• The Journal of the Korea Contents Association
• /
• v.16 no.4
• /
• pp.250-261
• /
• 2016

This study was conducted to verify the mediation model of private self-consciousness on game addiction and aggression. Data from 439 boys were included in the analysis. The results are as follows. First, correlation analyses revealed that game addiction was positively correlated with aggression and private self-consciousness. Private self-consciousness was also positively correlated with aggression. Considering two factors of private self-consciousness, game addiction showed a significant positive correlation only with self-reflectiveness factor. Although two factors of private self-consciousness showed positive correlations with game addiction, regression analyses revealed that self-reflectiveness was the significant predictor of aggression. Second, the structural equation analyses showed that private self-consciousness, especially self-reflectiveness was found to partially mediate the influence of game addiction on aggression. Finally, limitations of this study and suggestions for further study were discussed.

• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.417-422
• /
• 1998

The study was explored socket pressure distributions on a trans-femoral amputee with a suction socket in static and dynamic situations. Even when the amputee stood in the anatomically neutral position, significant pressure concentrations were observed in the lateral, medial, and posterior planes of the socket. During free level walking, a significant shifting pattern of pressure concentration areas was observed. High socket pressure was observed in the lateral, medial-anterior and posterior walls during mid-stance or push-off period. Socket pressure measurement will be one of the good tool to determine the optimal socket-limb interface.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2C
• /
• pp.73-80
• /
• 2006

The shear behavior of four different interfaces consisting of four types of geosynthetics was investigated, and both static and dynamic test for the geosynthetic interfaces were conducted. The monotonic shear experiments were performed by using an inclined board apparatus and large direct shear device. The interface shear strength obtained from the inclined board test was compared with calculated values from large direct shear tests. The comparison results indicated that direct shear tests show high possibility to over-predict the shear strength in the low normal stress range where direct shear tests are not performed. Curved failure envelopes were also obtained for interface cases where two static shear tests were conducted. By comparing the friction angles measured from three tests, i.e. direct shear, inclined board, and shaking table test, it was found that the friction angle might be different depending on the test method and normal stresses applied in the research. Therefore, it was concluded that the testing method should be determined carefully by considering the type of loads and the normal stress expected in the field with using the geosynthetic materials installed in the site.

• Progress in Medical Physics
• /
• v.23 no.3
• /
• pp.138-144
• /
• 2012

Dose distribution throughout the clinical organ range of motion was analyzed using a respiratory-motion simulator that was equipped with a polymer gel dosimeter and EBT2 film. The normoxic polymer gel dosimeter was synthesized from gelatin, MAA, HQ, THPC and HPLC. The gel dosimeter and EBT2 film were irradiated with Co-60 gamma rays that were moved along the x-axis and y-axis in ${\pm}1.5cm$ steps at five-second intervals. The field size was $5{\times}5cm^2$. The SSD was 80 cm and set to 10 Gy at a depth of 2 cm. The PDD at a depth of 50 mm was 75.2% in the ion chamber, 82.3% in the static state and 86.1% in the dynamic state in the gel dosimeter. The penumbra for the dynamic state target, which was measured using the gel dosimeter, averaged 10.89 mm, this is a 40.5% increase over the penumbra of the static state target of 7.74 mm. In addition, when measuring with gel dosimetry, the value for the penumbra is 36.6% smaller in the static state and 29.4% smaller in the dynamic state compared to measuring with film. The aim of this study was to investigate the dosimetric properties of a normoxic polymethacrylic acid gel dosimeter in static and dynamic states and to evaluate the potentiality as a relative dosimeter for dynamic therapeutic radiation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1170-1177
• /
• 2012

The purpose of this study was to examine the relations between infant's mothers parenting stress, anger and anger expression patterns: The data for this study was collected from 205 among the 3 to 6 years old infant's mothers who attend to the three kindergartens and seven children's house. The instruments used for this study were a self-report questionnaire, PSI(Parenting Stress Index Short Form by Abidin), Anger and Anger-expression patterns. Regression analysis was the statistical method used for data analysis. Results: There were significant positive correlations in the infant's mothers parenting stress, state-trait anger and anger out/in. The results of multiple regression analysis indicated that infant's mothers parenting stress, state and trait anger were significant variables predicting mother's anger expression patterns. Conclusion: This study suggests that the parental education program are necessary which a infant's mother can express positively about anger and decrease parenting stress.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1067-1074
• /
• 2010

In this study, a loosely coupled fluid-structure interaction (FSI) analysis was conducted for a low-pressure (LP) final-stage rotor blade. Preliminary FSI analyses of a $15^{\circ}$ sweptback wing and a NASA Rotor 37 compressor blade were performed for verifying the boundary conditions. The results were compared with the established literatures for each model. The FSI analysis of the $15^{\circ}$ sweptback wing was carried out under both stable and unstable conditions. The excessive deformation of the wing was observed within 0.05 s under the unstable condition which is higher than the divergence speed of a wing compared with the stable condition. On the basis of the results of a steady-state study, an unsteady state FSI analysis was conducted for a NASA Rotor 37. Different deformations were observed at trailing edge of the blade in the static FSI and dynamic FSI analysis. A 3D FE model of a LP rotor was generated from the span-wise section data. In order to develop a reasonable model, an impact test was performed and compared to the FE model. Using this FE model, the steady-state FSI analysis was performed successfully.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.2
• /
• pp.109-117
• /
• 1998

중트럭통행으로 인한 철근콘크리트 교량바닥판의 열화는 교량구조물을 유지보수하는데 있어서 심각한 문제중 하나이며, 프리캐스트 바닥판을 이용한 교량바닥판의 시공 및 교체 방법이 실용적이며, 효과적인 방법으로 인식되고 있다. 본 연구에서는 프리캐스트 바닥판 사이 연결부에 대한 정적실험을 수행하여 실험부재의 탄성영역 및 극한 상태하에서 프리캐스트 바닥판 사이 교축직각 방향 연결부의 강성 및 강도를 평가하였다. 정적실험결과, 무수측 모르나트를 채움재로 사용한 프리캐스트 바닥판 사이 교축방향 연결부는 교축방향으로 적정량의 프리스트레스를 도입함으로서 일반 현장타설 철근콘크리트 바닥판에 비해서 균열에 대한 사용성이 향상되는 것으로 나타났다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.6
• /
• pp.122-128
• /
• 2015

Recently, as the demand for high efficiency, multi-function machine tools has increased, domestic machine tool industries are investing in research and development for Gantry-Type Machining centers. In this thesis, for the purpose of evaluating machining accuracy and designing a machine tool structure, a simplified model of the main frame is suggested. The results show the general characteristics of the optimum design, and the approach is shown as practicable for the preliminary design analysis and improvement of a conceptual design of a Gantry-Type Machining center. This paper's results are expected to improve the static characteristics of Gantry-Type Machine centers. The three-dimensional finite element models proved that the modeling method might be applied to real machine tool structures.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.485-491
• /
• 1998

이산사건 시스템은 시간의 이산순간에 상태변화가 발생하는 시스템으로서 공정제어, Robotics, 교통시스템, Flexible Manufacturing System, 통신등 많은 분야의 시스템이 이산사건 시스템들이지만 아직도 포괄적이고 융통성 있는 제어이론이 연구되지 않았다. 본 연구는 특히 Real-Time Temporal Logic Framework(RTTL)에서 비결정적으로 발생되어지는 확정적인 사건들로써 유발되어지는 비결정적 이산사건 시스템의 모델링 방법을 제시하였다. 이 방법을 두 개의 machine들로 구성된 Flexible Manufacturing System(FMS)에 적용하여 설명하였다. 이 방법은 복잡한 이산사건 시스템의 모델링을 모듈화하여 간편하게 표현 할 수 있는 우수한 특성을 가지고 있다.

• Journal of Korean Elementary Science Education
• /
• v.40 no.3
• /
• pp.343-365
• /
• 2021

The purpose of this study was to clarify the effect of learner variables on triggering state curiosity and state anxiety in confronting scientific task situation for fifth to sixth grades of elementary school. Science curiosity, interest, need for cognition, science self-concept, science anxiety, prior knowledge, and perceived difficulty were selected as learner variables that are expected to affect state curiosity and state anxiety. As a result of this study, the variables that had a significant influence on evoking state curiosity in confronting scientific task situation were in the order of interest, need for cognition, science curiosity, and prior knowledge, and all of these variables had a positive effect. In addition, the variables that significantly affect on evoking state anxiety in confronting scientific task situation were in the order of science anxiety, perceived difficulty, need for cognition, science self-concept, and prior knowledge. Of these, only prior knowledge had a negative effect on evoking state anxiety, and the other variables had a positive effect. The results of this study are expected to broaden the comprehension of students' emotional states in science education, and provide a theoretical foundation for the studies of state curiosity and state anxiety in science learning.