• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.694-700
• /
• 2013

Urban area is a representative environment of wireless channels in the mobile communication, building density has a different distribution depending on the location. Building density has affect to propagation prediction For this reason, building density is expected to affect to the channel characteristics, we need to analyze it. We measured channel characteristics in urban areas of Jeju island by channel sounder and $4{\times}4$ antenna. Channel characteristics considering the building density were derived based on the measured data in the urban area. In this paper, the measurement data is analyzed and channel characteristics are derived through MIMO Channel measurements at 700 MHz considering the building density in the urban area.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.55-59
• /
• 2012

Defects such as voids or seams are frequently found in TSV via filling process. To achieve defect-free copper via filling, organic additives such as suppressor, accelerator and leveler were necessary in a copper plating bath. However, by-products stemming from the breakdown of these organic additives reduce the lifetime of the devices and plating solutions. In this research, the effects of levelers on copper electrodeposition were investigated without suppressor and accelerator to lower the concentration of additives. Threelevelers(janus green B, methylene violet, diazine black) were investigated to study the effects of levelers on copper deposition. Electrochemical behaviors of these levelers were different in terms of deposition rate. Filling performances were analyzed by cross sectional images and its characteristics were different with variations of levelers.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.156-163
• /
• 2019

This study examined the recycling system of a foreign lung excreta system. First, the measures for promoting the recycling of a pulmonary digestive system were as follows. Second, a manual considering specialization, such as the construction of a recycling treatment system of fire extinguishers and the collection, transportation, recycling, publicity, and education of fire extinguishers, were developed. Third, an education and counseling system is needed to overcome the lack of experience and technical support for systematic and safe disposal of pulmonary digestive system. Fourth, to promote the recycling of fire extinguishers in the government and fire extinguisher related organizations, it is necessary to prevent environmental pollution and recycle parts to reduce the waste of resources and improve the fire extinguisher quality by fostering a fire safety industry and policy support.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.9-15
• /
• 2019

This study focused on the application of ELID mirror-surface grinding technology to the manufacture of off-axis asymmetric large-area reflecting mirrors made of BK7 glass. The size of the parts, such as asymmetric large-area mirrors or lens, made form-accuracy or roughness especially hard to measure after machining because of the measuring range limit of measurement devices. In this study, the ELID grinding system has been set up for mirror-surface machining experiments manufacturing off-axis asymmetric lenses. A measuring method using a reference workpiece has been suggested to measure the form-accuracy and roughness. According to the experimental results, even when using only a reference workpiece, it is confirmed that the surface roughness was 8 nmRa and form-accuracy was 80 nmRMS, with a best fit asymmetric radius when using a grinding wheel of #8,000. It is found that the accuracy of large-area parts could be estimated by the proposed process.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.39-42
• /
• 2011

The composite electroplating is accomplished by adding inert materials during the electroplating. Permalloy is the term for Ni-Fe alloy and it is used for industrial applications due to its high magnetic permeability, surface wear resistance, corrosion protection. Microhardness for microdevices is enhanced after composite coating and it increases the life cycle. However, the hydroxyl group on the silica makes their surface susceptible to moisture and it causes the silica nanoparticles to be agglomerated in the aqueous solution. The agglomeration problem causes poor dispersion which eventually interrupts uniform deposition of silica nanoparticles. In this study, the dispersion of silica nanoparticles in the permalloy electroplated layer is reported with variation of additives and current densities. The optimum current density was 20 $mA/cm^2$ and the silica content was 9 at% at $50^{\circ}C$. The amount of silica nanopowder codeposition and surface morphologies were influenced with variation of additives. In the bath, smooth surface morphology and relatively high contents of silica nanopowder codeposition were obtained with addition of sodium lauryl sulfate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.334-340
• /
• 2007

The prediction for vegetation attenuation using the RET model recommended in the ITU-R requires six RET input parameters. Among these, 4 parameters are related to the scattering characteristics of vegetation. To extract these parameters, two methods can be used. One is to extract the parameters by curve fitting of the measured vegetation-attenuation curve with the RET prediction model, and the other is to use the additional phase function measurement data. In the former method, fitting is quite complex and it does not result in the unique results in some cases. In addition, the extracted parameters lack the physical meaning as well. Thus, in this paper, the measurement method of phase function, and the method of extracting the RET model parameters which lead to more accurate and physically more meaningful results are presented. The extracted RET model parameters are also presented. The RET modeling method, measurement data, and the extracted RET model parameters presented in this paper were submitted to the ITU-R meeting in 2006, and adapted for ITU-R report and recommendation P.833.