• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.2
• /
• pp.63-67
• /
• 2011

We investigated effects of bonding conditions on the peel strength of rigid printed circuit board (RPCB)/ flexible printed circuit board (FPCB) joints bonded using a thermo-compression bond method, The electrodes on the FPCB were coated with Sn by a dipping process. We confirmed that the bonding temperature and bonding time strongly affected the bonding configuration and strength of the joints. Also, the peel strength is affected by dipping conditions; the optimum dipping condition was found to be temperature of $270^{\circ}C$ and time of 1s. The bonding strength linearly increased with increasing bonding temperature and time until $280^{\circ}C$ and 10s. The fracture energy calculated from the F-x (Forcedisplacement) curve during a peel test was the highest at bonding temperature of $280^{\circ}C$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.6
• /
• pp.789-805
• /
• 1998

The purpose of this study was to compare the microleakage of the IPS Empress ceramic crown according to 1) margin types such as rounded shoulder and bevel, 2) margin locations such as enamel and dentine, 3) resin cement types such as Variolink and Bistite. For this study, 80 extracted premolar teeth were used. After 10 experimental dies were prepared for each group, the IPS Empress ceramic crowns were fabricated on the dies and cemented with one of two types of resin cement. After 1,000 cycles of thermal changes were given with the thermocycling unit, each specimen was sectioned with a low speed diamond saw in both the buccolingual and the mesiodistal direction. The microleakage was then measured with a stereo microscope. The obtained results were as follows : 1. Every experimental group showed microleakage. The microleakage of the crowns which had a rounded shoulder on enamel cemented with Variolink was the lowest of all. The resulting rank of the mean microleakage was rounded shoulder on enamel using Variolink(0.601mm), rounded shoulder on enamel using Bistite (0.794mm), bevel on enamel using Variolink (0.826mm), rounded shoulder on dentine using Variolink(1.054mm), bevel on enamel using Bistite(1.087mm), rounded shoulder on dentine using Bistite(1.176mm), bevel on dentine using Variolink(1.258mm), and bevel on dentine using Bistite(1.467mm). 2. The statistically significant differences in the microleakage were found in 4 cases: rounded shoulder on enamel using Variolink and bevel on dentine using Variolink, rounded shoulder on enamel using Variolink and bevel on dentine using Bistite, rounded shoulder on enamel using Bistite and bevel on dentine using Bistite, bevel on enamel using Variolink and bevel on dentine using Bistite. 3. The microleakage of rounded shoulder finish line was lower than that of bevel finish line. The statistically significant differences were found with respect to the type of finish lines. 4. The microleakage of the finish line on enamel was lower than that of finish line on dentine. The statistically significant differences were found with respect to the location of the finish lines. 5. The microleakage of the Variolink cement was lower than that of the Bistite cement. The statistically significant differences were found with respect to the resin cements.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.159-169
• /
• 2016

Objectives: The objective of this study was to evaluate the generating characteristics of VOCs and the exposure effect to chemicals among laundry workers and to identify the current status of occupational safety and health through health check-ups. Methods: During the six-month period from April to September 2015, this study quantitatively measured seven VOCs in ten laundries and carried out health examinations on 35 workers. Results: Comparing the monitoring results for the ten laundries, they were classified into three groups by ventilation system, dry-cleaning and size of shop. The average concentration of toluene, chlorobenzene, xylene, ethylbenzene, benzene, styrene and TCE were 23.9, 15.6, 5.5, 2.8, 0.9, 0.3 and $1.3{\mu}g/m^3$, respectively. During dry-cleaning, VOC concentrations were 1.3-8.9 times higher than usual. On the other hand, at night the concentrations of toluene, chlorobenzene, xylene, ethylbenzene, benzene, styrene and TCE were 64.3, 41.5, 12.2, 6.3, 1.1, 1.2 and $6.6{\mu}g/m^3$, respectively. The health checkup results for the 35 workers showed that 13 workers were diagnosed as normal, while 22 workers were diagnosed as requiring continuous monitoring or re-checkup of liver and hematogenous functions. Conclusions: Although the results of exposure evaluation to VOCs did not exceed reference value and items had a low correlation with health checkup items, it is necessary to improve indoor air quality due to VOC volatilization from clothes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.373-377
• /
• 2000

This study Investigated the effects of $estradiol-l7{\beta} (E_2)$, $17{\alpha}-methyltestosterone$ (MT) and high temperature (WT) on gonadal sex differentiation in black rockfish, Sebastes srhlegeli. fish were reared to oral adminstration of E, at nominal concentrations of $20, 40 and 60 {\mu}g/g diet$, and MT at nominal concentration of 20 and $50 {\mu}g/g$ diet from 56 days to 77 days after parturition. In the treatment of WT, water temperature of the breeding tanks ranged $27.0{\pm}0.5^{\circ}C$ more than $10^{\circ}C$ approximately, in comparison to the control and other experimental group, In the process of sex differentiation until 56 days after parturition, gonads were composed of mostly gonia cells, sexually undifferentiated. In contrast, 128 dal's after parturition, the ovaries were composed of ovarian cavity and lamellae, and oogonia and perinucleolus oocytes were distributed in the lamellae of ovary, and the testes were composed of a number of seminiferous tubule, and spermatogonia were distributed in the seminiferous tubule, and also melanophore scattered in the matrix layer of testis. In the sex ratio, more females than male were observed from $E_2$. treatment groups when compared to the control, but more males than females were observed from MT and WT treatment groups when compared to the control. In the results of the present study, the concentration and kinds of the sex steroid hormones, and also the rearing high temperature caused to the factor of sex determination in the process of sex differentiation of black rockfish.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.661-669
• /
• 2000

This research was carried out to evaluate effect of metallic release and change of water corrosive indices by the pH and alkalinity adjustment using the SDLS (Simulated Distribution Loop System) which consist of six types of pipe loop with DCIP, PVC, PE, STS304, CP, GSP, respectively, and its effects on water quality changes which were microbes quality(SPC), residual chlorine. THMs and other parameters. And it was to propose optimal criteria of water quality control for the field application. According to the results, water control system by pH and alkalinity adjustment showed the changing of corrosive water and reducing of metallic release rate and it was not affects of THMs formation, microbes regrowth and variation of other parameters. Water quality stability and corrosion control were due to calcium carbonate precipitation film formation of pipe inner by water quality control. Therefore, corrosive water control system by pH and alkalinity adjustment can be attributed to effective water quality management in water distribution system according to water quality stability of pH and TIC(Total Inorganic Carbonate concentration) that affect the precipitation and dissolution of solids.

• Korean Journal of Ichthyology
• /
• v.20 no.4
• /
• pp.255-262
• /
• 2008

The endemic Korean stumpy bullhead Pseudobagrus brevicorpus is a first-grade endangered wild fish as designated by the Ministry of Environment of Korea. As part of its restoration and proliferation effort, a histological study of this fish was carried out to investigate sex differentiation and gonadal development based on F1 generation individuals obtained by artificial breeding. On days 4~5 after hatching, a pair of genital ridges including clusters of primordial germ cells was observed between the gut and the mesonephric duct. On days 20 after hatching, the ovary began to initially differentiate and contained early oocytes with chromatin-nucleolus and peri-nucleolus stages on days 30~40 after hatching. As yolk material accumulated after day 80 from hatching, the oocytes grew increasingly large and were surrounded by a distinct follicular layer. On days 306 after hatching, the oocytes grew toward a mature ovum. In the males, the testis was distinguished by emergence of spermatogonium cells on 25 days after hatching, and day 40 after hatching it contained a small number of seminal lobes forming cysts. From 173 days after hatching, the testis consisted of numerous enlarged seminal lobes including spermatocytes and spermatids. Over 14 months after hatching, some seminal lumens were filled with spermatozoa.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.123-129
• /
• 2012

Recently, interests on cleaning robots workable in pipes (termed as in-pipe cleaning robot) are increasing because Garbage Automatic Collection Facilities (i.e, GACF) are widely being installed in Seoul metropolitan area of Korea. So far research on in-pipe robot has been focused on inspection rather than cleaning. In GACF, when garbage is moving, the impurities which are stuck to the inner face of the pipe are removed (diameter: 300 mm or 400 mm). Thus, in this paper, by using TRIZ (Inventive Theory of Problem Solving in Russian abbreviation), an in-pipe cleaning robot of GACF with the 6-link sliding mechanism will be proposed, which can be adjusted to fit into the inner face of pipe using pneumatic pressure(not spring). The proposed in-pipe cleaning robot for GACF can have forward/backward movement itself as well as rotation of brush in cleaning. The robot body should have the limited size suitable for the smaller pipe with diameter of 300 mm. In addition, for the pipe with diameter of 400 mm, the links of robot should stretch to fit into the diameter of the pipe by using the sliding mechanism. Based on the conceptual design using TRIZ, we will set up the initial design of the robot in collaboration with a field engineer of Robot Valley, Inc. in Korea. For the optimal design of in-pipe cleaning robot, the maximum impulsive force of collision between the robot and the inner face of pipe is simulated by using RecurDyn(R) when the link of sliding mechanism is stretched to fit into the 400 mm diameter of the pipe. The stresses exerted on the 6 links of sliding mechanism by the maximum impulsive force will be simulated by using ANSYS$^{(R)}$ Workbench based on the Design Of Experiment(in short DOE). Finally the optimal dimensions including thicknesses of 4 links will be decided in order to have the best safety factor as 2 in this paper as well as having the minimum mass of 4 links. It will be verified that the optimal design of 4 links has the best safety factor close to 2 as well as having the minimum mass of 4 links, compared with the initial design performed by the expert of Robot Valley, Inc. In addition, the prototype of in-pipe cleaning robot will be stated with further research.

• Journal of Acupuncture Research
• /
• v.25 no.5
• /
• pp.17-25
• /
• 2008

Objectives : The authors performed this study to further understand Saam acupuncture treatment in an aspect of the use of two patterns i.e. fixed- and transformed-pattern. Methods : The authors did documentary survey based on Do Hae Kyo Kam Sa Am Do In Chim Beop. 1. We investigated the frequency of the use of fixed- and transformed-pattern as well as the examples of use. 2. We surveyed related literatures and classified transformed-pattern. We did study on the principles of prescriptions of fixed- and transformed-pattern and researched the utilization. Results and Conclusions : 1. Fixed-pattern occupys 35.3% and transformed-pattern takes much more part. 2. Fixed-pattern is based on Nangyoung 69nan, and has the prescription of two enhancement and two inhibition by adaptation of Sangsaengsanggeuk(相生相剋) into self meridian and other meridian, and suggests the importance of the order of needling. 3. There are main points and assistant points in tonifying and suppressing of Fixed-pattern, accordingly, it has a system like Gunshinjwasa(君臣佐使). 4. Transformed-pattern is classified into following 3 types: first, the use of Nangyoung 75nan; second, the substitution of Junghuyl(井穴) with Hyunghyul(滎穴) or Haphyul(合穴) according to Nangyoung 73nan; third, the substitution of the same Osuhyul(五輸穴) in other meridians.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.59-69
• /
• 2017

Objectives: The objective of this study is to evaluate the exposure of VOCs and effects of the chemicals on the nail technicians whose works in a nail shop. Methods: For four month from May to August in 2016, we measured twenty-two kinds of VOCs in ten nail shops and carried out health examinations on thirty-four workers in there. Results: The TVOC concentration in indoor air of nail shops is $0.487mg/m^3$ at a minimum and $33.236mg/m^3$ at a maximum where it consists of 70.5% of Ketones, 25.4% of Alcohols, 2.6% of Esters, 0.8% of Aldehydes and 0.7% of Aromatics. The VOCs concentration during nail art works shows an increase in average ratio 1.8 compared to the concentration of indoor air quality and also the concentration of Isopropanol rose with 3.2 of the highest ratio. The results of Spearman correlation between TVOC concentration in indoor air and environmental factor was like that has significance level of correlation(${\rho}$<0.05, r=0.682) in case of number of customers per day, but the other factors were not meaningful in correlation. Correlation between VOCs and medical check-up items was like that has positive significance level(${\rho}$<0.01, r=0.638) between isopropanol and GPT, but the others have not meaningful. The exposure level of VOCs was not exceed the criteria exposure level 1 of working environment measuring method which announced by labor ministry in all ten nail shop indoor air quality. Conclusions: In this study although it was not significant correlation between harmful substances and medical check-up items in the nail shop indoor air quality, it is necessary to do more ventilation and to install exhaust facilities because of existing high VOCs concentration in the nail shop indoor air.

• The Korean Journal of Archival Studies
• /
• no.57
• /
• pp.113-136
• /
• 2018

Records management refers to a series of activities to achieve the goal of securing transparency in administration and safely preserving and utilizing records. Each process of record management is largely divided into production, preservation and management stage. The reporting system of record production has an important fuction that serves as a bridge between production stage and preservation and management stage. It was established after the enactment of the Act on Records Management of Public Agencies in 1999, to grasp the state of production and management of records of various organizations. Since then the National Archives of Korea(NAK) has been able to rather actively understand the situation of records and acquire them than simply collect them. The Act, which was revised in 2006, regulates electronically automated reporting methods in which the production reporting datas are generated in the record creation system and transferred to the record management system. Despite improvements in the system, electronic reporting methods are being used in part. The 713 public institutions have submitted reports of record production to the NAK in 2017, and this study analyses them of only 47 central administrative agencies, including departments, offices, agencies, and committees. Their reports have 15 forms which consist of production statistics and inventories of 7 types of records including general records, survey, research, review, minutes, shorthand, audiovisual records, secret records, government publications. This suggests implications for improving the reporting system of record production.