• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.613-622
• /
• 2015

The convergence of IT technology and marine facilities monitoring system is needed for effective monitoring systems to marine facilities. Especially the spread of smart device such as smart phone, smart pad, smart TV provide an environment that can check the status of the marine facility for marin facilities manager. However, smart phones and smart pads are used in a variety of OS used. Thus the monitoring system of the various service environments is difficult. In addition, There is inconvenience that must individually developed monitoring system for each device. In order to solve this problem NMMS (N-Screen Marine-facility Monitoring System) is proposed. NMMS is consist of Real-time monitoring system, Fault diagnosis system, Data storage system. To improve variety of smart devices accessibility, we use HTML 5. Through NMMS, marine facilities manager can use smart device such as PC, Notebook, smart phone, smart pad for marine facilities monitoring.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1292-1305
• /
• 2013

Along with the strengthening vehicle environmental regulations and the growing needs for the energy consumption reduction technology, the researches on the engine idle stop system, have been briskly carried out around the automobile manufacturers before the development of alternative energy. Furthermore, there is a movement to disseminate the environment friendly idle stop system by combining the system to the generalized smart key system to not only increase purchasing but also provide the convenience and save the energy as well. In this paper, we designed and implemented the idle stop system algorithm for the aftermarket smart key system with the OBD-II interface. The implemented start stop system is capable of controlling two independent systems, the smart key system and intelligent idle stop system, on a single ECU. In addition, the implemented start stop system standardizes the communication interface with the vehicles to reduce the time required for installing the start stop system to the various vehicles, and satisfies every standard response time limit for the vehicle status request signals.

• International Commerce and Information Review
• /
• v.18 no.2
• /
• pp.151-167
• /
• 2016

This study is focus on the relationship between the role of FTA and service trade performance enhancing strategy in Korea. and It is on the verification of the focus to the competitive promoting strategy of the logistics industry. finally proposition of the policy making to the government is proposed in the research. The invigoration of the service trade through FTA focus on the logistics industry is very combinative economy policy target with the side of government and the side of private enterprises both. added to this, this is the goal of impossible to achieve just with the development of logistics industry itself. it needs to construct the organic relationship, that is the implement and enforcement of the SCM through logistics industry network. Thus, on logistics, the 3rd party operating system implementation is top priority to gain international competitiveness. furthermore, the 4th party facilitation including consulting function and IT technology to pursue the maximum effectiveness logistics service providing.

• Journal of KIISE
• /
• v.45 no.1
• /
• pp.36-44
• /
• 2018

Due to the advent of the 4th Industrial Revolution, it is imperative that we aggressively continue to develop state-of-the-art, cutting edge ICT technology relative to autonomous vehicles, intelligent robots, and so forth. Especially, systems based on convergence IT are being developed in the form of CPSs (Cyber Physical Systems) that interwork with sensors and actuators. Since conventional CPS specification only expresses behavior of one system, specification for collaboration and diversity of CPS systems with characteristics of hyper-connectivity and hyper-convergence in the 4th Industrial Revolution has been insufficiently presented. Additionally, behavioral modeling of CPSs that considers more collaborative characteristics has been unachieved in real-time application domains. This study defines the non-functional requirements that should be identified in developing embedded software for real-time constrained collaborating CPSs. These requirements are derived from ISO 25010 standard and formally specified based on state-based timed process. Defined non-functional requirements may be reused to develop the requirements for new embedded software for CPS, that may lead to quality improvement of CPS.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.655-663
• /
• 2017

With the development of ICT technology, the indoor utilization of robots is increasing. Research on transportation, cleaning, guidance robots, etc., that can be used now or increase the scope of future use will be advanced. To facilitate the use of mobile robots in indoor spaces, the problem of self-location recognition is an important research area to be addressed. If an unexpected collision occurs during the motion of a mobile robot, the position of the mobile robot deviates from the initially planned navigation path. In this case, the mobile robot needs a robust controller that enables the mobile robot to accurately navigate toward the goal. This research tries to address the issues related to self-location of the mobile robot. A robust position recognition system was implemented; the system estimates the position of the mobile robot using a combination of encoder information of the mobile robot and the absolute space coordinate transformation information obtained from external video sources such as a large number of CCTVs installed in the room. Furthermore, vector field histogram method of the pass traveling algorithm of the mobile robot system was applied, and the results of the research were confirmed after conducting experiments.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.49-58
• /
• 2015

Up to the present point in time, the level diagnosis system for urban reactivation have utilized various methods for establishment and management in Korea and overseas, such as city competitiveness evaluation, urban decay diagnosis, etc. However, contrary to performing diagnosis and evaluations on general cities in existing studies, it is found to be a very complex and difficult task to perform a diagnosis on the level of U-City due to its unique characteristics. It is difficult to determine the level of a U-City using a level diagnosis system used for general cities because a U-City is comprised of a connection/fusion of various structural elements. Therefore, in order to perform a systematic diagnosis of a U-City, it is necessary to primarily observe the structural characteristics of a U-city to derive a diagnosis system based on the relativity between each structural element. This study aims to propose a directivity of a U-City level diagnosis system in comprehensive consideration of various elements, such as the objective of a U-City, as well as the structural elements that compose a U-City based on the definitions prescribed in U-City legislations, including ubiquitous city planning, ubiquitous city infrastructure, ubiquitous city technology, services, etc. The results of this study are expected to provide a resolution for the regional quality differences of U-Cities, and also establish a stepping-stone for the realization of U-Cities with high degree of completion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.8
• /
• pp.1107-1113
• /
• 2018

Ultrasonography and photodynamic therapy have been proposed as useful tools as a treatment for inducing necrosis of cells using reactive oxygen species. Apoptosis is an internal mechanism necessary for cells regardless of damage. Ultrasound has the effect of inducing the apoptosis of these cells, and the frequency of 1 MHz is the most applicable area for medical use. The laser which is generally used in photodynamic therapy has a heat reaction and the treatment is limited. However, as a small light emitting diode is developed, it shows possibility to minimize the equipment and reduce heat reaction. On the other hand, there are relatively few researches on direct effects of light compared with studies using photosensitizers, and the area is also limited. Therefore, in this paper, we have developed a cancer cell proliferation control module using ultrasonic and light emitting diodes, which have relatively few side effects, and quantitatively analyze the effect of the module to propose an optimal suppression technique.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.67-76
• /
• 2011

This paper describes the development of interactive visualization techniques and a program that allow us to visualize the structure of the volume data and interactively select and visualize the isosurface components using contour tree. The main characteristic of this technique is to provide an algorithm that draws the contour tree in 2D plane in a way that users easily understand the tree, and to provide an algorithm that can efficiently extract an isosurface component utilizing GPU's parallel architecture. The main characteristic of the program we developed through implementing the algorithms is to provide us with an interactive user interface based on the contour tree for extracting an isosurface component and visualization that integrates with previous isosurface and volume rendering techniques. To show the excelland vof our methods, we applied 3D biomedical volume data to our algorithms. The results show that we could interactively select the isosurface components that represent a polypeptide chain, a ventricle and a femur respectively using the user interface based on our contour tree layout method, and extract the isosurface components with 3x-4x higher speed compared to previous methods.

• Journal of Industrial Convergence
• /
• v.18 no.5
• /
• pp.42-53
• /
• 2020

This study approached the elderly in Korea with a systematic review to find out the effect of virtual reality program arbitration on balance, which the evidence for the virtual reality program is provided. Total of 94 papers were searched through the database Nuri Media (DBpia), Scholarship (earticle), Korean Studies Information (KISS), National Digital Science Library (NDSL), the Korea Educational Research and Information Service (RISS), Kyobo Book Scholar (RISS), and Hakjisa New Thesis on Literature Selection using PRISMA flow-chart from January 2005 to May 2020 based on the final literature selection process and analysis. The quality level of the literature was found to be three volumes (50.0%) of the base level I, one (16.7%) of the II, and two of the III (33.3%). The most common type of virtual reality program was Wii-fit balance of 4 (66.7%), and the effect of virtual reality program arbitration was significant overall through evaluation tools for balance and walking ability. This is expected to effectively apply the virtual reality program to the elderly. In addition, since clinical application basis has been provided, further studies applying various virtual reality program interventions need to be addressed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2603-2608
• /
• 2015

Mushroom is a high in protein, low calorie food and has dietary fiber, vitamins, iron and minerals such as zinc. It is called that mushroom is one of the biggest concerns for healthy foods. When we make the artificial cultivation of mushroom, one of the greatest influence element is temperature. In this regard, farmers passively measure temperatures in the greenhouse as inaccurate way such as by the naked eyes. In this paper, we constructed a display system in order to improve the efficiency of manual management of temperature based on the influence of temperature on the mushroom. In related to the methods of mushroom cultivation, the recent technology apply the new technology such as sensors and IT convergence services. And then cultivating mushroom is managed effectively. In this paper, we implement an automatic display system for sensing data. By using this function, farmers could effectively manage environment needed to be grown mushroom, and anticipate the improvement of sales by increasing quality of mushrooms as well.