• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.61-66
• /
• 1999

반복 응력 상태 아래서 알루미나 세라믹의 피로 표면손상 누적현상이 분석되었다. 연속 미끄럼 접촉 시에 발생하는 응력 상태를 재현하기 위해서 동시에 작용하는 수직-수평 반복 압축하중 기법이 사용되었다. 알루미나 구와 평판의 접촉면에서 알루미나 미세 결정의 피로 파손에 의한 마모 입자 형성 기구가 관찰되었고, 반복하중의 횟수와 수직-수평 하중비가 커질수록 마모량은 증가하였다. 반복 접촉하중에 의한 표면손상 누적이 접촉 수직 변위 측정으로 정량화 되었다. 두 접촉 구조물의 강성 (하중-변위 선도의 기울기) 변화가 두 재질의 탄성계수의 변화로 표현되었다.

• Composites Research
• /
• v.35 no.2
• /
• pp.80-85
• /
• 2022

This work presents an experiment study to evaluate the nanoparticle adhesion and surface hydrophobicity characteristics of Teflon-polyurethane top coat depending on the number of multi-wall carbon nanotube (MWCNT) coatings, which is a carbon-based hydrophobic particle. In order to measure the adhesion between the nanoparticles and the top coat, adhesion pull-off test was performed with different MWCNT oxidation times. Static contact angle and roughness measurements were carried out to characterize the surface hydrophobic behavior. Through the roughness evaluation, it was confirmed that the carbon nanotubes were wetted in the Teflon-polyurethane top coat, and the degree carbon nanotube wetting was confirmed through a USB-microscope. As a result, it was found that the larger the degree of wetting, the better the adhesion. From the experimental results, as the hydrophobicity of Teflon-polyurethane increased, the adhesive propertydecreased with the number of coatings. It was possible to improve the adhesive force and determine the number of coatings of carbon nanotubes with optimized hydrophobicity.

• KSBB Journal
• /
• v.8 no.1
• /
• pp.83-88
• /
• 1993

Lipase was separated using reverse mlcelles in a spray column. The 50 mM AOT-Isooctane solution was used as reverse micellar solution for the extraction of lipase (crude containing 25% Protein). Ionic strength was controlled by KCl(0.1M KCl for extraction, 0.5M KCl for back exlractlon). Acetate buffer and phosphate buffer were used for control of pH. The efficiencies of extraction and stripping were 30% and 50%. An increase of circulation did not change the efficiency of extraction in forward extraction. The optimum flow rate was around 0.10ml/sec.

• 가정의 벗
• /
• v.37 no.10 s.434
• /
• pp.8-9
• /
• 2004

평생 감기에 걸리지 않고 사는 것은 불가능합니다. 하지만 적절한 조치를 취하면 감기에 걸리는 횟수를 줄일 수 있습니다. 아기의 나이가 어릴수록 타인에 대한 접촉을 줄이고 아기를 돌볼 때 손을 자주 씻는 것은 아기가 덜 아프고, 건강하게 잘 자라는데 많은 도움이 됩니다.

• Journal of Life Science
• /
• v.32 no.10
• /
• pp.821-831
• /
• 2022

This study evaluated the effects of physical touch play programs in children through a systematic literature review and meta-analysis. A literature search for journal articles published before August 2022 was conducted using KERIS, KISS, DBpia, and ScienceON. The keywords used for the search were 'child', 'infant', 'physical touch', 'physical touch play', 'physical touch activities' and 'physical touch play program'. For the study's purpose, seven studies were selected through a systematic process of using several databases and were used to estimate the effect size of physical touch play programs. A meta-analysis was performed using a random effects model, and the effect size on cognitive function was calculated. Hedges' g of the physical touch play program was 6.20 (95% CI: 3.74-8.66), indicating a large effect size. To determine heterogeneity (I2= 95.4%, Q = 417.30, p<0.001), moderator analysis was performed using the total number of times and intervention duration. The total number of times was statistically significant; the other moderators did not differ significantly. This study systematically analyzed the results of physical touch play programs on children in Korea. It also provides insights that can be applied to the design of physical touch play programs for children. To present more evidence that supports the effectiveness of physical touch programs, further research is warranted.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.184-189
• /
• 2002

기계부품 및 구조물의 상호접촉면이 미소변위에 의해 상대운동을 할 때 접촉면에서는 마모가 발생하고 이러한 마모현상은 당해 구조물의 안전성을 심각하게 위협하는 결과를 초래하게 된다. 이러한 마모 현상에 대한 근래의 연구동향으로는 $Engel^{(1.2)}$ 이 충격(impact)에 의한 마모에 대해, 그리고 $Waterhouse^{(3)}$ 는 미끄럼(sliding) 마모에 대해 연구한 바 있다. 원자력발전소의 증기발생기(steam generator) 내에서 1차측의 세관(tube)과 2차측에 속하는 지지물(supporter) 또는 방진대(antivibration band) 사이에서 세관의 진동으로 인해 지지물과 충돌을 일으키고 충돌 횟수가 누적되면 세관의 마모로 이어져 결국 세관의 건전성은 침해받게 된다.(중략)

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.512-520
• /
• 2017

On a typical railway, trains travel using the friction between the wheel and the rail. Contact pressure is generated between the wheel and the rail, and the magnitude of the contact pressure changes depending on the weight, speed, wheel-set hunting, and contact point of the vehicle. In this study, the contact characteristics were analyzed through the finite element analysis for the wheel/rail system on curved track, and fatigue damage and wear rate of wheel/rail according to contact pressure were analyzed through rolling contact fatigue test. Results indicate that, general and heat treated rails showed higher wear rate than wheels, and general and heat treated rail wear rate increased rapidly over a certain number of repetitions. In addition, the general rail wear rate was about 7 ~ 15% higher than that of the heat treated rail, and a regression equation for the rail wear rate with the contact pressure in the contact pressure range of 900 ~ 1,500 MPa was presented.

• Food Science and Preservation
• /
• v.20 no.2
• /
• pp.250-256
• /
• 2013

To verify the multiplication of microorganisms on the surface of strawberries, the fate of E. coli $DH5{\alpha}::gfp$ at different temperatures, times and strawberry extract concentrations were measured. The population of E. coli $DH5{\alpha}::gfp$ rapidly increased by 7.36~7.78 log CFU/g at $25{\sim}30^{\circ}C$ for 24 hr and slowly increased by 6.49~8.49 log CFU/g at $10{\sim}20^{\circ}C$ for 48 hr. However, E. coli $DH5{\alpha}::gfp$ did not grow at $10{\sim}15^{\circ}C$ on the surface of the strawberries, regardless of the contact times with the bacterial suspension. E. coli $DH5{\alpha}::gfp$ reached 1.52~3.26 log CFU/g at $20^{\circ}C$ as the contact frequency increased from two to six times. The contact frequencies did not significantly differ. In the case of the six-time contact on the surface of the strawberry at 25 and $30^{\circ}C$, the E. coli $DH5{\alpha}::gfp$ increased by 5.17 and 5.01 log CFU/g. The effects of the strawberry extracts on the growth of E. coli $DH5{\alpha}::gfp$ showed that sterilization and non-sterilization do not affect the growth of microorganisms for 96 hr. In the minimal broth, the growth of E. coli $DH5{\alpha}::gfp$ increased by 1 log CFU/g for 96 hr. In less than 50 percent of the strawberry extracts, the growth rate of E. coli $DH5{\alpha}::gfp$ was higher than in the control and increased by 4 and 5 log CFU/g at 50 and 25 percent of strawberry extracts, respectively. Therefore, E. coli $DH5{\alpha}::gfp$ can multiply and survive on the surface of strawberries when it comes into contact with the fruit extract.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.211-216
• /
• 2006

Dynamic analysis of a marine slender structure is often involved with contacts among bodies or between bodies and seafloor. This paper presents an efficient and general contact search algorithm for dynamics in the context of the compliance contact model. A global detecting method that a bounding box is divided into several pieces in global coordinate system is presented in this paper. The method has an advantage that the number of contacting searching can be smaller than other methods for a system. The developed an efficient contact search algorithm is applied to the simulation program of 3D nonlinear dynamics of slender structure. Some examples are presented to show the validity of the proposed method.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.15-20
• /
• 2007

Dynamic analysis of a marine slender structure is often involved with contacts among bodies or between bodies and seafloor. This paper presents an efficient and general contact search algorithm for dynamics in the context of the compliance contact model. A global detecting method that a bounding box is divided into several pieces in global coordinate system is presented in this paper. The method has an advantage that the number of contacting searching am be smaller than other methods for a system. The developed an efficient contact search algorithm is applied to the simulation program of 3D nonlinear dynamics of slender structure. Some examples are presented to show the validity of the proposed method.