• Title/Summary/Keyword: 정류특성

Search Result 319, Processing Time 0.027 seconds

The Electrical Properties of Hydrogenated Diamond Thin Film, MS and MIS Diamond Diodes (수소함유 다이아몬드 박막과 MS 및 MIS 다이아몬드 다이오드의 전기적 특성)

  • 이철로;임재영;천병선
    • Journal of the Korean Vacuum Society
    • /
    • v.3 no.1
    • /
    • pp.103-110
    • /
    • 1994
  • 기전력 증가에 따라 균일 두께로 4종류 다이아몬드 박막을 성장하였다. 이들에 대해 성장직후 및 진공소둔 후 전기전도도를 조사한 결과 성장 중 기전력이 증가하면 다이아몬드 결정내에 원자상 수 소의 혼입이 증가되어 높은 전기전도도를 나타낸다. 고진공소둔에 의해 탈가스를 하면 원자상수소가 제 거되어 전기저도도를 감소시킬 수 있다. 그러므로 다이아몬드 박막을 유전체 박막에 응용하기 위해서는 진공 탈가스가 필요하다. MS 및 MIS 구조 다이아몬드 다이오드를 제조하여 정류특성을 평가한 결과 저농도 MS구조는 극히 낮은 정류특성을 나타내며 고농도는 Ohimc 거동을 하였다. MIS구조에서는 저 농도 및 고농도 모두 우수한 정류특성을 나타냈다. 그러므로 다이아몬드 박막으로 MIS구조에 의한 다이 오드를 제조하므로써 고속 고출력 전자소자 및 고온 고방사, 원자료, 우주 등 열악한 환경하에서 사용될 수 있는 전자소자의 가능성이 높다고 사료된다.

  • PDF

Fabrication and Characteristics of 300V Mo-MPS Rectifier (300V용 Mo-MPS 정류기의 제조 및 그 특성)

  • 최형호;박근용;김준식;최시영
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.40 no.6
    • /
    • pp.393-399
    • /
    • 2003
  • The current paper presents a new Mo-MPS rectifier using molybdenum as barrier metal to improve on the low forward voltage drop and power dissipation of the coventional Al-MPS and Pt-MPS rectifier. Electrical characteristics of the fabricated Mo-MPS rectifier are imvestigated compared with Al-MPS and Pt-MPS rectifier. At the same current level, the forward voltage drop of the Mo-MPS was reduced by 0.11V~0.24V compared to that of the conventional MPS rectifier. Accordingly, since the Power dissipation of a rectifier mostly depends on the forward current density and forward voltage drop, the Mo-MPS rectifier achieved improved power dissipation when compared to the conventional MPS rectifier. The reverse breakdown voltage of a Mo-MPS rectifier with 68% Schottky junction area was about 304y. Despite having a lower forward voltage drop than a conventional MPS rectifier, the Mo-MPS rectifier still exhibited a higher reverse breakdown voltage.

Driving Characteristics Improvement of Brushless DC Motor by Commutation Angle Control (정류각 제어에 의한 무정류자 직류 전동기의 운전특성 개선)

  • 우광준;장석구;이현창
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.4 no.3
    • /
    • pp.50-58
    • /
    • 1990
  • Sinusoidal구동형 무정류자 직류 전동기에 비하여 콘트롤러의 제작 비용이 저렴하고, 토-크가 상대적으로 큰 Trapezoidal 구동형 무정류자 직류 전동기의 정류각을 마이크로프로세서에 의하여, 최대 토-크가 발생할 수 있도록 최적제어하는 시스템을 설계, 제작하여 실험하였다. 실험결과 정류각을 전진 시키지 않은 경우에 비하여, 예로서 1000rpm에서 약 265%의 토-크가 발생된 것과 같이, 전 운전구간에서 토-크가 크게 향상되고, 운전범위가 확대됨을 확인할수 있었다.

  • PDF

Sol-Gel법을 이용한 YZO/Si 이종접합 구조의 제작과 정류특성

  • Heo, Seong-Eun;Kim, Won-Jun;Kim, Chang-Min;Lee, Hwang-Ho;Lee, Byeong-Ho;Lee, Yeong-Min;Kim, Deuk-Yeong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.350-350
    • /
    • 2013
  • Sol-gel법을 이용하여 p-Si 기판위에 yttrium이 도핑된 ZnO (YZO)를 성장하였다. ZnO의 precursor로는 zinc acetate dihydrate를, yttrium의 source로는 yttrium acetate hydrate를 사용하였으며, 용매와 안정제로는 각각 2-methoxy ethanol과 monoethanolamine (MEA)를 사용하였다. yttrium의 doping 농도에 따른 영향을 알아보기 위하여 1~4 at.%로 제작된 YZO sol을 각각 p-type Si 기판에 성장하였으며, 이 후 furnace를 이용하여 500oC에서 1시간 동안 열처리하였다. 성장된 YZO 박막의 표면과 두께를 SEM을 통하여 확인하였으며, XRD를 통한 구조적인 특성을 분석한 결과 모든 박막에서 뚜렷한 c-축 배양성을 갖는 ZnO (0002)피크를 확인하였다. Hall effect를 통하여 YZO는 모두 n-type 특성을 나타낸다는 것을 확인하였으며, 광학적인 특성은 PL을 통해서 분석하였다. n-YZO/p-Si 이종접합의 전류-전압 특성을 분석한 결과 뚜렷한 정류특성을 나타내었다.

  • PDF

Study on the Rectifier Circuits for Wireless Energy Transmission (무선 에너지 전송을 위한 정류회로에 관한 연구)

  • Shin, Doo-Soub;Seo, Chul-Hun
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.48 no.2
    • /
    • pp.90-94
    • /
    • 2011
  • In this paper, the energy transfer is associated with high frequency band and try to analysis the rectifier circuit structure and characteristics and find ways to maximum efficiency. Input signal at 13.56MHz is converted output DC signal with the experiments and measurements. Rectifier cirsuits can be divided into the half-wave, full-wave, bridge rectifier circuit. Research to the present with the passive components are carried out with a focus on efficiency improvements. Factors affecting the efficiency of rectification is dependent on the characteristics of the device. In this experiment, about 70% efficiency can be measured. By using an improved device for high efficiency could be obtained higher efficiency.

A study on the new high efficiency rectifier system (고효율 신형 정류시스템에 대한 고찰)

  • Kim, Gue-Hong;Jeong, Jae-Hoon;Cho, Man-Hyun;Ahn, Che-Hong
    • Proceedings of the KIEE Conference
    • /
    • 1999.07g
    • /
    • pp.3172-3174
    • /
    • 1999
  • 교환기나 전송장치 등 각종 통신설비에 전원을 공급하기 위해서 정류기, 축전지 및 발전기 등의 전원설비가 사용되고 있다. 이들 중에서도 정류기는 통신설비에 직류전원을 공급하기 때문에 다른 전원설비 보 다도 신뢰성 및 안정성이 확보된 장치로 인식되어 왔다. 그러나 현재 사내전화국에 설치 운용중인 정류기는 교환 기별로 종류가 다양하여 유지보수에 어려움이 내재하고 있을 뿐만 아니라 통신망의 광대역화, 대용량화에 대처가 곤란하며 정류기를 전력실 또는 통신실에 집중해서 설치 운용하는 집중공급방식으로는 축전지의 만충전이 곤란하다. 또한 현재의 이러한 급전방식은 통신장치의 광대역화, 고도화 등 통신망의 급격한 발전과 함께 다음과 같은 문제점이 대두되고 있다. 첫째, 전력실에서 총괄하여 교류전력을 직류48V로 변환해서 급전하기 때문에 급전전류가 크게되고, 또한 전력실에서 통신실까지의 급전손실이 크다 둘째, 통신설비의 증감에 따른 전원설비의 증감이 어렵기 때문에 설비 가동율이 나쁘다 셋째, 전원설비의 고장에 의한 전화국 전체설비에 심각한 영향을 미칠수 있다 이러한 문제점을 해소하기 위하여 집중 및 분산급전방식으로 운용이 가능하며, 또한 모든 전원설비를 감시/제어하는 전원 집중관리 시스템과의 인터페이스 등이 가능한 정류시스템을 1997년부터 개발하였다. 본고에서는 신형 정류기와 기존의 정류기와의 성능 및 특성에 대해 비교하였고, 특히 경제성측면과 설치상련에 대해 비교분석 하였다. 또한 집중급전방식과 분산급전방식의 특성에 대해서도 서술하였다.

  • PDF

Design of an NMOS Current-Mirror Type Bridge Rectifier for driving RFID chips (RFID 칩 구동을 위한 NMOS 전류미러형 브리지 정류기의 설계)

  • Park, Kwang-Min;Hur, Myung-Joon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.9 no.2
    • /
    • pp.333-338
    • /
    • 2008
  • In this paper, a new NMOS current-mirror type bridge rectifier for driving RFID chips, whose minimum input voltage required to obtain the effective DC output voltage is low enough and whose power dissipation can be reduced than that of conventional one, is proposed. The designed rectifier is able to supply high enough and well-rectified DC voltages to drive RFID transponder chips for the frequency range of 13.56 MHz HF(for ISO 18000-3), 915 MHz UHF(fur ISO 18000-6), and 2.45 GHz microwave(for ISO 18000-4). Output characteristics of the proposed rectifier are analyzed with the high frequency equivalent circuit. And the circuitry method for effective reducing of the gate leakage current due to the increasing of operating frequency is also proposed theoretically. Using this method, the power consumption of $100\;{\mu}W$ and the DC output voltage of 2.13V for 3V peak-to-peak input voltage and $45\;K{\Omega}$ load resistance are obtained. Compared to conventional one, the proposed rectifier operates in more stable and shows superior characteristics in UHF and microwave frequencies.

A Study on the Conversion Efficiency of Rectenna using Dual-Polarization and FSS Method (이중편파와 FSS를 적용한 정류안테나의 변환효율 분석에 관한 연구)

  • 윤동기;박양하;김관호;이영철
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.10 no.5
    • /
    • pp.747-756
    • /
    • 1999
  • In this paper, we analyzed microwave-DC conversion efficiency for the dual-polarization rectenna and antenna position changing. And then we analyzed and applied Square-Loop FSS structure for reducing the diode harmonic components as a rectifying circuit. The results of microwave-DC conversion efficiency for the each of designed dual-polarization rectenna has 69.1% with $360\Omega$ (dipole type) and 75.4% with $340\Omega$ (patch type) optimum load resistor. When the each of dual-polarization rectenna has a optimal load resistor, it's conversion efficiency shows of $\pm$20% in dipole type and $\pm$5% in patch type at $0~180^{\circ}$position. When applied Square-Loop FSS structure for Rectenna, Insertion loss was under 1 dB as the passband and over 20 dB as the stopband. The microwave -DC conversion efficiency was represented good properties of $\pm$2% variation.

  • PDF