• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.187-193
• /
• 2002

Since the bus is regarded as the one of the most public transportation systems, research on the safety and facilities of the bus has been increased actively in recent years. In this paper, we concern the design of the bus door mechanism that is composed of many linkages and actuators(or motors). In particular, the folding door mechanism is representative system installed in most of urban buses. To design the folding door mechanism, we construct the kinematic and dynamic analysis model fur computer simulation. Also, the dynamic analysis is accomplished by both direct dynamics and inverse dynamics. Since the folding door mechanism has many design variables, the analysis program is developed to perceive kinematic and dynamic characteristics according to the design variables and simulation conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1383-1384
• /
• 2010

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.5
• /
• pp.155-163
• /
• 2008

This study investigated biomechanical response through the 3-dimensional virtual skeletal model developed and validated. Ten male subjects in standing posture were exposed to whole body vibrations and measured acceleration on anatomical of interest (head, $7^{th}$ cervical, $10^{th}$ thoracic, $4^{th}$ lumbar, knee joint and bottom of the vibrator). Three dimensional virtual skeletal model and vibration machine were created by using BRG LifeMOD and MSC.ADAMS. The results of forward dynamic analysis were compared with results of experiment. The results showed that the accuracy of developed model was $73.2{\pm}19.2%$ for all conditions.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.70-77
• /
• 2019

This study presents the numerical investigation of the trajectory of rocket launched from a helicopter. The nonlinear mathematical model of armed configuration of UH-60 helicopter was developed while Hydra 70 unguided rocket was modeled to simulate the rocket behavior. The effects of various inflow models on the launched rocket trajectory are obtained. Similarly, rocket launch simulation was performed to determine the unsafe flight maneuver condition where the rocket trajectory is critically close to the helicopter main rotor tip path plane.

• Journal of the KSME
• /
• v.35 no.8
• /
• pp.698-708
• /
• 1995

충돌이란 두 개 이상의 물체가 특정한 상대 속도로 부\ulcorner칠 때 나타나는 현상으로서 준 정 적(quasi-static) 조건하에서 나타나는 현상과 크게 다음 두 가지 특징을 들 수 있다. 첫째, 관 성력이 매우 중요하다. 따라서 기본 역학 및 물리학 보존법칙에 기초를 둔 모든 지배 방정식에 이 영향을 반드시 포함시켜야 한다. 둘째, 응력파(stress wave)에 의한 재료의 변형을 들 수 있다. 이 응력파는 시간과 거리에 따라 급격히 감소되므로 대부분의 경우 국부적으로 많은 변형이 일 어난다. 충돌에 의하여 일어나는 재료의 변형 특성은 충돌 속도에 따라 매우 다르게 나타난다. 이러한 특징들을 표 1에 나타내었다. 이 글에서는 충돌 해석 프로그램의 특징과 구성을 소개하고 그중 엑스플리시트 유한요소방법을 사용한 금속 재료에 관련된 몇 가지 충돌현상의 해석 예를 소개하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.70-71
• /
• 2023

본 연구는 항만 내 LNG 벙커링 동시작업 안전성 평가의 일환이다. 본 연구의 목적은 CFD를 활용하여 제한수역에서 항행선박이 계류된 선박에 미치는 영향을 평가하는 것이다. 수치해석은 Star-CCM+를 활용하였으며, 수치 모델 검증을 위해 해석 결과는 공개된 실험 데이터와 비교하였다. 연구 결과로부터 항행선박과 계류선박 간의 상호작용을 평가하는 중요한 정보를 얻을 수 있었으며, 이는 LNG 벙커링의 안전성을 평가하는 데 활용될 수 있다. 향후 연구에는 다양한 시나리오에 대한 평가 및 STS(Ship-to-ship) LNG 벙커링 동시작업 안전성을 평가하기 위한 연구가 계획되어 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.6
• /
• pp.1308-1316
• /
• 2001

This paper described a numerical investigation performed to understand better the effects of flow parameters in an entrained flow combustor on the flow characteristics. The computational model was based on the gas phase Eulerian equations of mass, momentum and energy. The code was formulated with RNG $k-\varepsilon$ model for turbulent flow. The calculation parameters were the ratio of primary and secondary jet velocity and the height difference between primary and secondary jet As the secondary jet velocity increased, the upper recirculation 3one of the primary jet was strengthened. It was found that as the primary jet velocity increased, there was a critical jet Velocity at which the size of upper and lower recirculation zone was reversed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.935-941
• /
• 2006

The hysteretic behavior of steel structure under cyclic and dynami loading such as earthquake is different to that under static loading. Because structural steels on dynamic deformation is different to static deformation with respect with mechanical characteristics and stress-strain relationship. Therefore, to accurately predict the hysteretic behavior of steel structures such as circular steel columns under cyclic and dynamic loading, the difference of loading carrying capacity and deformation according to loading rate, assumed static and dynamic deformation state, must be investigated. In this study, numerical analyses of circular steel column using SM490 for change of loading rate and diameter-thickness ratio(D/t) were carried out by using three-dimensional elastic-plastic finite element analysis and dynamic cyclic plasticity model of SM490 developed by the authors. Characteristics of hysteretic behavior of circular steel column using SM490, load carrying capacity and energy dissipation ratio, were clarified by analysis results.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.605-611
• /
• 1999

Conventional methods for assessing remaining life of critical high temperature components in fossil power plants rely on nondestructive inspection practices and accompanying life analysis based on fracture mechanics By using these conventional methods. It has been difficult to perform uninterrupted in-service inspection for life prediction. Thus, efforts have been made for developing on-line remaining life monitoring systems employing information on the shape of structures, operating variables and material properties. In thus study, a software for on-line life monitoring system which performs real-time life evaluation of a high temperature system headers was developed. The software is capable of evaluating creep and fatigue life usage from the real-time stress data calculated by using temperatures/stress transfer Green functions derived in advance for the specific headers. The major benefits of the developed software life in determining future operating schedule, inspection interval, and replacement plan by monitoring real-time life usage based on prior operating history.

• Journal of Korea Water Resources Association
• /
• v.48 no.2
• /
• pp.91-103
• /
• 2015

This paper presents the systematic approach to positively skewed shape of instantaneous unit hydrograph (IUH), that is one of the universal features of hydrologic response function. To this end an analytical expression of statistical moments for IUH is derived within the framework of geomorphologic instantaneous unit hydrograph (GIUH) theory and quantified according to the concept of hydrodynamic, geomorphologic and kinematic heterogeneity. There is a big scale difference between hillslope and channel flow path system. Although the former has the much smaller level of scale its variation coefficient tends to be higher and coefficient of skewness has the different trend than the latter. The shape of IUH is likely to be much more affected by kinematic heterogeneity rather than hydrodynamic heterogeneity and its combined effect with geomorphologic heterogeneity is the major cause of skewing hydrologic response function. Statistical features of hillslope and channel flow path can be transferred into hydrologic response function in the form of dimensionless statistics and their relative importance forms the general shape of hydrologic response function.