• Title/Summary/Keyword: 정밀여과

Search Result 217, Processing Time 0.034 seconds

Advanced Water Treatment of High Turbidity Source by Hybrid Process of Photocatalyst and Alumina Microfiltration: Effect of Organic Matters at Nitrogen Back-flushing (광촉매 및 알루미나 정밀여과 혼성공정에 의한 고탁도 원수의 고도정수처리: 질소 역세척시 유기물의 영향)

  • Park, Jin Yong;Sim, Sung Bo
    • Membrane Journal
    • /
    • v.22 no.6
    • /
    • pp.441-449
    • /
    • 2012
  • Effect of humic acid (HA) with periodic nitrogen back-flushing was investigated in hybrid process of alumina microfiltration and photocatalyst for drinking water treatment. It was compared and investigated with the previous results of microfiltration water back-flushing or ultrafiltration nitrogen back-flushing in viewpoints of membrane fouling resistance ($R_f$), permeate flux (J), and total permeate volume ($V_T$). As results, the trends of membrane fouling were different depending on nitrogen or water back-flushing, and depending on ultrafiltration or microfiltration made with the same material. Also, the nitrogen back-flushing using microfiltration was more effective membrane fouling inhibition than ultrafiltration, and the nitrogen back-flushing was more effective than water back-flushing using the same microfiltration membrane. Turbidity treatment efficiencies were almost constant independent of HA concentration, but HA treatment efficiency was the maximum at HA 10 mg/L. From this results, it was shown that the treated water HA quality increased as increasing HA concentration, but HA could be removed the most effectively by photocatalyst beads adsorption and photo-oxidation at HA 10 mg/L.

Appoication of Membrane Separation Technology to Wastewater and Sludge Treatment Processes (막분리 기술을 응용한 배수.슬러지처리 Process)

  • Noike, Tatsuya
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1996.04a
    • /
    • pp.20-29
    • /
    • 1996
  • 한외여과를 비롯한 막분리 기술은 의약 및 식품산업 등의 화학공학분야, 각종 제조업에서의 배수처리 및 물질회수 등에 널리 이용되는 실용기술로서 앞으로 활용이 기대되고 있다. 최근에 막분리 기술은 상.하수 및 배수 등의 수처리 분야에 있어서도 이용되고 있으며, 역침투에 의한 해수담수화, 정밀여과에 의한 탁질제거 등의 상수처리, 한외여과와 역침투에 의한 초순수제조, 한외여과와 RO등에 의한 잡용수도의 정화처리, 한외여과와 정밀여과를 고액분리장치로서 분뇨 및 하수처리 등과 같은 처리에 광범위하게 이용되고 있다. 또한 한외여과 등으로 유용미생물을 고농도로 유지하여 특정물질의 제거와 유용물질 등을 회수하는 Process도 개발되고 있다. 본 논문에서는 일본에 있어서 분리막을 도입한 배수처리 및 분뇨처리의 기술개발과 혐기성소화의 기능향상에 관한 연구의 현황에 관하여 소개하고, 분리막에 관한 한.일의 연구자간의 정보교환이 되었으면 한다.

  • PDF

Effects of Protein Denaturation on Permeate Flux Decline in Microfiltration (정밀여과에서 단백질 변성이 막투과량 감소에 미치는 영향)

  • 염경호;김민정
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1997.04b
    • /
    • pp.45-47
    • /
    • 1997
  • 정밀여과 및 한외여과에 의해 단백질 등과 같은 거대분자 물질을 분리정제할 경우 피할 수 없는 문제점은 막에 의해 분리된 거대부자들이 막표면에 쌓이는 농도분극(concentration polarization)현상과 이 누적된 거대분자가 막과의 상호작용에 의해 막표면 또는 막세공 내에 비가역적으로 침적되는 막오염(membrane fouling)현상이 일어난다는 점이다. 특히 막표면 또는 막세공 내에 분리대상 물질이 비가역적으로 침적되어 발생되는 막오염은 상대적으로 가역적 침적 과정인 농도분극보다 제어 또는 억제가 어려워 최근의 막분리 분야 연구의 상당 부분이 막오염 유발요인의 해석, 막오염을 효율적으로 제어 또는 억제하기 위한 방법의 연구에 집중되고 있다. 본 연구에서는 단백질 용액의 정밀여과시 단백질 변성이 막오염에 미치는 영향을 체계적으로 규명하기 위한 연구의 일환으로서 BSA를 분리대상 물질로하여, BSA용액을 미리 기계적 Shear(펌프 및 sonification), 열, 화학적 방법(pH 및 변성제)으로 변성시킨 후, 이 용액을 대상으로 회분식 정밀여과 실험을 수행하여 단백질 응집체 형성이 막투과량 감소에 미치는 영향을 실험적으로 검토하였으며, 각각의 막투과량 감소 특성을 아래의 4가지 blocking filtration law로서 해석하였다: complete blocking law, intermediate blocking law, standard blocking law, cake filtration law.

  • PDF

CFC필터를 이용한 대용량해수 정밀여과시스템에 관한 연구

  • Ha, Sin-Yeong;Jeong, Gyeong-Cheol;Kim, Su-Gon;Kim, In-Su
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2013.06a
    • /
    • pp.166-168
    • /
    • 2013
  • 본 연구는 기존 필터의 Back-flushing에 의한 단점을 극복할 수 있는 Cross-flushing Type으로 설계하여 필터의 막힘을 순간적으로 재생할 수 있는 역세척 원리인 Cross flushing 방식으로 새롭게 고안하여 HYDAC 필터의 역세척이 가지는 단점을 근본적으로 보완한 새로운 형태의 Filter로서 필터의 막힘을 수직방향으로 강력한 와류세척에 의해 순간적으로 재생 시킬 수 있는 기능 가지고 있어 해수의 대용량 정밀여과가 가능하다.

  • PDF

A Pilot Study for Microfiltration of Alcohol Stillage Condensate and Permeate Recycle to Fermentation Broth (알코홀 증류폐액의 Pilot Scale 정밀여과와 여과액의 발효 재활용에 대한 연구)

  • 김영범;이기세;남궁견;김종현
    • KSBB Journal
    • /
    • v.16 no.4
    • /
    • pp.403-408
    • /
    • 2001
  • Distillation condensate generated from downstream processing of microbial alcohol fermentation imposes a serious burden to biological wastewater treatment or anaerobic digestion due to its high contents of SS (suspended solids) and TN (total nitrogen), A pilot scale microfiltration of the stillage condensate with a stainless steel SCEPTER membrane of 0.1 ${\mu}$m pore size was carried out to remove SS which was mostly composed of microbial cell residue. A stable permeate flux was achieved when the decanter effluent containing 0.7% of SS was filtered under the conditions of X10 VCR (volume concentration ratio), 2.5 bar of TMP (transmembrane pressure), and 60$^{\circ}C$. When stillage condensate with 2.6% SS was treated directly with microfiltration, VCR below X3 was recommended for a long duration of filtration. The permeate and retentate obtained from microfiltration were recycled to make-up medium of fermentation. Adding permeate or retentate up to 30% of fermentation volume showed no distinguished undesirable influence during the course of alcohol fermentation. Although only slight improvements in the final amount of CO$_2$ evolution and alcohol content were observed, fermentation rate increased so that the required time to reach 450 L/ton of CO$_2$ evolution was shortened to 72% of that with normal media.

  • PDF

Application of Microfiltration and Reverse Osmosis System to Sewage Reuse for Industrial Water (하수를 공업용수로 재이용하기 위한 정밀여과 및 역삼투 시스템 적용에 관한 연구)

  • 강신경;이해군;김지원
    • Membrane Journal
    • /
    • v.12 no.3
    • /
    • pp.151-157
    • /
    • 2002
  • This research was to demonstrate the Possibility of sewage reuse for industrial purpose with use of membrane system. A bench scale test with microfiltration and reverse osmosis showed that microfiltration in the sewage treatment was not able to remove the soluble salts but 70% suspended solids (SS), suggesting that the treated water could be used as direct cooling water. In addition, the reverse osmosis removed not only soluble salts but also 95% SS, proposing that reverse osmosis-treated water could be used as both indirect cooling water and rinsing water. For a 100 ton/day pilot plant, 20 and 12 elements of microfiltration and reverse osmosis were required, respectively.

Water Treatment By VPMF (VPMF를 이용한 수처리방법)

  • 최충현;유승철
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1997.10a
    • /
    • pp.107-108
    • /
    • 1997
  • 1. 서론 : 분리막 시설의 전처리방법에는 Sand Filter, 유니필터 그리고 케트리지(5$\mu$m) 필터가 상용되어 왔다. 그러나 Sand Filter와 유니필터 등은 설치비용은 저렴하지만 처리수질이 5$\mu$m 케트리지 필터보다 떨어지므로 분리막시설의 전처리로 미흡하다. 통상적인 분리막 시설의 설계시에 사용되는 5$\mu$m 케트리지 필터는 역세가 불가능하므로 교체하지만 대규모의 수처리설비나, SS의 농도가 높은 경우에 있어서 분리막의 전처리시설로 적합치 않다. 한편 5$\mu$m 케트리지 필터는 대체하기 위한 정밀여과장치가 많이 개발되고 있으며 Z필터, BMF, Cross Filter 등이 그러한 여과장치들이다. 본 글에서 소개할 VPMF(Variable Pore Micro Filter, 가변세공 정밀여과장치)도 그러한 여과장치와 유사한 기능과 성능을 가진 정밀여과장치이다. 본 연구에서는 Caolin을 이용하여 50~100ppm 사이의 SS농도하에서 VPMF의 처리수질, 역세효율, SS포집능력 등을 평가해 볼 것이다.

  • PDF

Three Dimensional Simulation of the Deposition of Multi-dispersed Particles during Cross-flow Microfiltration (정밀여과에서 불균일 입자에 의한 막오염에 관한 3차원 모사 연구)

  • ;;;Fane, Antony G.
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1997.04b
    • /
    • pp.48-49
    • /
    • 1997
  • 막분리에 있어 막오염 현상은 공정의 경제성을 좌우하는 중요한 요소이다. 이에따라 막오염에 따른 플럭스 변화를 예측하기 위한 다양한 방법을 시도하고 있다. 그러나 대부분의 동력학적 해석식들은 여과초기에만 적용되는 단점이 있었다. 최근에는 콜로이드 입자에 의한 막오염 과정을 그대로 모사하여 여과개시 후 상당한 시간 후의 플럭스를 예측하려는 시도를 하고 있다. 그러나 지금까지 연구된 모델들은 2차원입자를 사용하거나 혹은 단일입자분포를 갖는 3차원입자를 사용한 것들이었다. 2차원 모사인 경우 세공막힘현상을 설명할 수 없으며 3차원 단일분포 입자시스템은 현실과는 거리가 먼 단점이 있었다. 이에따라 본 연구에서는 다중분포(multi-disperse)를 갖는 입자의 정밀여과 (microfiltration)를 모사하여 시간에 따른 플럭스의 변화를 예측해 보고자 하였다.

  • PDF

세라믹막을 이용한 O/W 타입 에멀젼의 정밀여과

  • 현상훈;조철구;김계태;강환규
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1994.10a
    • /
    • pp.80-80
    • /
    • 1994
  • 세라믹막을 이용한 oil 폐수 처리의 기초 연구로서 정밀여과용 세라믹막의 제조와 oil(kerosene)-in-water 타입 에멀젼에 대한 막분리 효율이 연구되었다. 정밀여과 막으로서는 압출(extrusion)법으로 성형하여 제조한 $\alpha$-알루미나 튜브(평균 기공크기 0.9 $\mum$)와 이들 튜브(담체)내부에 $ZrO_2$ 또는 $Al_2O_3$ 다공성 박막을 코팅한 2층 구조의 복합막들을 사용하였다. 담체의 높은 투과율 ($1700 l/m^2\cdot h$ at $\Deltap = 1$ atm)을 어느정도 유지하면서 막분리 효율을 증대시킬 수 있는 새로운 슬러리 코팅법이 개발되엇으며, 코팅후 950-1300$\circ$C 에서 열처리한 코팅층의 두께와 평균 기공크기는 각각 5 - 20 $\mum$정도 이었다. 정밀여과막의 특성평가를 위하여 막 제조조건에 따른 코팅층의 두께 및 결함유무를 SEM으로 일단 관찰한 후에 Bubble Point Test와 Mercury Porosimeter를 이용하여 측정한 최대 및 평균 기공반경과 물의 투과량으로부터 막 전체에 대한 결함 유무와 결함의 허용한도등을 비교 분석하였다.

  • PDF