• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.1
• /
• pp.97-124
• /
• 1976

To find out the most effective method of treatments for the induction of sprouting of dormant seed potato pieces for the fall crop production of Irish cobbler, this experiment was carried out with sprout inducing bed and field performance trial. In GA treatments, about 10 days were required to sprout and resulted uniform and thin 3-4 sprouts per tuber piece, but sprouts were slender and rooting was not observed. In Ethrel treatments, 20-25 days were required, and sprouts were inferior than that of GA treatment in uniformity of sprouting, and percentage of rotten pieces and of healthy sprouted tuber pieces, but number of sprouts per tuber pieces was low, being 1-2, and sprouts were short, thick, and healthy, and showed good rooting. In GA and Ethrel mixture treatments, 1-2 more days were required to sprout than GA treatments, but sprouts were relatively healthy, and other sprouting pattern were like that of GA treatments. In Ethylene chlorohydrin and 6-Benzyl-adenine treatments, sprouting was like that of Ethrel treatments, but much more days were required than Ethrel treatments and tendency of severe rotting was observed. Optimum treating methods of promising chemicals found to be 1-2 and 2-5 ppm GA solution, 500 and 1000-2000 ppm Ethrel solution, and 1-2＋250-500 and 5＋250-500 ppm GA and Ethrel mixture solution for 60 min. treatment of tuber piece and whole-tuber, respectively. Induction of sprouting in dry and hot time resulted severer rotting of tuber pieces during the induction of sprouting and with the advancement of dormancy, being delayed in date of treatment, tendency of promotion of sprouting and rooting was observed. When sprouted tuber piece was transplanted at the same date, yields were in order of Ethrel, GA and Ethrel mixture, and GA treatment, indicating the correlation between yield and healthiness of sprout and rooting status of sprouted tuber piece. In all treatments, earlier transplanting resulted higher yields.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.543-547
• /
• 1995

This study was conducted to light intensity and night interruption on leaf production in perilla. Using two cultivars ; og-dong and Yeup-sil. The present studies were conducted to investigate effect of the light intensity and night interruption for prolongation of vegetative growth by flowering inhibition in the National Honam Crop Experiment Station, R. D. A, Iri, Korea. The results are summarized as followes, varietal differences of days to flower initiation were not significant by the light intensity and night interruption, however differences of days to flower initiation light intensity or night interruption treatment were higly significant. Flowering of perilla was prolongated in high light intensity and in long night interruption. Between the factors treated flowering of perilla was more influenced by light intensity than night interruption. Days to flower initiation of perilla were light intensity(0.5∼1 Lux) in 30 mins night interruption, however 3∼10 light intensity in 60 mins night interruption and 30∼100 Lux light intensity in 10, 30, 60 mins night interruption treatment were not flowering. Plant height, leaf area and dry weight of perilla were the highest in 30∼100 Lux light intensity treatment than in the other treatments. The results would be avaliable establish year-round production methods for low cost of perilla leaf.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.68-68
• /
• 2020

최근 농촌진흥청과 기상청에서 발표한 연구자료에 따르면 2020년 기준으로 국내 경지면적의 10% 가량이 이미 아열대 기후대에 속하고 있을 뿐 현재 추세대로 온실가스가 배출될 경우 2100년경 우리나라의 대부분 지역은 아열대 기후대에 속하게 될 것으로 전망되고 있다. 이에 국가 기관뿐만 아니라 많은 지자체에서 기후변화에 대응하여 아열대 작물을 도입하기 위한 시도를 활발하게 추진하고 있다. 아열대 작물 중 국내에서 3번째로 많이 활용되고 있는 삼채는 기능성 물질을 다량으로 함유하고 있어 수요도가 지속적으로 증가하고 있다. 하지만, 삼채의 경우 일반적인 원예 작물과는 달리 실생 종자를 상업적으로 이용하고 있어 종자들의 발아율이 균일하지 못할 뿐만 아니라 발아율이 낮은 문제가 있는 것으로 보고되고 있다. 이에 삼채의 경우 농가에서 정식 시기를 맞추기 어려울 뿐만 아니라 대규모 생산을 위한 공정육묘 시스템의 적용이 어려운 상황에 있다. 종자 프라이밍 기술은 잠재적으로 종자 발아와 식물 생장을 빠르고 균일하게 해줄 수 있는 방법으로 알려져 있지만, 현재 삼채에서는 프라이밍 처리가 종자 발아에 미치는 영향에 대해서 검토한 사례가 없다. 따라서 본 연구는 삼채의 파종 효율을 증진시키기 위한 목적으로 몇 가지 프라이밍 처리 방법이 삼채의 발아특성에 미치는 영향을 검정하고자 하였다. 삼채 종자는 (주)아람종묘사의 종자를 구매하여 강릉원주대학교 생명과학대학에서 수행하였다. 프라이밍 처리는 Hydropriming은 증류수, Osmopriming은 CaCl2 1.0%, Halopriming은 Polyrthylene glycol 6000(PEG) 13.5%의 3가지를 사용하였으며, 각 프라이밍 처리 시간은 6시간, 12시간, 18시간, 24시간, 48시간 총 5가지 방법으로 처리되어 대조구를 포함 총 16개의 처리를 하였다. 프라이밍 처리 된 종자는 페트리디쉬 (50mm)에 30립씩 치상하였다. 프라이밍 각 처리구별 4반복으로 하였으며 24시간 암(Black), 온도 20℃의 조직배양실에서 치상 후 10일간 조사하였다. 본 실험 결과 대조구는 38% 발아율을 가졌으며, 프라이밍 처리 시간에 따른 각 처리구들은 대조구에 비해 발아율이 높아짐을 확인할 수 있었다. 그 중 Hydropriming 12시간 발아율 51%, Osmopriming 18시간 발아율 68%, Halopriming 48시간 발아율 65%로 각 프라이밍 처리구별 가장 좋은 발아율을 확인할 수 있었다. 결론적으로 삼채에서 프라이밍 처리 기술의 적용은 발아율의 향상과 발아기간의 정형화를 유도할 수 있어 농가에서의 일반 육묘는 물론이고 대규모 공정육묘를 위한 저렴하고 안전한 방법 중 하나로써 이용될 수 있을 것으로 기대되어 진다.

• Journal of Bio-Environment Control
• /
• v.19 no.1
• /
• pp.55-62
• /
• 2010

This study was conducted to find out the effect of diniconazole treatment by seed soaking on the stretching of tomato and cucumber seedlings. The emergence rate of tomato and cucumber seed was decreased as diniconazole concentration was higher and soaking period was longer. The emergence rate of tomato seedlings was lower as the soaking period was longer in $1mg{\cdot}L^{-1}$ concentration treatments, although there was no significant difference. The other concentration treatment (10, 50, and $100mg{\cdot}L^{-1}$) reduced emergence rate of tomato seedlings outstandingly in higher concentration and longer treated period, but 90% of treated seeds emerged at 10 days after sowing. As the concentration of diniconazol was higher and soaking period was longer, plant height and growth rate of seedlings were retarded. There covery of internodes growth was faster in lower concentration and shorter soaking period. The top and root fresh weight and dry weight of tomato and cucumber seedlings was not influenced by $1mg{\cdot}L^{-1}$ concentration, but these growth characteristics were reduced in higher concentration and longer soaking period. The dwarfed cucumber seedlings treated by diniconazol showed normal growth rate after planting and their male and female flower was set normally. These results suggest that the proper concentration and soaking period of diniconazol may be $10mg{\cdot}L^{-1}$ concentration for 12 hours in tomato seed, and $1mg{\cdot}L^{-1}$ concentration for 24 hours in cucumber seed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.91-97
• /
• 1970

It is one of the important subjects in fall crop production of potatoes in korea to find the proper direct planting method as a substitute for transplanting method by sprouting inducement at seed-bed. From this point the author has undertaken this experiments to examine the effects of several handling methods of seed tuber pieces at planting on sprouting of fall grown potatoes at Ansung Agricultural College from August to september in 1969. The results of experiments induced sprouting with Gibberellin treatment using the variety Irish Cobbler were as follows; 1. Sun light exposure treatment to cut surface of potato seed pieces resulted in rotting of seed pieces and delay of sprouting and bud growth. Exposure more than three hours induced severe rotting(more than fifty percent) of seed pieces (Table I). 2. When soil moisture are abundant and the duration of sun light. exposure is short, even direct planting method of treated seed pieces with Gibberellin resulted in good potato stands (Table 2). 3. The direct planting method, as the rotting of seed pieces are avoidable are applicable in fall crop production of potatoes us a substitute for transplanting method because the sprouting and bud growth are promoted more in case of direct planting than transplanting (Table 3). 4. When the humidity in the bottle was low no healing effects was found by holding the seed pieces in large closed bottle under the trees for three days before planting (Table 2). 5. If duration of sunlight exposure is short, no difference of potato stands between clear day planting and cloudy day plant ing (Table 3). 6. As long as soil moisture deficiency. was not induced the irrigation at planting shows no effects to protect the seed piece rotting after planting (Table 3).

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.3
• /
• pp.55-58
• /
• 2007

Titanum and its alloys have been used as the important materials of eyewear frame due to its light weight, mechanical strength and corrosion resistance. This study investigates hardness and microstructures of titanum alloy groove wires in according with heating time by high frequency induction heating. Because of increase of grain size by the growth of heating time, hardness of ${\beta}-Ti$ has reduced. Hardness of Ti-325 reduced until 2 sec and rapidly increased at 3 sec by high frequency induction heating. It is observed that hardness of Ti-325 reduces by the increase of the grain size until 2 sec and suddenly increased by the development of the detailed ${\alpha}+{\beta}$ lamella at 3 sec.

• Journal of Mushroom
• /
• v.4 no.3
• /
• pp.101-105
• /
• 2006

This was performed to improve the working conditions of oyster mushroom cultivation on bed using rice straw of which binding and cutting procedure need a lot of time. There was a little difference in physiochemical components between rice straw and cotton waste C/N ration of cotten waste was, however, similar to rice straw as 84-85. If is feasible to use as substrate material. The average yield of a net was 1450g in six frustration harvest, when the size of an onion net was $35{\times}30cm$, mixture ratio of rice straw to cotton waste was 40:60(V/V). Cultivation method using an onion net saved 3 days for preparation, 4 hours for inoculation compared to normal bed cultivation. This method was analysed to give 5% economical benefit.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.357-368
• /
• 2003

Evaluation of shape similarity for 3D models is essential in many areas - medicine, mechanical engineering, molecular biology, etc. Moreover, as 3D models are commonly used on the Web, many researches have been made on the classification and retrieval of 3D models. In this paper, we describe methods for 3D shape representation and major concepts of similarity evaluation, and analyze the key features of recent researches for shape comparison after classifying them into four categories including multi-resolution, topology, 2D image, and statistics based methods. In addition, we evaluated the performance of the reviewed methods by the selected criteria such as uniqueness, robustness, invariance, multi-resolution, efficiency, and comparison scope. Multi-resolution based methods have resulted in decreased computation time for comparison and increased preprocessing time. The methods using geometric and topological information were able to compare more various types of models and were robust to partial shape comparison. 2D image based methods incurred overheads in time and space complexity. Statistics based methods allowed for shape comparison without pose-normalization and showed robustness against affine transformations and noise.

• Journal of Hospice and Palliative Care
• /
• v.11 no.2
• /
• pp.78-81
• /
• 2008

Purpose: The end of one's life can be one of the most important times in human life. However, physicians, nurses and volunteer workers are not sufficiently trained to understand the end-life care with competence and confidence. The purpose of this study was to compare various education programs currently carried out for volunteer workers. Methods: Nine curricula of hospice and palliative cares for volunteer workers at hospital and palliative care settings. Results: The mean time duration of theory education at nine institutes was 21.56 hours (range; 14-30). The common curricula of hospice and palliative cares for volunteer workers included 'Understanding of hospice and palliative care', 'Understanding of life and death', and 'Understanding of psychologic problem of end-of-life'. The education method comprised lectures, off-line 8 institutes and on-line 1 instiutute. Conclusion: It is necessary to develop the standard curriculum as well as regularly updated education program for volunteer workers.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.1
• /
• pp.45-50
• /
• 1990

The basic investigation of the sea eel pots fisheries by questionnarie observation and dimension of the pots by fishing operation were carried out in order to develop for mechanical hauling system with 20~50 gross tonnage fishing boats from June to December, 1988. Number and weight of fish per pot between smaller diameter 11cm and larger 13cm of the pot have no significance so that the drag of the smaller pots can be decreased about 20% than the larger pots. The operating time by two men from opening to closing with screwing lock entrance was slightly faster than that by three men with knotting entrance even though the losses with two kinds of entrances while fishing operation were about the same. It was very reasonable that stone and lead sinker on the main line were substitute for two or three lead core P.P rope to make it smooth surface of the main line for mechanization of the continuous fishing operation.