• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.38-43
• /
• 2001

The interfacial adhesive joining characteristics of the foams are very important for the structural integrity of sandwich structures. Peel strength is one of the best criteria for the interfacial characteristics of the sandwich structures and peel energy is most commonly used for the interfacial characteristics. The peel strength is the first peak force per unit width of bond line required to produce progressive separation by the wedge or other crack opening type action of two adherends where one or both undergo significant bending and the peel energy is the surface active energy per unit width of bond line. In this work, to investigate the strengthening effect of resin treatment on the interfacial surface of foam material, peel strength and peel energy of epoxy resin treated polyurethane foam core sandwich structures were obtained by the cleavage peel tests and compared with those of non surface treated polyurethane foam core sandwich structures.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.470-474
• /
• 1997

Since the ceramic/metal joints is joined at high temperature, the residual stress will develop during when cooled from bonding temperature due to remarkable difference of thermal expansion coefficient between creamic and metal. Moreover, the edge of jointed interface makes singular stress field in the ceramic/metal joints and this singular stress field much influences on the strength of joints. In this study, The influence of residual stress, mechanical load and repeat thermal sysle was estimated in the ceramic/metal joints. According to this influence, the change of singular stress field was analyed and then strength test, X-ray measurement are performed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.752-754
• /
• 1997

The stress intensity factor for an interface crack in dissimilar materials has been obtained by many researchers. But research of the energy release rate for an interface crack in pseudo-isotropic dissimilar materials is insufficient yet. In this paper, the energy release rate for cracks in pseudo-isotropic dissimilar materials was obtained using eigenfunction expansion method and also analyzed numerically using the reciprocal work contour integral method. The results were verified by comparing with other worker's results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.11a
• /
• pp.33-41
• /
• 2002

In case of hollow cylinder extrusion using porthole die, the effects of extrusion parameters-temperature, the speed of extrusion, the shape of the die and mandrel-on metal flow in porthole die extrusion of aluminum have been investigated. However, there have been few studies about condenser tube extruded by porthole die. This study was designed to evaluate metal flow, welding pressure, extrusion load, tendency of mandrel deflection according to variation of chamber length. in porthole die. Estimation was carried out using finite element method. Porthole die is analyzed in as non-steady state. Analytical results provide useful information the optimal design of porthole die.

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.1-11
• /
• 1997

용접이음부에서는 피로크랙 전파거동이 모재와 다르다는 것은 이미 알려져 있으며 그 원인으로서는 용접부에 있어서의 금속조직의 변화와 잔류응력 등이 일컬어 진다. 금속조직의 변화에 따른 영향에 대하여서는 비교적 그 영향이 작으며 또한 피로 크랙 전파속도에 대해서 안전한 쪽으로 역할을 한다고 보고되어져 있다. 따라서 용접 이음부에 있어서의 피로크랙 전파에 대하여서는 주로 잔류 응력의 영향에 주목하여, 잔류응력이 피로크랙의 전파속도에 어떻게 영향을 미치는가를 파악하여야 한다. 이러 한 관점에서 지금까지 용접잔류응력장을 전파하는 피로크랙을 대상으로 하여 잔류응력 이 피로크랙 전파에 미치는 영향을 정량적으로 평가하고자 하느 시도가 많은 연구진에 의해 수행되어 왔다. 표1에 이러한 연구의 흐름을 평가방법과 평가에 고려된 사항을 중심으로 나타내었다. 이러한 배경으로부터, 본고에서는 피로크랙 전파거동에 미치는 잔류응력의 영향에 대해서 지금까지 수행된 연구의 내용을 연구 발전형태에 주목하여 검토하였다.

• Journal of Welding and Joining
• /
• v.13 no.3
• /
• pp.34-45
• /
• 1995

9%Ni강은 1944년 미국의 INCO(International Nickel Co., Ltd.)에 의해 최초 로 개발된 강도가 높고 용접성이 우수한 강제로서, 특히 극저온에서의 충격 인성이 우수하고 경제적으로도 유리하여 LNG 탱크 소재로서 사용한 실적이 많으며, 그동안 일본이 주축이 되어 강재의 품질개선 및 고능률.고품질의 용접기술 개발 등을 비롯 하여 탱크의 대형화 추세에 따른 안전성 확보를 위한 연구도 계속되고 있다. 이러한 추세에 동참하여 우리나라도 1993년 국산의 9%Ni강을 성공적으로 개발하게 되었고, 그 품질특성에 대해서도 국내외에 발표되었으나 여건이 미비하여 현재 국내에서 건설 중인 탱크의 소재로서는 공급되지 못하였다. 그러나 최근에 개발된 국산 강제는 자체 시험결과 뿐 아니라 외국 유수 연구기관의 시험결과에서도 각종 품질특성이 선진 제품 과 동등 이상으로 우수함이 입증되어, 가까운 장래 건설예정인 국내공사에는 물론 해외에서도 사용될 것으로 기대되고 있다. 따라서 본 해설은 향후 국내외의 LNG 수요 를 고려할 때 대형 저장탱크의 건설이 활발해 질 것으로 전망됨에 따라 9%Ni강의 현황 과 함께 최근 개발된 국산 강재의 용접특성에 대하여 소개하고자 한다.

• Journal of Welding and Joining
• /
• v.12 no.4
• /
• pp.151-161
• /
• 1994

FCAW has wide application in ship fabrication, maintenance and field erection. It has many advantages over SMAW.SAW and GMAW process. In many applications, the FCAW provides highquality weld metal. This method can reduce weld defects especially porosity and spatter. But the fatigue characteristics of those deposited metal have been rarely investigated. The purpose of this study is to investigate the cyclic stress-strain behavior and fatigue tests by the constant strain control were carried out on the rounded smooth specimen with deposited metal using the metal type flux cored wire. As the results of this study for the deposited metal welded by the metal type flux cored wire, the hardening or softening characteristics under cyclic load were investigated and cyclic stress-strain curve, strain-fatigue life curve, stress-strain function and fatigue life relation which are useful to estimate the fatigue life under the stress concentration condition were obtained.

• Journal of Welding and Joining
• /
• v.27 no.1
• /
• pp.90-94
• /
• 2009

In this study, a series of fatigue test was performed to evaluate the fatigue strength of butt welded specimens. Effective notch stress through finite element analysis was conducted to analyze the fatigue results. As a results, no significant decrease in fatigue strength was observed when backplates were present. The S-N curve that based on effective notch stress appeared a similar fatigue lift to FAT 225 curve without reference to existence of backplates.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.217-222
• /
• 2000

A large Pc structure building is system that consisted of bearing wall and slab joint. It has general structure stability from unity thar each members tied at joint. The strength of mortar that packing in joint among panels is important to internal force in entire building system. Do, if we could get early strength estimation with microwave. It would bring good construction planning, reduce construction time, and judge building stability and so on. The purpose of this study is to develop early estimation method for making better quality control and constructing good PC panel structure. The results of this study were as follows :1) With sealed molds, reduced moisture volatilization to more than 60% and enlarged 30% accelerated compressive strength than before one. 2) To get more accelerated strength, we should control maximum temperature difference to $30^{\circ}C$ downward 3)Interrelation with 7-day and 28-day strength were 0.831,0.902, and it is above than before one

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.7-12
• /
• 2009

The tensile and fatigue experiments were conducted with tensile-peel specimens for investigating on strength of adhesively bonded and mechanical press joints of aluminum sheet used in the field of the automobile industry. The combining epoxy adhesive bonding and mechanical press joining exhibits an increase in joining force as a result of interaction between static forces of the two joining methods. The fatigue strength of pure adhesive joint was measured as 91% of that of the combination of adhesive bond and mechanical press joint, suggesting that the interaction between the bonding and mechanical joining was about 9%.