• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.96-100
• /
• 2001

본 논문에서는 skeleton slot 복사기를 이용하여 GSM 900과 GSM 1800에서 사용할 수 있는 이중대역 안테나를 설계 및 제작하여 측정 결과를 비교 분서하였다. 기본적인 skeleton slot 구조에서는 낮은 밴드의 2배 이상의 주파수에서는 수평 빔폭이 일정치 않고, 정재파비 특성이 불량하였으나, 급전부와 측면 방사부분의 다중경로 형성 및 절곡 구조를 이용하여 이를 해결하였다. 안테나의 크기는 반사판이 190$\times$190(mm), 복사기는 154$\times$106(mm), 높이는 33mm로 하여 현재 서비스 사업자틀이 주로 사용하는 크기로 구성하였다. 구성 재질은 1mm 두께의 알류미늄판을 이용하며, 이를 NCT로 타공 및 절곡하여 제작하였기 때문에 대량 생산 시 단가를 낮출수 있다. 실측결과 900MHz 대역에서 13.7%, 1800MHz 대역에서 16.4%의 -l0dB 반사손실 대역폭을 만족하고, 방사패턴도 대역별로 $\pm$1$^{\circ}$이내의 일정한 양상을 보여 이중대역 안테나로서의 요구를 만족하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.501-509
• /
• 1988

A new type toroidal core transformer for impedance matching for 30MHz~90MHz has been designed and fabricated. It is shown to be reasonably good characteristics that insertind loss was 1.2[dB], VSWR was 1:2.0 and 100[%] bandwidthe was achieved. It is expected that resulting transformer can be used to replace existing frequency selector type matching network because it is much more compact and relatively easy to contruct.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.190-195
• /
• 2003

We developed a loading sleeve for Automobile, which has the PCS and IMT-2000 frequency bands. The electric characteristics of the designed sleeve monopole has SWR<1.311 and 3.0dBi in average gain for that frequency bands. In this study, the designed sleeve monopole was installed at a roof and trunk lid of vehicle. The characteristics of designed sleeve monopole was investigated by measuring SWR, input impedance and radiation pattern. The experimental results show that the efficiency of the sleeve monopole is superior th that of domestic and foreign commercial PCS antenna.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.229-232
• /
• 2010

본 논문에서는 900MHz대역의 대각선 슬롯형 마이크로스트립 패치 안테나를 설계하였다. 제안한 마이크로스트립 패치안테나는 안테나 크기, 절단 길이, 급전위치, 공기층의 높이 등과 같은 중요 파라미터를 고려하여 설계하였다. 설계한 마이크로스트립 패치안테나는 915MHz에서 최소의 반사손실을 가지며, 반사손실을 -16dB 이하에서 정재파비가 1.2이하일 경우, 약 26MHz의 대역폭을 확보함을 알 수 있다. 또한, 설계한 대각선 슬롯형 마이크로스트립 패치 안테나는 915MHz 중심주파수 대역에서 이득이 6dB이고, 축비가 2.8dB 되어 우수한 특성을 갖는다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.73-74
• /
• 2016

In this paper, a design method for a wideband square loop antenna for Digital TV applications is studied. The proposed loop antenna is a square loop antenna combined with circular sectors to connect with central feed points. The input reflection coefficient and gain characteristics of the proposed antenna are analyzed to match with the 75 ohm input impedance for DTV applications. The optimized antenna is designed on FR4 substrate, and it operates in the frequency band of 470-1,300 MHz for a VSWR < 2, which assures the operation in the DTV band(470-806 MHz).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.51-57
• /
• 1990

In this paper, We design the microwave integrated circuits for a broadband amplifier using elliptic filters and auxilliary networks at input and output. The input and output equivalent circuits of GaAs MESFET modeled unilaterally are adapted for analysis of this amplifier. The experimental results of this amplifier on 4~8GHz frequency range show that its gain, VSWR and noise figure are 10.5dB, 2.1:1 max. and 2.5dB max., repectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.282-288
• /
• 2014

Recently there have been much interest in the GPS antenna performance improvement. In this paper, we propose very small patch antenna for GPS band. The proposed antenna resonance frequency was adjusted using the ground plane and variable capacitor connected the frame. The fabricated antenna was used a FR4 substrate by considering the difficulty and economical efficiency. Antenna measurement results was obtained good characteristics of VSWR 1.2, the passive antenna gain -0.60 dBi, the active antenna gain of 29 dB in center frequency of 1575.42 MHz GPS band.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.5
• /
• pp.8-14
• /
• 1980

Many of the modern radar antennas operated in the X-band frequencies are made of the slotted waveguides. Varying the distances between the slots and the skew angles of the each slot, we can synthesize a very sharp fan-beam as well as maintaining low standing wave ratio. This paper deals with the design data of the above antennas. We made a slotted array antenna with the data and measured the antenna parameters. And these were compared with the calculated values.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.902-905
• /
• 2006

This paper presents a new RF testing scheme based on a design-for-testability (DFT) method for measuring functional specifications of RF integrated circuits (IC). The proposed method provides input impedance. gain, noise figure. input voltage standing wave ratio (VSWR) and output signal-to-noise ratio (SNR) of a low noise amplifier (LNA). The RF test scheme is based on theoretical expressions that produce the actual RF device specifications by output DC voltages from the DR chip.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.50-56
• /
• 2014

In this paper, we proposed a Ku-band antenna that can be mounted on UAV. A proposed antenna structure has small size and light weight. It is considered long distance communication environment(LOS) and equipped UAV. Proposed antenna is designed $16{\times}2$ aperture coupled microstrip patch array antenna for high gain characteristics. In the measurement results, VSWR is less than 1.5 and the gain is over 21dBi in the bandwidth. Mechanical specifications of antenna assembly are ${\phi}250{\times}200mm$ of size and 3kg of weight.