ惒?⨀ꁩꖓȀĀꀏ會Āꀏ룒?⨀⡪ꖓሀĀꀏ會Āꀏდ?⨀ᤐ돀삺?⨀塨?⨀飣?⨀돐룣?⨀偠잖⨀샣?⨀줏덐탣?⨀젏ꠏܞ
Ȍ蠀
ᥲ⴯

ͧ
Molecua及컲ࡔ
ȏᰗۊऀں
Molecular electrostatic potential (MEP) of the thiazole, relevant to the binding of lexitroposin that contains thiazole ring to the base pair of minor groove of DNA is obtained from the results of ab initio calculation. The geometry optimization for the two possible conformations of protonated thiazoles

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.178-178
• /
• 2008

ZnO 바리스터는 인가되는 전압에 따라 저항이 변하는 전압 의존형 저항체이며 각종 전기 전자 정보통신용 제품에 정전기(ESD) 대책용 소자로 폭 넓게 사용되는 전자 세라믹스 부품이다. 특별히 Bi-based ZnO 바리스터는 다양한 상(phase)으로 구성되어 있으며 그 입계의 전기적 특성은 소량 첨가되는 dopant의 종류에 따라 다양하게 변하는 것으로 알려져 있다. 본 연구에서는 Bi-based ZnO 바리스터 (ZnO-$Bi_2O_3$, ZnO-$Bi_2O_3-Mn_3O_4$)에서 각종 유전함수$(Z^*,M^*,\varepsilon^*,Y^*,tan{\delta})$를 이용하여 입계의 주파수-온도에 대한 특성을 살펴 보았다. 일반적인 ZnO 바리스터 제조법으로 시편을 제작하여 78K~800K 온도 범위에서 각종 유전함수를 이용하여 복소 평면도(complex plane plot)와 주파수 응답도(frequency explicit plot)의 방법으로 defect level과 입계 특성(활성화 에너지, 정전용량, 저항, 입계 안정성 등)에 대하여 고찰하였다. ZnO-$Bi_2O_3$(ZB)계와 ZnO-$Bi_2O_3-Mn_3O_4$(ZBM)계 모두 상온 이하의 온도에서 $Zn_i$와 $V_o$의 결함이 나타났으며, 이들의 결함 준위는 각 유전함수에 따라 다소 차이가 났다. 입계 특성으로 ZB계는 이상구간(560~660K)을 전후로 1.15 eV $\rightarrow$ 1.49 eV의 활성화 에너지의 변화가 나타났지만, ZBM계는 이러한 현상이 나타나지 않았다. 또한 입계 전위 장벽의 온도 안정성에 대해서는 Cole-Cole model을 적용하여 분포 파라미터 (distribution parameter; $\alpha$)를 구하여 고찰하였다. ZB계의 입계 안정성은 온도에 따라 불안정해 졌지만, ZBM계는 안정하였다.

• Journal of the Korean Chemical Society
• /
• v.51 no.1
• /
• pp.7-13
• /
• 2007

The oxazole plays an important role in the binding of lexitropsin to the guanine-cytosine base pair from minor groove of DNA. The geometry optimization is performed with DFT calculations for the two possible conformations of the protonated oxazole. The proton affinities are calculated at B3LYP level of theory with 6-31G* basis set for the optimized geometry. It is found that the proton affinites of the conformations in which the oxazole nitrogen is the protonation center are greater than that of the conformations in which the oxazole oxygen is the protonation center. This result is in good agreement with molecular electrostatic potential (MEP) contour map. The proton affinities are also studied for various substituted oxazoles with the electron-donating and -withdrawing groups to estimate substitutent effect on the proton affinity at the hydrogen bonding site of the oxazoles. it is shown that the electron-donating substituents increase the proton affinity of oxazole, while the electron-withdrawing substituents decrease it.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2343-2348
• /
• 2014

Main ground net of power plant is formed to protect human body from increase in potential gradient caused by grounding current during ground fault. Calculations during ground design are generally performed according to IEEE Std-80-2000 (Kepco Design Standard 2602). However, it is difficult to apply this Standard to water environment, and a grounding technology is required to secure grounding resistance of floating photovoltaic system. Therefore the aim of this paper is to investigate and analyze ground resistivity on the water surface and underwater of reservoir using Wenner 4-pin method, a general method of measuring ground resistivity. Also, grounding resistance of floating photovoltaic systems currently in operation was measured and analyzed using the voltage drop method suggested in the international standard (IEEE Std-81) to propose a grounding method for stable grounding of floating photovoltaic system. The resistivity at 1m below the surface of water ($126.3969[{\Omega}{\cdot}m]$) is mostly higher than resistivity at the river bed ($97.5713[{\Omega}{\cdot}m]$). Also the proposed grounding anchor method was determined as the most effective method of securing stable grounding resistance in floating photovoltaic systems and is expected to be utilized as a ground method for future floating photovoltaic generation systems.