• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.117-122
• /
• 2008

Although the pulse diagnosis is the one of the most important diagnostic process to traditional medical doctors, there is no proper communication tool between experts and trainees. In this paper, we have developed a indentation training system which consists of a hardware measuring indent pressure on artificial arm quantitatively and a software providing a indentation training program. The hardware for measurement of indent pressure profile includes 3 load cells embedded in the artificial arm, signal amplification part and digitization part, NI-USB 6009 with 200Hz sampling rate. For setting up a relationship table between weights and output voltages, 8 standard weights were used. To evaluate this hardware, 3 oriental medical specialists were involved and their indent pressure profile were recorded three times respectively. From these, it was found that pulse diagnosis process could be divided into 3 periods and the maximum load were $500g{\cdot}f$ approximately while doctors perform a pulse diagnosis. The indentation training program was implemented with LabView and designed to monitor the differences between the pressure profile of a expert and that of a trainee so to offer some visual feedback to the trainee. Also, this program could provide the trends of training performances. With this developed system, the education of pulse diagnosis is expected to be more quantitative and effective.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.461-466
• /
• 2011

In genetic and molecular breeding studies of plants, researchers need to design various kinds of primers based on their research purposes. So far many kinds of web- or script-based non-commercial programs for primer design are available. Because most of them do not include user interface for multipurpose usage including gene structure prediction and direct target selection on sequences, it has been a laborious work to design primers targeting on the exon or intron regions of interesting genes. Here we report a primer designing graphic user interface program, Pickprimer, that includes gene structure prediction and primer design modules by combining source codes of the Spidey and Primer3 programs. This program provides simple graphic user interface to input sequences and design primers. Genomic sequence and mRNA or coding sequence of genes can be copy and pasted or input as fasta or text files. Based on alignment of the input sequences using the Spidey module, a putative gene structure is graphically visualized along with exon-intron sequences of color codes. Primer design can be easily performed by dragging mouse on the displayed sequences or input primer targeting position with desirable values of primers. The output of designed primers with detailed information is provided by the Primer3 module. PCR evaluation of 24 selected primer sets successfully amplified single amplicons from six Brassica rapa cultivars. The Pickprimer will be a convenient tool for genetic and molecular breeding studies of plants.

• Journal of Korea Multimedia Society
• /
• v.2 no.1
• /
• pp.69-79
• /
• 1999

We have implemented the telecommunication management functions based on TMN (Telecommunications Management Network) architecture that is standardized by ISO/ITU-T. TMN has been developed to manage heterogeneous networks, services and equipment. In this paper, we first analyze the detailed functions of EMS (Element Management System) that performs core functions in the subnetwork management of TMN architecture. We propose an implementation method of EMS for efficient subnetwork management and verify its performance and functionality through detailed implementation and various testing. The proposed EMS consists of EML-Manager module and NML-Agent module. The EML-Manager module controls NEL (Network Element Layer) through the CMIP operations on the managed-objects. The NML-Agent module processes the requests from NMS (Network Management System) in upper layer. We have implemented NMS that performs only the NML-Manager function to test the proposed EMS, and we have used NE-Agent that was designed and implemented by the B-ISDN Lab. of Yeungnam University. The implemented EMS has three management functions: configuration management function, performance management function, and fault management function. We confirmed that the EMS operated normally as we tested the EMS. As further research works, the implementation of NMS with both NML-Manager function and SML-Agent function is required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.905-910
• /
• 2013

Road facility has the high possibility of being damaged or destroyed due to continuous pass of the vehicles, overloaded vehicles, traffic accidents and so on and stormwater manhole, sewerage manhole that are installed on the road may cause the functional degradation in case of periodic pavement of the road. So management through establishing DB of road facility and efficient updating plan are required. Thus, this study used DGPS camera for efficient establishment and improvement of road facility DB. Applicability of DGPS camera could be suggested by satisfying the allowable accuracy required for establishing DB of road facility through the comparative analysis with the result of establishment of existing road facility DB and the process of DB establishment by existing total solution could be improved through process analysis. And the existing DB of road facility was improved so that the present conditions of surrounding topography and road facility can be grasped by developing the module that can add the images of road facility to digital map and Google Earth-based KML Builder. It is expected that road facility service that provides various information can be available if the spatial data of each local self-governing body and study of automation that utilizes DGPS camera images are accomplished hereafter.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.27-33
• /
• 2018

This study was performed to review the domestic and international smart farm service model based on the convergence of agriculture and information & communication technology and derived various factors needed to improve the Korean smart greenhouse. Studies on modelling of crop growth environment in domestic smart farms were limited. And it took a lot of time to build research infrastructure. The cloud-based research platform as an alternative is needed. This platform can provide an infrastructure for comprehensive data storage and analysis as it manages the growth model of cloud-based integrated data, growth environment model, actuators control model, and farm management as well as knowledge-based expert systems and farm dashboard. Therefore, the cloud-based research platform can be applied as to quantify the relationships among various factors, such as the growth environment of crops, productivity, and actuators control. In addition, it will enable researchers to analyze quantitatively the growth environment model of crops, plants, and growth by utilizing big data, machine learning, and artificial intelligences.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.78-87
• /
• 2011

A variety of intelligent application using the sensor network system is being studied. In general, the sensor network consists of nodes which equipped with a variety of sensing module and is utilized to collect environment information. Recently, the demands of multimedia data are increasing due to the demands of more detailed environmental monitoring or high-quality data. In this paper, we overcome the limitations of low bandwidth in Zigbee-based sensor networks and propose a routing algorithm for real-time multimedia data transmission. In the previously proposed algorithm for multimedia data transmission occurs delay time of routing setup phase and has a low data transmission speed due to bandwidth limitations of Zigbee. In this paper, we propose the hybrid routing algorithm that consist of Zigbee and Bluetooth and solve the bandwidth problem of existing algorithm. We also propose the disjointed multipath setup algorithm based on competition that overcome delay time of routing setup phase in existing algorithm. To evaluate the superiority of the proposed algorithm, we compare it with the existing algorithm. Our experimental results show that the latency was reduced by approximately 78% and the communication speed is increased by approximately 6.9-fold.

• The Journal of the Korea Contents Association
• /
• v.9 no.5
• /
• pp.50-60
• /
• 2009

Recently, the traffic card is gradually utilized and its several supplementary services have been significantly developed. Particularly, since it is possible to pay fees for buses, taxies, subways, parking and tollgates with only one traffic card, new payment method for economically processing has been focused. This paper presents a new receipt management system which allows possibly paying with several digital cards through PC interfacing terminals. The proposed system is mainly composed of three parts: terminals, middleware, and management servers. A terminal part includes processing module for payment/charging and credit/check/debit cards, etc and its operation is fulfilled through a middleware part. A main task of a middleware part is to connect a terminal part to managing servers through middleware applications. Additionally, processing of several receipt items and monitoring of the terminals to product statistical reports based on the processed result are carried out in the middleware. A management sever part is accomplished for collecting all of transaction histories against users and charging items over allowed province and managing statistical information. The proposed system is currently utilized in the Nam-GU district office and the Nam-GU district health center, Busan, S. Korea, respectively for testing its effectiveness. We conclude from this demonstration that the system is more useful and efficient than the previous processing method especially in that variable payment ways are provided and consumption burden is reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.811-817
• /
• 2009

The rapid growth of network based IT systems has resulted in continuous research of security issues. Probe intrusion detection is an area of increasing concerns in the internet community. Recently, a number of probe intrusion detection schemes have been proposed based on various technologies. However, the techniques, which have been applied in many systems, are useful only for the existing patterns of probe intrusion. They can not detect new patterns of probe intrusion. Therefore, it is necessary to develop a new Probe Intrusion Detection technology that can find new patterns of probe intrusion. In this paper, we proposed a new network based probe intrusion detector(NePID) using anomaly traffic analysis and fuzzy cognitive maps that can detect intrusion by the denial of services attack detection method utilizing the packet analyses. The probe intrusion detection using fuzzy cognitive maps capture and analyze the packet information to detect syn flooding attack. Using the result of the analysis of decision module, which adopts the fuzzy cognitive maps, the decision module measures the degree of risk of denial of service attack and trains the response module to deal with attacks. For the performance evaluation, the "IDS Evaluation Data Set" created by MIT was used. From the simulation we obtained the max-average true positive rate of 97.094% and the max-average false negative rate of 2.936%. The true positive error rate of the NePID is similar to that of Bernhard's true positive error rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.42-48
• /
• 2016

In this paper, a high-precision peak detector circuit that detects the output voltage information of a fly-back converter is proposed. The proposed design consists of basic analog elements with only one operational amplifier and three transistors. Because of its simple structure, the proposed circuit can minimize the delay time of the detection process, which has a strong impact on the precision of the regulation aspect of the fly-back converter. Furthermore, by using an amplifier and several transistors, the proposed detector can be fully integrated on-chip, instead of using discrete circuit elements, such as capacitors and diodes, as in conventional designs, which reduces the production cost of the fly-back converter module. In order to verify the performance of the proposed scheme, the peak detector was simulated and implemented by using a 0.35 m MagnaChip process. The gained results from the simulation with a sinusoidal stimulus signal show a very small detection error in the range of 0.3~3.1%, which is much lower than other reported detecting circuits. The measured results from the fabricated chip confirm the simulation results. As a result, the proposed peak detector is recommended for designs of high-performance fly-back converters in order to improve the poor regulation aspect seen in conventional designs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.285-293
• /
• 2016

In the paper, we propose a data transmission repeating system that allows data transmission for the effective supervision of cows grazing in the pasture. It is normal practice to divide the pasture into different areas for the purpose of distributing the grazing. However, this makes it difficult to supply electrical power and transmit data, because some of the pastures are far away from the office used for collecting data. To solve this problem, we developed a repeating system that can allow data transmission in the pasture using a solar charging system that consists of a 60W solar panel, 12V/100A battery and 6A solar controller for the power supply and a data transmission algorithm which extends the range of data transmission when using the proposed repeating system. We verified the performance of the repeating system by checking whether the data transmission is successful or not when transmitting from various test points when there is an obstacle between the receiver and repeating system. We also verified the solar charging system by measuring the battery voltage when the system is operated continuously for 31 days and whether the system can supply sufficient power when the weather is cloudy or rainy for a few days. Finally, we verified the performance of the repeating system and data transmission algorithm by conducting experiments in a pasture.