• Journal of Sensor Science and Technology
• /
• v.3 no.1
• /
• pp.32-39
• /
• 1994

Catalytic combustion type sensor was fabricated for alcohol detection, and its characteristics were tested. When the resistance of Pt coil for pellistor is 2.0 ohm, suggestible input power to bridge circuit was about 300 mW for methanol detection, and in the range from 350 mW to 400 mW for ethanol. Pellistors were prepared by means of impregnating Pt or Pd on the ${\gamma}$-alumina bead for sensing element, and transition metals such as $Co_{3}O_{4}$, $Fe_{2}O_{3}$ for compensating element.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.23-29
• /
• 2012

Injured peoples usually care their body at medical institutions. But if they need some more rehabilitation to the affected area thus exist. These medical institutions according to the scale there are significant differences in rehabilitation programs, most of the small-scale rehabilitation program for medical doctors and patients to be progression of the conversation is an issue. In this paper, in a small medical facility rehabilitation to assist in the accuracy and reliability, physical contact and force sensors that can measure a combination of substitution and the tactile sensor and tactile sensor alternative with a similar function is proposed. Perceptron neural networks by applying the contact evaluation according to the algorithm to determine the pattern is applied.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.113-121
• /
• 2013

The road icing forecast and snow detection system using state evaluation algorithm of multi sensor optimizes snow melting system to control spread time and amount of chemical spread application This system operates integrated of contact/non-contact sensor and infrared camera. The state evaluation algorithm of the system evaluates road freezing danger condition and snowfall condition (snowfall intensity also) using acquired data such as temperature/humidity, moisture detection and result of image signal processing from field video footage. In the field experiment, it proved excellent and reliable evaluated result of snowfall state detection rate of 89% and wet state detection rate of 94%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.639-646
• /
• 2016

In this study, the contactless measurement method with a optical displacement sensor(ODS, ADNS 9500) was proposed to overcome flaws in a rotary encoder based measurement under particular circumstances, such as a slippage and a case of little rotational inertia. The performance tests of the optical displacement sensor using data acquisition board and National Instruments's LabVIEW program were performed to accomplish accurate displacement measurements and the performance characteristics according to measurement direction, speed, acceleration, height and surface types were discovered through the repetitive tests. The experimental results indicate that, in order to get an accurate in-plane motion, the height(distance between the ODS and the target surface) has to be maintained at the range of 2.4 mm to 3.2 mm and the sensitivity(resolution) should be modified and applied to the formulae for displacement calculation, considering its measurement direction, speed and surface type.

• Journal of Sensor Science and Technology
• /
• v.5 no.2
• /
• pp.37-46
• /
• 1996

This paper describes a system that can be used to recognize unknown materials regardless of the change in ambient temperature by using temperature response curve fitting and fuzzy neural network(FNN). There are problems with a recognition system which utilize temperature responses. It requires too many memories to store the vast temperature response data and it has to be filtered to remove the noise which occurs in experiments. Thus, this paper proposes a practical method using curve fitting to remove the above problems of memories and noise. Also, the FNN is proposed to overcome the problem caused by the change of ambient temperature. Using the FNN which is learned by temperature responses on fixed ambient temperatures and known thermal conductivity, the thermal conductivity of the material can be inferred on various ambient temperatures. So the material can be recognized via its thermal conductivity.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.192-197
• /
• 2012

In this paper, a non-contact microwave technique was presented to detect the surface crack of the metals. An open-ended coaxial cable line was used as a sensor at 11 GHz, and the reflection coefficients were measured by scanning along the metal surface including artificial surface cracks. A parameter, the K value which was defined as the difference between maximum and minimum reflection coefficients, was measured and used to estimate the crack depth. A linear relationship between the K value and crack depth was found. This study showed that non-contact detection of the surface cracks of metals is possible using the open-ended coaxial line sensor at X-band.

• Tunnel and Underground Space
• /
• v.20 no.3
• /
• pp.207-216
• /
• 2010

Rockfall monitoring systems generally used in the country are mainly based on the detection of tension of protection wire or tilting of protection post due to rock fall. However, rock fall protection net must be installed prior to the monitoring system and continual maintenance work after each rock fall event is required for a normal operation of these detection systems. To solve these problems, we suggested and implemented a non-contact rock fall detection system using multiple photo sensors and additional camera. After a laboratory experiment and field application, we can conclude that this system is effective and reliable for detecting, collecting and analyzing the rock fall information. In addition, lighten and difference operations on two captured images were able to yield rough estimation of size and direction of rock fall.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.47-54
• /
• 2021

According to the Korea Occupational Safety and Health Agency's (KOSHA) report on industrial accident statistics over the past four years, the number of casualties at construction sites from 2017 to June 2020 was about 93,158 and the number of deaths was about 1,977, showing a high trend of safety accidents among the eight major occupational groups, with the construction industry ranking third in total and the death rate being the highest in total. Among them, the number of deaths caused by falls in the entire occupational category is about 1,267, the highest rate of deaths due to contact is about 522, which is a frequent safety accident among the top three accident types. This paper aims to help reduce the overall proportion of construction safety accidents by developing smart safety sensing devices using ultrasonic sensors to prevent two types of safety accidents, which have the highest rate of occurrence among various types of safety accidents occurring at construction sites.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.383-384
• /
• 2014

본 논문에서 제시된 배전 선로용 자계 검출 센서는 비접촉형이며, 페라이트 코어로 구성되어 있다. 시편 코어의 권선수 및 길이의 변화에 따른 특성을 조사한 결과 탐색 코일의 권선수가 5,000턴이고 이격 거리가 6[cm] 이내에서 활선 여부를 검출할 수 있었으며, 전선과의 이격 거리에 대해서 자계의 세기가 제곱에 반비례로 감소하는 것을 확인할 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.22-27
• /
• 1993

산업기술의 발달에 따라 각 분야마다 정밀한 부품을 요구하고 있다. 이는 이들 부품이 시스템의 성능에 영향을 미치고 있기 때문이다. 부품의 정도는 길이정도와 표면의 정도를 모두 의미한다. 길이정도는 부품의 상대적 크기정도를, 표면정도는 3차원 형상정도를 나타낸다. 이들 부품의 정도를 평가하기 위해서는 반드시 측정이라는 방법이 수행되어야 하며, 측정은 요구되는 측정정도에 따라 이에 상용되는 방법으로 행해지게 된다. 요구되는 측정정도는 시간이 지남에 따라 점차 증가되고 있다. 이 러한 경향은 그림1의 시대에 따른 측정정도를 보면 확인할 수 있다. 시대에 따라 측정정도는 급격히 증가하고 있고 현재의 측정은 초정밀측정이라 말하는 약 0.1nm의 정밀도를 갖고 있다. 측정정도에 따라 표면측정기술도 여러가지 방법이 행해지고 있는데 이들 측정방법은 크게 접촉식 측정방법과 비접촉 측정 방법으로 나눌 수 있다. 대표적인 접촉식 측정방법으로는 촉침식 측정방법을 들 수 있다. 이 방법은 다이아몬드 촉침을 표면상에 접촉하여 주사이동하게 하고 이때 표면의 요철에 따른 촉침의 상하운동을 고성능 변위센서를 이용하여 표면형상을 측정하는 것이다. 이는1nm의 수직분해능을 갖고 측정이 가능 하다. 이 방법은 표면에 접촉함으로 인해 신뢰성이 높지만, 표면의 접촉압력으로 인해 표면의 손상 우려가 있다. 이런 이유로 현재 비접촉 측정방법이 주목받고 있다. 표면측정을 실현하는 데에는 광학 기술이 적극적으로 활용되고 있으며, 최근에는 물리학의 원리들이 도입되고 있다. 본 글에서는 이러한 측정기술의 기본원리를 소개하고 각 기술이 응용되는 예를 소개하고자 한다.