• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.56-56
• /
• 2003

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.40-46
• /
• 2011

In the field application of the conventional acoustic nonlinear technique using through transmission of bulk waves to evaluate the contact acoustic nonlinearity(CAN) in solid-solid contact interfaces like as in the closed crack, it has difficulty to access inner position for attaching the pulsing or receiving transducer. In the present study, a new reflection technique has been suggested to measure the acoustic nonlinearity in solid-solid contact interfaces, which uses both of pulsing and receiving transducers on the same side of target and so that it will be very useful for the field application. For this, based on the linear and the nonlinear contact stiffness estimated by the power-model of the contacting pressure, the nonlinear parameter of the reflected ultrasonic wave at the interfaces has been theoretically calculated. Experimental results in contact interfaces of A1606l-T6 alloy specimens with loading pressure showed good agreement with the theoretical predictions, which proves the validity of the suggested reflection mode technique.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.51-55
• /
• 2014

This paper was analyzed for a sealing characteristics of single lip contact type o-ring and multiple lip contact type packing for a swivel joint using the finite element method. According to the FE analysis, a conventional o-ring produces a maximum contact normal stress of 2.5MPa for a supplied LP gas pressure of 1.8MPa, which is related to the sealing performance. But, a sealing performance of newly invented multi-lip packing produces a maximum contact normal stress of 3.01MPa, which is 20.4% higher than that of a conventional o-ring. And an extrusion of a conventional o-ring, which is strongly related to the sealing endurance safety, was occurred at a supplied gas pressure of 1.62MPa. But, a multi-lip packing does not produce up to the gas pressure of 1.8MPa. This means that a new type of multi-lip packing may have excellent sealing characteristics because of no extrusion for high gas pressure. Thus, multi-lip packing with multiple lip contacts may be useful for high sealing and endurance safety compared to that of the conventional o-ring with a single lip contact.

• Elastomers and Composites
• /
• v.35 no.1
• /
• pp.4-11
• /
• 2000

A rubber diaphragm is a critical element of accumulators. The material of a diaphragm is nitrile rubber so as to recover and adjust the large deformation under external pressure fluctuation. The performance of accumulators is influenced by the deformation behaviors of the diaphragm. A large deformation behavior of the diaphragm has been investigated using the commercial finite element program MARC K7.1. The several elastic moduli have been used in linear analysis and Ogden's coefficients have been used in non-linear analysis. As a result, it has been shown that the deformation behavior with a elastic modulus of $0.3 kg/mm^2$ is similar to the behavior of non-linear analysis. And, the modified diaphragm shape to reduce the stress concentration has been proposed.

• Membrane Journal
• /
• v.25 no.4
• /
• pp.367-372
• /
• 2015

In pressure-retarded osmosis (PRO) and forward osmosis (FO) processes, solvent (permeate) flux depends on which surface the draw solution faces. There are two operation modes. PRO mode indicates that the active layer faces the draw solution, and FO mode means that the porous substrate fronts the draw stream. It is often observed that the PRO mode produces higher flux than that of FO under the same operating conditions. The current work uses the method of proof by contradiction, and mathematically proves the intrinsic flux inequality between the two modes.

• Journal of the KSME
• /
• v.17 no.3
• /
• pp.153-158
• /
• 1977

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.664_665
• /
• 2009

초음파모터의 동작은 기본적으로 기계적인 마찰에 의지하기 때문에, 이를 해석하기 위해서는 복잡하고 비선형적인 접촉 메커니즘에 대한 고찰이 필요하다. 본 논문에서는 타원형 접촉면 모델을 이용하여 이러한 접촉 메커니즘을 설명하고, 또한 회전자가 가하는 압력에 의해 발생하는 고정자의 변형도 고려하는 회전형 초음파 모터의 해석법을 제시한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.358-363
• /
• 2008

Ultrasonic nonlinearity has been considered as a promising method to evaluate the micro damage of material; however, its magnitude is so small that its measurement is not easy. Thus, in this study, we investigate the effects of such experimental system dependent factors in the measurement of ultrasonic nonlinear parameter by using contact PZT transducer. Experimental results showed that the effect of system dependent nonlinearity is reduced when the contact pressure and transducer input voltage are sufficiently large. These results will be very useful to find out the proper experiment condition to measure rather accurate nonlinear parameter.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1118-1127
• /
• 1989

본 연구에서는 두 치차사이의 접촉 문제를 해석하기 위하여 마찰을 고려한 수직 하중과 접선 하중이 동시에 작용하는 경우에서의 접촉 문제를 수식화하였다. 그리고 두개의 원통의 접촉으로 가정함이 없이 실제적인 인벌루우트 곡면간의 접촉 문제를 해석하기 위하여 유한 요소법을 사용하였으며 비선형 연립 방정식으로 수식화된 된 접촉 문제를 효과적으로 풀기 위하여 최적화 기법을 이용한 산법을 제시하였다. 이때 마찰을 고려한 치차의 접촉 문제 해석에 필요한 수직 압력 분포는 이 등에 의하여 이루어진 결과를 이용하였다. 제시한 산법에 의하여 마찰을 고려한 두 치차의 접촉 문제를 해석하여 치차 손상의 중요한 원인중의 하나인 피팅(pitting) 현상을 유발하는 실제적인 조건을 고려함으로써 자동화 및 정밀화 되어가는 기계의 중요한 부품으로서 치차의 정밀 설계를 하기 위한 정확한 자료를 제시하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1992

A method analizing contact pressure between plate and elastic half space is presented by using F.E.M. With the method, the pressure intensities at surface nodes of half space cae be directly calculated by using flexibility matrix of half space. The method is originally presented by Y.K. Cheung et al.(3) Insted of Y.K. Cheung's method, which use a conception of equi-contact pressure area around each surface nodes of half space in the noded rectanqular element area. We use the equi-contact pressure area around the Gaussian integration points of half space surface in the noded isoparametric element area. Numarical examples are presented and compared with other's studies.