• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.31-33
• /
• 2011

최근 국내에는 원활한 교통 흐름을 위해 연륙교, 연도교등 다수의 해상 교량을 보유함에 따라 통항 안전 관련 해상사고 발생 가능성이 증가하고 있다. 반송파 위상정보를 이용한 정밀측위기법을 선박항해에 적용하기 위해서는 항해시 교량 및 시설물 등의 영향으로 위성 신호세기가 미약해지는 환경에서도 정밀측위의 연속성을 유지해야한다. 그러나 반송파 위상 정보는 미약한 위성신호세기 환경에서 측정잡음이 급격히 증가하여 반송파 미지정수 검색 및 유지를 어렵게하고 이로 인해 정밀측위를 불가능하게 한다. 본 논문에서는 위성신호가 미약해지는 환경에서 정밀측위의 연속성을 유지하기 위하여 관성센서 정보를 이용하였다. 관성센서와 위성정보를 이용하여 해당위성의 ICP(Integrated Carrier Phase)를 추정한다. 추정한 ICP를 이용하여 반송파 위성을 재구성함으로써 끊김없이 반송파 미지정수를 유지하여 연속적이며 안정적인 측위결과를 생성한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.3
• /
• pp.119-129
• /
• 2012

In the medical field, the hardening of tissues is one of important informations used in diagnosis or understanding progress of disease, a quantitative measuring method of hardening is important for objective diagnosis. It has been proposed MRE(Magnetic Resonance Elastography) method that measures an index of hardening, viscoelastic properties in a noninvasive. Because the S/N ratio of MRE images go down when measuring viscoelastic properties from local wavelength and local damping factor of a propagating wave in MRE method, methods using multiple phase MRE images have been examined to decrease the effect of noise. We propose a method measuring viscoelastic properties after Fitting a function for multiple phase MRE images in this research. This proposed method has a advantage to set up arbitrarily the variation rate of a space direction of viscoelastic properties or the spatial resolution of measuring values according to changing of the noise included in images, though it applies viscoelastic wave for multiple phase MRE images. We confirmed the effectiveness of a proposed method by experiment using simulation images and experiment using silicone-gel phantom.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.5 s.311
• /
• pp.57-67
• /
• 2006

Intellectual property rights are gathering strength theses days. Because digital contents are easily reproduced and distributed by advanced computers and networks. Digital watermarking is one of the best solutions for this problem. Generally, frequency-domain watermarking algorithms are preferred since they are more robust than spatial-domain algorithms. However, coefficients in the frequency domain are floating-point numbers. Thus, it is not easy to manipulate those floating-point coefficients and frequency-domain watermarking algorithms have some limitations in their applications. In order to overcome this difficulty, we employ an integer transform in this paper. In addition, our proposed algerian can extract the watermark from both the spatial and frequency domains. We embed the watermark into a specific bit-plane of mid-frequency coefficients. This is equivalent to the differential energy watermarking (DEW) in the spatial domain. Our simulation results show that the proposed algorithm is imperceptible, good for the watermark payload, and robustness against various attacks. Moreover, it is more efficient than any other algorithm working in only one domain.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.4
• /
• pp.29-37
• /
• 2013

In order to recycle both water sludge and waste fishing net(WFN), it was investigated in this paper the engineering characteristics of mixtures that consisted of different content of water sludge(0%, 10%, 30%, 50%) and reinforced with waste fishing net(unreinforced, untreated WFN, glue treated WFN). WFN or glue treated WFN(1&2 layers) was also added to the mixture to improve the interlocking between the soil particle and WFN. Several series of laboratory tests such as compaction test, triaxial test, oedometer test, permeability test and leaching test were carried out. The experimental test results indicated that, as water sludge content increases, maximum dry unit weight, cohesion, friction angle, and permeability of the mixture decrease, while optimum moisture content, compression index, expansion index and compressibility increase. For the case of reinforced mixture, its cohesion and friction angle are increased due to the inclusion of WFN and glue treated WFN. Leaching result of mixture was satisfied with standard of ministry of environment.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.31-39
• /
• 2004

The ARM7 TDMI microprocessor employ a software routine iteration method in order to handle integer division operation, but this method has long execution time and many execution instruction. In this paper, we proposed ARM7 TDMI microprocessor with integer division instruction. To make this, we additionally defined UDIV instruction for unsigned integer division operation and SDIV instruction for signed integer division operation, and proposed ARM7 TDMI microprocessor data Path to apply division algorithm. Applied division algorithm is nonrestoring division algorithm and additive hardware is reduced using existent ARM data path. To verify the proposed method, we designed proposed method on RTL level using HDL, and conducted logic simulation. we estimated the number of execution cycles and the number of execution instructions as compared proposed method with a software routine iteration method, and compared with other published integer divider from the number of execution cycles and hardware size.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.830-833
• /
• 2020

콜센터에서 인력 스케줄링은 매우 중요하다. 모든 콜센터에서 인건비는 고정비 성격이 강하여 차지하는 비중이 매우 높아 콜센터의 이익을 좌지우지한다. 그렇기 때문에 콜센터의 적정 인력의 고용과 배치는 인건비 뿐만 아니라 콜 성공률 또한 직결되어 있어 콜센터 운영에서 중요한 사안이라고 할 수 있다. 대부분의 콜센터가 현재까지도 관리자의 경험에 의해 인력배치를 수립하는데, 이러한 방법은 과학적이지 않으며 인원수에 영향을 미치는 모든 변수들을 고려할 수 없다. 과거 수학적 모델을 수립하는 것이었다면, 지금은 모델을 학습시키고, 학습된 모델을 기반으로 미래의 고객과 인원수를 예측해야 한다. 본 논문에서는 수리제약식을 통해 다양한 변수들을 고려하고 비선형 정수 계획법과 딥러닝 기반의 예측 값을 이용하여 비선형 정수계획법을 통해 최적의 인력배치 스케줄링을 수립하였다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.2 s.308
• /
• pp.52-62
• /
• 2006

In a fuzzy control system to process fuzzy data in high-speed for intelligent systems, one of the important problems is the improvement of the execution speed in the fuzzy inference and defuzzification stages. Especially, it is more important to have high-speed operations in the consequent part and defuzzification stage. Therefore, in this paper, to improve the speedup of the fuzzy controllers for intelligent systems, we propose an integer line mapping algorithm using only integer addition to convert [0,1] real values in the fuzzy membership functions in the consequent part to integer grid pixels $(400{\times}30)$. This paper also shows a novel defuzzification algorithm without multiplications. Also we apply the proposed system to the truck backer-upper control system. As a result, this system shows a real-time very high speed fuzzy control as compared as the conventional methods. This system will be applied to the real-time high-speed intelligent systems such as robot arm control.

• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.177-189
• /
• 2009

The shear strength has been managed as an important factor in soil mechanics. The shear strength estimation model was developed to evaluate the shear strength using only a few soil properties by the linear regression analysis model which is one of the statistical methods. The shear strength is divided into two part; one is the internal friction angle (${\phi}$) and the other is the cohesion (c). Therefore, some valid soil factors among the results of soil tests are selected through the correlation analysis using SPSS and then the model are formulated by the linear regression analysis based on the relationship between factors. Also, the developed model is compared with the result of direct shear test to prove the rationality of model. As the results of analysis about relationship between soil properties and shear strength, the internal friction angle is highly influenced by the void ratio and the dry unit weight and the cohesion is mainly influenced by the void ratio, the dry unit weight and the plastic index. Meanwhile, the shear strength estimated by the developed model is similar with that of the direct shear test. Therefore, the developed model may be used to estimate the shear strength of soils in the same condition of study area.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.731-741
• /
• 1997

Optimum design conditions of rapid mixing impellers for an effective Water Treatment Plant operation were experimentally studied by thorough examination of parameters, such as impeller type and detention time. which govern the removal efficiency of turbidity. It was found that the impeller type is one of the major parameters governing the economic power consumption and the efficiency of turbidity removal. The experimental results showed that not only the velocity gradient G but also a new design guide. so called mixing energy per unit volume of raw water, could be used as a design and operation guides for rapid mixing in W.T.P.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.49-54
• /
• 1991

In this study the correlation between material constants and microwave absorbing characteristics of ferroxplana composite microwave absorber used in X-band was investigated. The real part of permeability(${\mu}_{r}'$) was decreased and the imaginary part of permeability(${\mu}_{r}"$) of ferroxplana composite was increased with increaing ferroxplana loading ratio(F/R). The frequency showing maximum attenuation was shifted to lower frequency with increasing absorber thickness. The absorber 2.6 mm thick showed good band width property and 3.2 mm thick showed good attenuation property. From the apphcation of ferroxplana composite's material constants to the region of material constants which satisfy broad band width, it is found that the absorbing characteristics were estimated quantitatively. Estabhshment of material constants' region which satisfies broad band width can make practical application to design of high performance ferrite microwave absorber.