• Korean Journal of Poultry Science
• /
• v.20 no.4
• /
• pp.197-201
• /
• 1993

The objective of this study was to investigate the effects of hatch and sex on the body weight and shank length of growing pheasant. Least squares means of body weight at the age of 0, 4, 8, 12, 16 and 20 wks were 17.9, 96.0, 296.4, 563.4, 709.0 and 757.4 g for female, and 18.3, 104.4, 349.1, 728.5, 1001.4 and 1101.6 g for male, respectively. The hatch effect on body weight was significant at the age of 4, 8, 12 and 16 wks (P＜0.05), but the effects on shank length were significant at the age of birth and 8 wks only. There was no significant hatch effect on both the body weight and shank length at the age of 20 wks(P＞0.05). Least squares mean differences between female and male were significant(P＜0.01) over all wks of age except at hatch.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.443-448
• /
• 2000

In this paper, multiphase optimization of machine structure is presented. The goal of first step is to obtain (i) light weight, (ii) rigidity statically. In this step, multiple optimization problem with two objective functions is treated using Pareto Genetic Algorithm. Where two objective functions are weight of the structure, and static compliance. The method is applied to a new machine structure design.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.10a
• /
• pp.175-176
• /
• 2010

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2015.10a
• /
• pp.185-186
• /
• 2015

• Korean Journal of Poultry Science
• /
• v.31 no.3
• /
• pp.157-164
• /
• 2004

The objective of this study was to investigate the association of growth rate with body weight or shank length at birth in broiler chickens. Cobb and Ross breeds were used as experimental stocks and four groups were assigned in each breed; thirteen-male and twelve-female chicks(25 birds) were allocated in each group. The heavier body weight group(HBW) and the lighter body weight group(LBW) were established by birth weight. Whereas, the longer shank length group(LSL) and the shorter shank length group(SSL) were established by shank length at birth. The heavier group chicks in birth weight were significantly(P < 0.05) the longer in shank length at birth. The differences between HBW and LSL or between LBW and SSL in the mean 5-wk body weight of Cobb were not significantly different in each other; however, HBW and LSL were significantly(P < 0.05) heavier than LBW or SSL. Whereas, there were no significant differences in the mean 5-wk body weight of Ross although HBW was heavier by 13.1 g than LBW and LSL was heavier by 68.0 g than SSL. In the mean 5-wk shank length, the LSL of Cobb and Ross was longer by 2.9 mm and 1.3 mm than SSL, respectively; however, the significant(P < 0.05) difference was showed in Cobb only. In both breeds, the differences in the mean 5-wk shank length between HBW and LBW were not great. By the results of correlation analysis, the associations of the overall mean birth weights with the overall mean shank length at birth or the association of the 0～5 wk growth rate with the change of shank length during 0～5 wk showed highly significant(P < 0.01～0.001) in both breeds. The present study suggested that the selection based on birth weight could be at advantage due to easier and more accurate tool in using for the improvement growth rate in broiler chickens because the measurement of shank length takes individually longer and less accurate than the measurement of body weight.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.129-137
• /
• 2002

Elastomers, which are used engine mounts and body mount rubbers, are traditionally designed for NVH use in vehicles, and for vibration isolation in specific frequency range. According to the measurement of the characteristics of the SUV's engine mounts, there are variability in same engine mount properties. Static and dynamic stiffness of the SUV's engine mounts are changed due to the driving miles accumulated. The pre-load of body mount rubbers are changed due to the empty vehicle weight, passenger's weight and gross vehicle weight. And the dynamic stiffness of body mount rubbers are changed very hard above 150Hz frequency range.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.75-78
• /
• 2005

In this paper, an experimental study on porous air bearing stiffness for ultra precision positioning system was performed. In general manufacturer provide bearing stiffness under specific air pressure, but the air pressure used in the field is different. Therefore it is necessary to know the stiffness of air bearing under the pressure used in the field. In order to know that, experimental device which can realize actual operating conditions was made. Using this device, static and dynamic stiffness of air bearing can be obtained. As a result, displacement error occurred around 1 $\mu$m at recommended load.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.118-119
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.608-609
• /
• 2010

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.9 no.1
• /
• pp.17-23
• /
• 2009

배경: 보툴리눔 독소 A형은 강직성 질환을 비롯한 여러 질환의 치료제로 널리 사용되고 있다. 최근에 보툴리눔 독소 A형은 근육비대를 치료하기 위해 널리 이용되고 있다. 하지만 보툴리눔 독소의 근육비대의 치료효과에 대해서 알려진 바가 거의 없다. 본 연구는 토끼 정강뼈 근육에 보툴리눔 A, B형을 주입 후 시간경과에 따른 근육의 위축을 확인하여 근육비대의 치료에 보툴리눔 B형이 효과적인지 확인하고자 하였다. 방법: 36마리의 토끼를 4그룹으로 분류하였다(1 그룹: 생리식염수 주사: 2 그룹: 보툴리눔 독소 A, B - 2U, 3 그룹: 보툴리눔 독소 A, B - 5U, 4 그룹: 보툴리눔 독소 A, B - 10U). 정강뼈근육에 보툴리눔 독소 A, B형을 주입 후 1, 2, 4주에 정강뼈 근육의 부피를 측정하였다. 신경자극기를 이용하여 독소 주입 후 1, 2, 4주의 근육의 단일 수축을 확인하여 근육기능의 변화여부를 확인하였다. 결과: 보툴리눔 독소 B형을 주입시 통계적으로 유의하지 않지만 A형에 비해 근육 부피의 감소가 관찰되었다(P>0.05). 반면, 근육의 단일 수축은 보툴리눔의 용량에 관계없이 B형을 주입한 근육에서 더 높게 관찰 되었다. 결론: 보툴리눔 독소 B형을 주입한 경우 근육 기능의 회복속도는 빠른 반면 근육의 위축은 A형에 비해 더 오랫동안 지속되었다. 따라서 근육비대의 치료에 있어 보툴리눔 독소 B형이 A형보다 보다 더 효과적이라고 사료된다.