• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.1-10
• /
• 2013

In this study utilize industry product for OPC(ordinary portland cement) and BFS(blast furnace slag) mixing concrete early age compressive strength elevation and executed study for high strength binder. Association ratio of industry product for high strength binder manufacture is Titanogypsum (4) : Limestone (3) : Waterworks Sludge by ratio of (3) as it is proper move. high strength binder mixing rate appeared that (7~9) % are proper via preliminary test. Could confirm that display high compressive strength incidence rate in early age than plain harmony according as mix high strength binder mixing concrete compressive strength high strength binder. Also, high strength binder generality that give function than high strength binder used in existing displayed more excellent intensity, and compressive strength displayed result that multiply single breadth according as high strength binder substitute that give function increases.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.349-353
• /
• 2008

In this paper, the EM wave absorber was designed and fabricated for preventing Reader Interference of RFID communication system in UHF band We fabricated several samples in different composition ratios of Amorphous and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Amorphous and CPE was searched as 80 : 20 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has a thickness of 4 mm and absorption ability was over 20 dB in frequency range of $860\;MHz{\sim}960\;MHz$. Therefore, it was confirmed that the developed absorber can be used for suppressing RFID reader interference in UHF band.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.478-478
• /
• 2011

중소규모 댐 계획시, 댐 하류 홍수피해 저감, 합리적 운영, 유지관리 및 경제성 측면올 고려한 댐 계획은 무엇보다 중요하다. 지금까지 국내에서 계획/건설된 대규모 뱀에서와는 달리, 비교적 작은 규모의 유역에 있어서 댐 계획은 댐 유역 및 저수지의 수리 수문학적 특성 즉, 빠른 시간에 홍수량의 저수지 유입으로 저수지 수위가 급상승하는 등, 일반적인 기존 댐들과는 다른 특정을 지닌 중소규모유역 댐의 여수로 계획을 소개하고자 한다. 여수로 계획을 한 댐 유역의 특성으로 유역면적 약 $33km^2$, 총저수용량 2,211 만 $m^3$, 홍수조절용량 349만 $m^3$의 소규모 저수지를 가진 댐이다. 지방하천 최상류에 위치하는 유역면적이 작은 댐에서의 일반적인 수문학적 특징은 홍수도달시간이 1 시간 내외로 빠르고, 저수지 수위상승 속도가 0.2~0.3m/분 정도로 빠르게 나타난다. 이러한 수리 수문학적 특징 때문에 댐 여수로 수문 조작시간이 충분치 않으므로, PMF 유입과 같은 긴급한 상황에서는 댐을 월류할 가능성을 배제할 수 없다. 따라서 일반적으로 대규모 댐의 여수로 수문을 이용, 단독으로 홍수조절을 수행하던 기존 댐들과는 달리 소규모 댐에 적합한 특성을 지닌 여수로 계획의 필요성이 대두된다. 검토대상 여수로 형식으로는 국내 다목적댐에서 대부분 채택하고 있는 조절형 여수로, 무문식 여수로를 도입한 조절형+비조절형 여수로, 방류관식 여수로, 복합형 여수로 등을 안전성, 유지관리성 및 시공성 측면 등을 다각적으로 검토하였으며, 그 결과로 소규모 댐의 여수로 형식으로는 조절형+비조절형 여수로가 가장 적합한 형식이라고 판단하였다. 그러나, 여수로 형식 이 조절형+비조절형과 같이 폭이 100m가 넘는 광폭의 여수로에서 등폭 도수로를 채택할 경우 감세공의 폭이 과다해지는 문제점은 등폭 도수로와 도수로 끝단부에 도류벽을 설치하여 유수 에너지를 도류벽에서 1 차 감세한 후 댐에서 보편적인 정수지형 감세공으로 유수를 소통시키는 형식으로 계획하였다. 이러한 측수로형 감세공을 도입하여 정수지형 감세공 규모를 줄이는 경제적인 효과도 얻을 수 있도록 계획하였다.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.626-631
• /
• 2014

Water purification requires a large amount of energy that can cause pollution problems. For this reason, forward osmosis (FO) has attracted intense interest that required a relatively low amount of energy for water purification. The forward osmosis has a serious problem that it needs drawing agents creating osmotic pressure to extract water from contaminated water. In this study, a copolymer of zwitterionic moiety and an interpenetrating polymer network (IPN) hydrogel based on thermo-responsive polymer hydrogel, poly(N-isopropylacrylamide) (PNIPAM) were prepared and attached on FO membranes, which successfully played the role of drawing agents. In the copolymer hydrogel, its swelling ratio was improved, but thermo-sensitivity was decreased. The swelling ratio and thermo-sensitivity of IPN hydrogel was lowered. We could confirm that swelling ratio is related to osmotic pressure.

• Journal of Wetlands Research
• /
• v.11 no.1
• /
• pp.65-73
• /
• 2009

We investigated characteristics of channel morphology, flora and vegetation distribution at the main and the abandoned channels of the Hwangguji Stream and the Cheongmi Stream. The analysis of aerial photographs and old topographical maps showed that the abandoned channels were made by cut-off from the main channel due to the construction of artificial levee. The total number of species and percentage of exotic plants at the main channels were higher than those at the abandoned channels. At the abandoned channel, the percentage of species number of hydrophytes and hygrophytes was higher than those at the main channels in the both stream. The results of principal component analysis (PCA) showed that the floral structure between at the main and the abandoned channel was more similar in the Hwangguji Stream than that in the Cheongmi Stream. The relative distribution areas of hydrophytes and hygrophytes at two abandoned channels were much higher than those at the main channels in the both stream. The dominant plant was an emergent macrophyte, Zizania latifolia at two abandoned channels. Therefore, flora and vegetation at the abandoned channel showed more hydric and lentic characteristics and provided diversity on the landscape level.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.193-197
• /
• 2009

In this paper, the EM wave absorber was designed and fabricated for improvement of Wireless LAN environment at 2.4 GHz. We fabricated several samples in different composition ratios of Sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Sendust and CPE was searched as 80: 20 wt.% by experiments and simulation Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the EM wave absorber was fabricated based on simulated data. Simulated and measured results agreed well. As a result, the developed EM wave absorber with thickness of 3.25 mm has absorption ability of 19 dB at 2.4 GHz.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.2
• /
• pp.105-116
• /
• 2010

The estimation of surface settlement, ground behavior and tunnel displacement are the main factors in urban tunnel design with shallow depth and unconsolidated soil. On deformation analysis of shallow tunnel, it is important to identify possible deformation mechanism of shear bands developing from tunnel shoulder to the ground surface. This paper investigated the effects of key design parameter affecting deformation behavior by numerical analysis using nonlinear model incorporating the reduction of shear stiffness and strength parameters with the increment of the maximum shear strain after the initiation of plastic yielding. Numerical parametric studies are carried out to consider the reduction of shear stiffness and strength parameters, horizontal stress ratio, cohesion and shotcrete thickness.

• Economic and Environmental Geology
• /
• v.46 no.3
• /
• pp.215-220
• /
• 2013

We estimated the hydraulic conductivity of the sediments using constant-head permeability tests and electrical resistivity measurements with Jumoonjin standard sand of a uniform size and glass beads of different grain sizes. In this study, we determined the variations of the porosity, the hydraulic conductivity, and the resistivity in case 1 (changing the packing of the Jumoonjin standard sand) and in case 2 (varying the size of the glass beads). The results of case 1 showed that the hydraulic conductivity decreased with an increase in the electrical resistivity. This occurred because the sand grain while packing became rhombohedral with the a decrease of both the pore size and porosity. The results of the case 2 showed that the hydraulic conductivity increased due to the increase in the pore size as caused by the increased glass bead size. In addition, the porosity decreased and the electrical resistivity increased. Therefore, the relationship between the hydraulic conductivity and the electrical resistivity is negatively proportional as regards the grain packing with a change from cubic to rhombohedral whereas this relationship is positively proportional to the increase in the grain size.

• Journal of The Korean Association For Science Education
• /
• v.22 no.3
• /
• pp.604-616
• /
• 2002

The purpose of this study was to analyze the development of the compensational thinking by the compensation activities of 'Thinking Science' program. The 138 students were sampled in elementary schools and were divided into two groups, the experimental group of 74 students and the control group of 64 students. Both the compensation activities of the 'Thinking Science' program and a regular science curriculum were implemented to the experimental group, while only a regular science curriculum to the control group. Both experimental and control group were pre-tested with Science Reasoning Task II and compensational thinking test I and were post-tested with compensational thinking test II. This study revealed that the types of strategies used in compensation problem solving were categorized as illogical explanation, rule automation, proportionality, explanation in qualitative terms, additive quantification, inverse proportionality and were related to the context of the items. It was found that compensation activities of the 'Thinking Science' program were effective on the development of the compensational thinking.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.393-399
• /
• 2005

본 논문은 현재 교통사고로 인한 피해가 심각한 상황에서 기존 교통사고 원인분석을 위한 많은 양의 자료를 효과적으로 처리할 수 있는 WebGIS 기반 교통사고 정보관리 시스템을 개발하였다. 더불어 교통정보를 어떻게 구성하고 어떤 방법으로 전달할 것인가에 대한 방안을 제시하고, 교통사고 정보에 대한 비공간적인 속성뿐만 아니라 도형자료와 기본적인 수치지도 등을 통합 관리할 수 있도록 하였다. 또한 교통사고 자료가 일반인들에게 제공되기 위한 준비 기간이 길었던 종래 방식에 비해 데이터 입력이 완료되는 즉시 인터넷을 통해 해당 지역의 교통사고 정보를 제공하는 실시간 교통사고 현황 정보제공 기능을 구현하였다. 이전의 단순한 집계에 의한 비공간적인 데이터를 사용한 교통사고 분석보다는 교통사고의 자세한 내용 및 통계자료와 함께 사고위치를 시각적으로 도시하여 가시적으로 주변 환경을 파악할 수 있는 기능을 제공하였으며 사고 담당 경찰관과 직접 연계할 수 있는 인터페이스를 제공하였다.