• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.53-56
• /
• 1997

본 연구에서는 폴리에스테르와 실크 블라우스 직물 6종을 사용하여 직물에 대한 선호 감각을 분석하고, 이러한 감각 속성들을 정향화 하기 위한 직물의 물리적 요소들을 규명하고자 하였다. 선행연구에서 추출된 감각들이 어떤 인과관계의 경로를 거쳐 최종 선호감성에 영향을 주는지 파악하기 위해 감각의 구성차원 모형을 검증하였다. 고온 다습한 환경에서 선호감각이 촉감에 영향을 받으며 촉감은 직물의 표면특성감과 습윤감이 중요한 1차적 감각이었다. 태는 유연감에 영향을 받는 복합적 감각이었으나 최종 구매시 선호감에는 유의한 영향을 미치지 않았다. 관련 표면 불성 변인으로는 영상처리를 통한 fractal차원과 총접촉면적이 SMD, MIU 및 MMD보다 더 높은 상관을 나타내었다.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.297-301
• /
• 2004

세탁기의 Shaft Ass'y는 모터로부터 동력을 전달 받아 세탁 및 탈수행정의 제어 기능을 수행하는 세탁기의 핵심부품으로 사용 중 브레이크 밴드소음을 유발하여 소비자의 불만족 요소로 작용하고 있다. 그러나 드럼과 브레이크 페드의 정확한 마찰소음 현상 규명이 안되어 불량 개선에 많은 어려움이 있다. 이를 해결하고자 소음, 진동, 소재 분석 및 ESPI(Electronic Speckle Pattern Interferometry) 분석을 통해 고장원인을 규명하였다. 특히 ESPI는 비접촉, Full Field 정밀 변형 가시화 장치로 Shaft Ass'y의 동작 중 공진소음 발생 부위를 변형 가시화를 통해 정확하게 찾을 수 있었다. 밴드소음 원인은 브레이크 Lever의 공진에 의해 발생하였고 브레이크 밴드 패드의 접촉면적 불균일로 인한 국부적 마찰력 증대가 소음원으로 작용하였다. 밴드소음의 정확한 고장 메커니즘 규명을 통해 개선안을 도출하여 적용하였고 밴드소음 개선효과를 얻을 수 있었다.

• Tribology and Lubricants
• /
• v.32 no.1
• /
• pp.9-17
• /
• 2016

Contact between solid surfaces is one of the most important factors that influence dynamic behavior in micro/nanoscale. Although numerous theories and experimental results on contact behavior have been proposed, a thorough investigation for nanomaterials is still not available owing to technical difficulties. Therefore, molecular dynamics simulation was performed to investigate the contact behavior of nanomaterials, and the application of conventional contact theories to nanoscale was assessed in this work. Particularly, the contact characteristics of cylindrical nanowires were examined via simulation and contact theories. For theoretical analysis, various contact models were utilized and work of adhesion, Hamaker constant and elastic modulus those are required for calculation of the models were obtained from both indentation simulation and tensile simulation. The contact area of the cylindrical nanowire was assessed directly through molecular dynamics simulation and compared with the results obtained from the theories. Determination of the contact area of the nanowires was carried out via simulation by counting each atom, which is within the equilibrium length. The results of the simulation and theoretical calculations were compared, and it was estimated that the discrepancy in the results calculated between the simulation and the theories was less than 10 except in the case of the smallest nanowires. As the result, it was revealed that contact models can be effectively utilized to assess the contact area of nanomaterials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.273-273
• /
• 2012

최근 스마트 윈도우, 자가세정(Self-Cleaning), 김서림방지(Anti-Fogging), 디스플레이 표시장치, 대전방지 코팅 등 다각적으로 활용이 가능한 PTFE (Ploytetrafluoroethylene)를 Sol-gel, Sputtering, Spin-Coating, CVD (Chemical vapor deposition)방법을 이용하여 낮은 표면에너지와 나노사이즈의 표면 거칠기를 가지는 $150^{\circ}$ 이상의 초-발수성 표면에 대한 많은 연구가 진행되고 있다. 본 실험에서는 영구자석을 이용한 고밀도 플라즈마로 높은 점착성과, 균일한 박막 및 대 면적 공정이 가능한 RF-magnetron sputtering방법을 이용하여 Plasma etching으로 표면적의 거칠기와 낮은 표면에너지를 만든 뒤, 발수특성을 가진 PTFE를 증착하여 접촉각 변화와 구조적 및 광학적 특성을 측정하였다. AFM (Atomic Force Microscope)측정결과 100 w에서 가장 높은 1.7 nm의 RMS(Root mean square)값이 측정되었고, 접촉각 측정결과 Plasma etched glass는 25 w에서 125 w로 증가함에 따라 친수성을 나타내었으며, 100 w에서 가장 낮은 $15^{\circ}$의 접촉각을 나타내었다. PTFE박막을 증착하였을 때는 100 w에서 $150^{\circ}$의 초발수 특성을 나타내었고, 투과율 측정 결과 85%이상의 높은 투과율을 나타내었다. Plasma etching을 이용한 PTFE 발수 특성은 비가 오면 자동으로 이물질이 씻겨 내리는 자동차 유리등의 개발이 가능하고, 높은 투과율이 요구되는 액정표시장치(LCD)같은 차세대 대형 디스플레이의 표면 코팅에 사용이 가능 할 것이라 사료된다. 본 연구는 중소기업청에서 지원하는 2011년도 산학연 공동기술개발 지원사업의 연구수행으로 인한 결과물임을 밝힙니다.

• KSBB Journal
• /
• v.8 no.1
• /
• pp.83-88
• /
• 1993

Lipase was separated using reverse mlcelles in a spray column. The 50 mM AOT-Isooctane solution was used as reverse micellar solution for the extraction of lipase (crude containing 25% Protein). Ionic strength was controlled by KCl(0.1M KCl for extraction, 0.5M KCl for back exlractlon). Acetate buffer and phosphate buffer were used for control of pH. The efficiencies of extraction and stripping were 30% and 50%. An increase of circulation did not change the efficiency of extraction in forward extraction. The optimum flow rate was around 0.10ml/sec.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.137-142
• /
• 2018

This paper is studied, as basic research for measuring the accurate fuel amount of the CNG tank by using the transmit-receive ultrasonic sensor, the receiving sensitivity according to changed the pressure inside the tank and the contact surface of the ultrasonic sensor is analyzed. Measurement was carried out while changing the contact surface of the tank and the sensor to three shapes of Point, Line, and Surface and charging the pressure in the tank at an interval of 1 bar from 0 bar to 5 bar. Experiment results, as the pressure in the tank increased the tendency of the received signal value of the ultrasonic sensor to decrease was confirmed. As the contact area between the tank and the sensor increased, the value of the received signal increased, but the noise also increased. The results of experiment, it is judged that accuracy can be improved by changing the contact surface of the sensor.

• Composites Research
• /
• v.36 no.6
• /
• pp.422-428
• /
• 2023

The electrical contact resistance between the bipolar plate (BP) and the carbon felt electrode (CFE), which are in contact by the stack clamping pressure, has a great impact on the stack efficiency because of the relatively low clamping pressure of the vanadium redox flow battery (VRFB) stack. In this study, a polyethylene (PE) composite-CFE hybrid bipolar plate structure is developed through a local heat welding process to reduce such contact resistance and improve cell performance. The PE matrix of the carbon fiber composite BP is locally melted to create a direct contact structure between the carbon fibers of CFE and the carbon fibers of BP, thereby reducing the electrical contact resistance. Area specific resistance (ASR) and gas permeability are measured to evaluate the performance of the PE composite-CFE hybrid bipolar plate. In addition, an acid aging test is performed to measure stack reliability. Finally, a VFRB unit cell charge/discharge test is performed to compare and analyze the performance of the developed PE composite-CFE hybrid BP and the conventional BP.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4277-4283
• /
• 2012

Slip coefficient, whose value is dependent on the condition of contact surface at the friction joint of high tension bolt, is determined by slip load. Because contact area affects slip load, contact area that varies with bolt hole size is also related to the slip coefficient. In this study, we manufactured 32 specimens and performed bending and tension tests in order to examine changes in slip coefficient and load with material type, bolt diameter, and size of bolt hole. Slip load of specimens with oversize bolt hole had strength that was more than 80% higher than the slip load of specimens with standard bolt hole, and it also exceeded the design slip strength. In addition, we observed significant correlation between net-section ratio and slip ratio of specimens with oversize and standard bolt hole. However, some differences between the specimens are thought to have been caused by reduction in initial axial force of high tension bolt, which is an important parameter of slip coefficient. It is self-evident that increased bolt hole size would lead to decrease in design strength as it reduces both slip coefficient and bolt axial force. Nevertheless, we suggest that some flexibility in regulation of bolt hole, as long as it does not threaten the structural stability, may be a positive factor in terms of workability and efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.878-885
• /
• 2008

The FPDs(Flat Panel Displays) such as LCD(Liquid Crystal Display) and PDP(Plasma Display Panel) and OLED(Organic Light Emitting Diode), recently, have been substituted for CRT(Cathode Ray Tube) displays because they have a convex surface, small volume, light weight and lower electric power consumption. The productivity of FPDs is greatly dependent on the area of thin glass panel with 0.6 - 0.8mm thickness because FPDs are manufactured by cutting a large-scaled thin glass panel with patterns to the required product dimensions. So FPD's industries are trying to increase the area of thin glass panel. For example, the thin glass panel size of the 8th generation is 2,200mm in width, 2,600mm in length and 0.7mm in thickness. The air flows both in the thin glass panel and in the porous PE-plate surface were modeled and analyzed, from which a working condition was estimated. The thin glass panel on the porous PE-plate surface with self-lubricating characteristics was investigated and compared with that on the square duct floating bar surface with many holes of 1mm diameter when the thin glass panel contacts the floating bar surface due to malfunction of electric power supply.

• Journal of Applied Biological Chemistry
• /
• v.61 no.3
• /
• pp.219-226
• /
• 2018

The purpose of this study was to investigate the effect of thermal treatments, such as a sous-vide and a conventional hot water cooking, on the texture changes of soybean sprout. A novel method to measure texture properties of soybean sprout have been determined because of the irregular geometry of soybean sprout. The shape of cotyledon of bean spout was accurately analyzed using an image processing and a geometry model. To minimize the effect of the contact area on the texture measurement, a blade type of probe was selected for the measurement. True stress was evaluated to reflect the shape changes during deformation, and demonstrated that the measurement accurately distinguished the effect of thermal treatment on the texture. Different heating time (i.e., 0, 10, 20, and 30 min) was applied for both sous-vide and conventional cooking. Thermal processing caused hardening of textures for both cotyledon and hypocotyl of soybean sprout. The conventional cooking method showed higher stress values than those of sous-vide cooking. Sprouts cooked by sous-vide released the moisture after thermal processing while sprout cooked by a conventional water bath method could hold the moisture content during thermal processing. The soybean sprouts treated by conventional cooking method showed a higher score in sensory evaluation.