• Korean Journal of Agricultural Science
• /
• v.6 no.2
• /
• pp.166-184
• /
• 1979

In order to prevent the water loss in the irrigation canal constructed on the sandy gravel layer or on the other highly permeable ground layer, lining has been practiced. Many studies have been done so far on the lining method to prevent the water loss in the irrigation canal and recently studies on the lining with plastic film or polyethylene film were also reported. However, the plastic film or polyethylene film has low strength and is liable to break, and water loss from pin hole caused by contacting with sand or gravel is highly predicted. This study was then conducted to find proper lining and buring method in canal construction of polypropylene mat after coated with vinyl, as one way to overcome the shortcoming frequently observed when plastic or usual polyehtylene film were used. Eventhough rather longer periods of experiments are needed to attain reliable and accurate results on the variation of durability, the durability of asphalt coated area, or on the damage due to freeze after burial or exposure of polypropylene mat, the experiemental results obtained during one year of period are summarized as follows: 1. The curvature at the area between canal bottom and side slope had increased stability and saved consruction cost. The relationship among the variation of curvature, the reduction of polypropylene mat and the reduced amount of soil cutting at each side slope was presented in Fig. 7 through 9. 2. The depth of covering material to protect polypropylene mat was desired to be over 30cm, considering the water depth, side slope, canal cleaning practices, traffic, or back pressure of irrigation period. 3. In order to increase the canal stability and to prevent slope erosion, sandy soil was required, to be placed under ground, and coarse gravel should cover the surface area of canal. 4. The studies on the stability of side slope in the canal should consider the passive area on the bottom and the slope should be about 1 to 2, considering the slope stability, allowable velocity and tractive force. 5. When compared with earth lining, the lining with polypropylene mat coated with vinyl was responsible to save 28% and 37% of canal lining cost, when the soil carrying distances were 500 and 700m. respectively. 6. The water interception was almost completely attained when the polypropylene mat coated with vinyl was used for lining. But further studies were assumed to be necessary for the use of asphalt since the strength of polypropylene mat connected with asphalt will vary with duration.

• The Journal of the Petrological Society of Korea
• /
• v.12 no.2
• /
• pp.79-99
• /
• 2003

Muscovite and biotite from 52 metasediments and 5 granites in the Hwasan area, the southwest of the Okcheon metamorphic belt and the Miwon-Jeungpyeong area, central Okcheon metamorphic belt were dated by the K-Ar and $^{40}$ Ar/$^{39}$ Ar methods. Muscovite and biotite ages from metapelitic and psammitic rocks (metasediments) of the Boeun and Pibanryeong units in the Hwasan area are concentrated in the mid-Jurassic (149-180 Ma). K-Ar and $^{40}$ Ar/$^{39}$ Ar ages for metapelitic and psammitic rocks of the Boeun and Pibanryeong units in the Miwon-Jeungpyeong area show complicated age distribution. Muscovite and biotite ages are classified by three groups, 142-194 Ma, 216-234 Ma, and 241-277 Ma. Younger (Cretaceous) ages occur only in metasediments close to Cretaceous granitic rocks in the southeastern region and the older ages of 216-277 Ma are restricted to the middle Part of the Jeungpyeong area. Most ages in the other area of the central Okcheon metamorphic belt fall between 142-194 Ma (Jurassic). K-Ar and $^{40}$ Ar/$^{39}$ Ar ages for granite from the northern part in the both the southwest and central Okcheon metamorphic belt also gave middle Jurassic ages (156-168 Ma). The similar ages from both metasediments and granites in the study areas indicate simultaneous cooling of both rocks to 300-350$^{\circ}C$ during the middle Jurassic. The state of graphitization of carbonaceous material of all metasediments in the study areas Indicates fully ordered graphite falling within a small range, from 3.353 to 3.359 ${\AA}$, which indicate amphibolite facies regional metamorphism. In the southern sector of the Boeun unit from the Hwasan area, metamorphic grade indicated by mineral paragenesis during regional intermediate-P/T metamorphism is greenschist facies. Whereas, the $d_{002}$ values for carbonaceous materials in the same sector show fully ordered graphite (ca. 500$^{\circ}C$) indicating amphibolite facies. This result with the concentration of mica ages of metasediments into the middle Jurassic, the presence of low-P/T thermal metamorphic zone (>500$^{\circ}C$) in the metasediments close to the Jurassic granite and the regional intrusion of Jurassic granites and their middle Jurassic intrusion and cooling ages may indicate the low-P/T regional thermal event during the early(\ulcorner)-middle Jurassic after main intermediate-P/T metamorphism which formed main mineral assemblage regionally in the study area. The regional thermal event failed, however, to reset the mineral assemblage of regional intermediate-P/T metamorphism except for narrow aureole (1-2 km) around Jurassic granite because e duration of thermal effect was relatively short by repid cooling of the Jurassic granite. In the middle part of the Jeungpyeong area, central Ogcheon metamorphic belt, muscovite and biotite K-Ar ages from 5 samples are 263-277 Ma and 241-249 Ma, respectively. An intermediate-P/T metamorphism is currently accepted to have occurred between 280 and 300 Ma. Therefore, the muscovite and biotite ages can be interpreted as cooling ages after Ml metamorphism indicating rapid cooling to ca 350$^{\circ}C$ between 280-300 Ma and 263-271 Ma, and biotite ages indicate slower cooling to ca. 300$^{\circ}C$ between 263-277 Ma and 241-249 Ma. However, more detail study is needed to confirm why the Permian to Triassic ages occur only in the middle Part of the Jeungpyeong area.a.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.177-193
• /
• 2009

The Samgwang deposit consists of eight massive mesothermal quartz veins that filled NE and NW-striking fractures along fault zones in Precambrian granitic gneiss of the Gyeonggi massif. The mineralogy and paragenesis of the veins allow two separate discrete mineralization episodes(stage I=quartz and calcite stage, stage II-calcite stage) to be recognized, temporally separated by a major faulting event. The ore minerals are contained within quartz and calcite associated with fracturing and healing of veins that occurred during both mineralization episodes. The hydrothermal alteration of stage I is sericitization, chloritization, carbonitization, pyritization, silicification and argillization. Sericitic zone occurs near and at quartz vein and include mainly sericite, quartz, and minor illite, carbonates and chlorite. Chloritic zone occurs far from quartz vein and is composed of mainly chlorite, quartz and minor sericite, carbonates and epidote. Fe/(Fe+Mg) ratios of sericite and chlorite range 0.45 to 0.50(0.48$\pm$0.02) and 0.74 to 0.81(0.77$\pm$0.03), and belong to muscovite-petzite series and brunsvigite, respectiveIy. Calculated $Al_{IV}$-FE/(FE+Mg) diagrams of sericite and chlorite suggest that this can be a reliable indicator of alteration temperature in Au-Ag deposits. Calculated activities of chlorite end member are $a3(Fe_5Al_2Si_3O_{10}(OH)_6$=0.0275${\sim}$0.0413, $a2(Mg_5Al_2Si_3O_{10}(OH)_6$=1.18E-10${\sim}$7.79E-7, $a1(Mg_6Si_4O_{10}(OH)_6$=4.92E-10${\sim}$9.29E-7. It suggest that chlorite from the Samgwang deposit is iron-rich chlorite formed due to decreasing temperature from high temperature(T>450$^{\circ}C$). Calculated ${\alpha}Na^+$, ${\alpha}K^+$, ${\alpha}Ca^{2+}$, ${\alpha}Mg^{2+}$ and pH values during wallrock alteration are 0.0476($400^{\circ}C$), 0.0863($350^{\circ}C$), 0.0154($400^{\circ}C$), 0.0231($350^{\circ}C$), 2.42E-11($400^{\circ}C$), 7.07E-10($350^{\circ}C$), 1.59E-12($400^{\circ}C$), 1.77E-11($350^{\circ}C$), 5.4${\sim}$6.4($400^{\circ}C$), 5.3${\sim}$5.7($350^{\circ}C$)respectively. Gain elements(enrichment elements) during wallrock alteration are $TiO_2$, $Fe_2O_3(T)$,CaO, MnO, MgO, As, Ag, Cu, Zn, Ni, Co, W, V, Br, Cs, Rb, Sc, Bi, Nb, Sb, Se, Sn and Lu. Elements(Ag, As, Zn, Sc, Sb, Rb, S, $CO_2$) represents a potential tools for exploration in mesothermal and epithermal gold-silver deposits.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.3.4-5
• /
• 1972

생활수준이 낮은 단계에 있어서는 우선 식량에 대한 수요가 강하다. 인간의 욕구가 만족스럽게 먹는다는 것에 대하여 제일 강하게 발동하는 것이다 그러나 점차 과학기술과 산업과 경제가 발전하여 성장과정에 오르게 되고 소득수준도 향상하게 되면 시장기구를 통해서 구입 할 수 있는 개인의 물적 소비재에 대해서는 점차 충족하게 되며 식량이외에도 의복, 전기기구 및 일용생활용품, 자동차 등에 이르기까지 더욱 고차원의 소비재가 보급하게 되는 것이다. 이렇게 되며는 사람의 욕구는 사적 재물이나 물적 수요에서 점진적으로 공공재나 또는 질적 수요(주택, 생활환경 등)의 방향으로 움직이게 되는 것으로써 여기에 환경오염 또는 공해문제에 대하여 의식하게 된다. 그러나 여기에서 더욱이 문제점이 되는 것은 소득 수준의 향상 과정이란 그 자체가 환경오염의 커다란 요인이라는 점이며 자동차의 급격한 보급과 생활의 편의성을 구하여 집중되는 도시인구의 집적, 높은 소득을 보장하기 위한 생산성 높은 중화학공업의 발전 등등은 그 자체가 환경권이란 사람이 요구하는 고차원의 권리를 침해하는 직접적인 요인이 된다는 것이다. 이와 같은 환경오염이나 공해문제에 대한 세계적인 논의는 이미 시작된 지 오래이지만 현재는 우리의 건강보호를 위해서나 생활환경의 보전을 위해서라는 점에서는 그치는 것이 아니고, 더욱 넓혀서 자연의 보호, 자원의 보호라는 견지로 확대되고 있다. 이와 같은 세계적인 확대된 이해와 이에 대한 대책강구의 제안은 1968년 국제연합의 경제사회이사회에서 스웨덴 정부대표에 의하여 제시되었으며 1969년의 우- 탄트 사무총장의 인간환경에 관한 보고서, 1970년 Nixon 미대통령의 연두일반교서 그리고 1972년 5월 6일 스웨덴의 스톡홀롬에서 개최되는 인간환경회의의 주제 등을 통해서 알 수 있고, 종래의 공해나 생활환경의 오염문제라는 좁은 개념에서가 아니고 인간환경전체의 문제로 다루고 있는 것이다. 즉 환경개발(도시, 산업, 지역개발에 수반된 문제), 환경오염(인위적 행위에 의하여 환경의 대인간조건이 악화하는 문제) 자연ㆍ자원의 보호관리(지하, 해양자원, 동식물, 풍경경치의 문제)란 3개 측면에서 다루고 있는 것이다. 환경오염이란 문제를 중 심하여 보면 환경을 구성하는 기본적인 요소로서 대기, 물, 토지 또는 지각. 그리고 공간의 사대요소로 집약하여 생각할 수 있음으로 이 4요소의 오염이 문제가 되는 것이다. 대기의 오염은 환경의 오염중 가장 널리 알려진, 또 가장 오랜 역사를 가진 오염의 문제로써 이에 속하는 오염인자는 분진, 매연, 유해가스(유황산화물, 불화수소, 염화수소, 질소산화물, 일산 화염소 등) 등 대기의 1차 오염과 1차 존재한 물질이 자외선의 작용으로 변화발생 하는 오존, PAN등 광화학물질이 형성되는 2차적인 오염을 들 수 있다. 기외 카도미움, 연등 유해중금속이나 방사선물질이 대기로부터 토지를 오염시켜서 토지에 서식하는 생물의 오염을 야기케 한다는 점등이 명백하여지고 있으며 대기의 오염은 이런 오염물질이 대기중에서 이동하여 강우에 의한 침강물질의 변화를 일으키게 되며 소위 광역오염문제를 발생케하며 동시에 토지의 토질저하등을 가져오게 한다. 물의 오염은 크게 내육수의 오염과 해양의 오염의 양면으로 나누어 볼 수 있다. 하천의 오염을 방지하고 하천을 보호하기 위한 움직임 역시 환경오염의 역사상 오래된 문제이며 시초에는 인분뇨와의 연결에서 오는 세균에 의한 오염이나 양수 기타 일반하수와의 연결에서 오는 오염에 대비하는 것부터 시작하였지만 근래에는 산업공장폐수에 의한 각종 화학적유해물질과 염료 그리고 석유화학의 발달에 의한 폐유등으로 인한 수질오탁문제가 점차 크게 대두되고 있다. 이것은 측 오염이란 시초에 우리에게 주는 불쾌감이 크므로 이것을 피하자는 것부터 시작하여 인간의 건강을 지키고 각종 사용수를 보존하자는 용수보존으로 그리고 이제는 건강과 용수보존뿐만 아니라 이것이 농림 수산물에 대한 큰 피해를 주게됨으로써 오는 자연환경의 생태계보전의 문제로 확대전환하고 있는 것이다. ？간 특히 해양오염에 대한 문제는 국지적인 것에만 끝이는 것이 아니고 전세계의 해양에 곧 연결되는 것이므로 세계각국의 공통관심사로 등장케 되었으며 이것은 특히 폐유가 유류수송 도중에 해양에 투기되는 유류에 의한 해양의 유막성형에서 오는 기상의 변화와 물피해등이 막심함으로 심각화 되고 있다. 각국이 자국의 해안과 해양을 보호하기 위하여 조치를 서두르고 있는 현시점에서 볼 때에는 이는 국제문제화하고 있으며 세계적인 국제적 협력과 협조의 필요성이 강조되는 좋은 예라 하겠다. 토양의 오염에 있어서는 대기나 수질의 오염이 구국적으로 토양과 관련되고 토양으로 환원되는 것이지만 근래에 많이 보급사용되는 농약과 화학비료의 문제는 토양자체의 오염에만 그치는 것이 아니고 농작물을 식품으로 하여 섭취함으로써 발생되는 인체나 기타생물체의 피해를 고려할 때 더욱 중요한 것이며, 또 토질의 저하를 가져오게 하여 농림생산에 미치는 영향이 적지 않을 것이다. 지반강하는 지각 에 주는 인공적 영향의 대표적인 것으로써 지하수나 지하 천연가스를 채취이용하기 위하여 파들어 감으로써 지반이 침하 하는 것이며 건축물에 대한 영향 특히 풍수해시의 재해를 크게 할 우려가 있는 것이다. 공간에 있어서의 환경오염에는 소음, 진동, 광선, 악취 등이 있다. 이들은 특수한 작업환경의 경우를 제외하고는 건강에 직접적인 큰 피해를 준다고 생각할 수 없으나 소음, 진동, 관선, 악취 등은 일반 일상시민생활에 불쾌나 불안을 줌으로써 안정된 생활을 방해하는 요인이 되는 것이다. 공간의 오염물로써 새로운 주목을 끌게된 것은 도시산업폐기물로써 이들은 대기나 물 또는 토지를 오염시킬 뿐만 아니라 공간을 점령함으로써 도시의 미관이나 기능을 손상케 하는 것이다. 즉 노배폐차의 잔해, 냉장고등고형폐기물등의 재생불가능한 것이나 비니루등 합성물질로 된 용기나 포장 등으로 연소분해 되지 않은 내구소비재가 이에 해당하는 것으로 이는 maker의 양식에 호소하여 그 책임 하에 해결되어야 할 문제로 본다. 이렇듯 환경오염은 각양각색으로 그 오염물질의 주요 발생원인 산업장이나 기타 기관에서의 발생요인을 살펴보며는 다음과 같은 것으로 요약할 수 있다. A. 제도적 요인 1. 관리체재의 미비 2. 관리법규의 미비 3. 책임소재의 불명확 B. 자재적 요인 1. 사용자재의 선택부적 2. 개량대책급 연구의 미흡 C. 기술적 요인 1. 시설의 설계불량, 공정의 결함 2. 시설의 점검, 보전의 불충분 3. 도출물의 취급에 대한 검사부족 4. 발생방지 시설의 미설치, 결함 D. 교육적 요인 1. 오염물질 방제지식의 결여 2. 법규의 오해, 미숙지 E. 경제적 요인 1. 자금부족 2. 융자상의 문제 3. 경제성의 문제 F. 정신적 요인 1. 사회적 도의심의 결여(이기주의) 2. 태만 3. 무지, 무관심 등이다. 따라서 환경오염의 방지란 상기한 문제의 해결에 기대하지 않을 수 없으나 이를 해결하기 위하여는 국내적 국제적 상호협조에 의한 사회각층의 총력적 대책이 시급한 것이다. 이와 같은 환경오염이 단속된다 하며는 미구에 인류의 건강은 물론 그 존립마저 기대하기 어려울 것이며, 현재는 점진적으로 급성피해에 대하여는 그 흥미가 집중되어 그 대비책도 많이 논의되고 있지만 미량의 단속접촉에 의한 만성축적에 관한 문제나 이와 같은 환경오염이 앞으로 태어날 신생률에 대한 영향이나 유전정보에 관한 연구는 장차에 대비하는 문제로써 중요한 것이라 생각된다. 기외에 우려되는 점은 오염방지책을 적극 추진함으로써 올 수 있는 파생적인 문제이다. 즉 오염을 방지하기 위하여 생산기업체가 투자를 하게 되며는 그만큼 생산원가가 상승할 것이며 소비가격도 오를 것이다. 반면 이런 시책에 뒤떨어진 후진국의 값싼 생산국은 자연 수입이 억제 당할 것이며, 이렇게되면 후진국은 무역경쟁에서 큰 상처를 입게될 것이고 뿐만 아니라 선진국에 필요한 오염물질의 발생이 높은 생산기기를 자연후진국에 양도하게 될 것임으로 후진국의 환경오염은 배가할 우려가 있는 것이다. 또 해양오염을 방지할 목적에서와 같이 자국의 해안보호를 위하여 마련된 법의 규제는 타국의 선박운항에 많은 제약을 가하게 될 것이며 이것 역시 시설이 미약한 약소후진국의 선박에 크게 영향을 미치게 될 것임으로 교통, 해운, 무역등을 통한 약소후진국의 경제성장에 제동을 거는 것이 될 것이다. 이렇듯 환경오염의 문제는 환경자체에 대해서만 아니라 부산물적으로 특히 후진국에는 의외 문제를 던져주게 되는 것임으로 환경오염에 대해서는 물론, 전술한 바와 같이 인간환경전체의 문제로써 Nixon 대통령이 말한 결의와 창의와 그리고 자금을 가지고 과감하게 대처해 나가야 할 것이다.

• Journal of Intelligence and Information Systems
• /
• v.18 no.3
• /
• pp.153-169
• /
• 2012

Exhibitions have played a key role of effective marketing activity which directly informs services and products to current and potential customers. Through participating in exhibitions, exhibitors have got the opportunity to make face-to-face contact so that they can secure the market share and improve their corporate images. According to this economic importance of exhibitions, show organizers try to adopt a new IT technology for improving their performance, and researchers have also studied services which can improve the satisfaction of visitors through analyzing visit patterns of visitors. Especially, as smart technologies make them monitor activities of visitors in real-time, they have considered booth recommender systems which infer preference of visitors and recommender proper service to them like on-line environment. However, while there are many studies which can improve their performance in the side of new technological development, they have not considered the choice factor of visitors for booth recommender systems. That is, studies for factors which can influence the development direction and effective diffusion of these systems are insufficient. Most of prior studies for the acceptance of new technologies and the continuous intention of use have adopted Technology Acceptance Model (TAM) and Extended Technology Acceptance Model (ETAM). Booth recommender systems may not be new technology because they are similar with commercial recommender systems such as book recommender systems, in the smart exhibition environment, they can be considered new technology. However, for considering the smart exhibition environment beyond TAM, measurements for the intention of reuse should focus on how booth recommender systems can provide correct information to visitors. In this study, through literature reviews, we draw factors which can influence the satisfaction and reuse intention of visitors for booth recommender systems, and design a model to forecast adaptation of visitors for booth recommendation in the exhibition environment. For these purposes, we conduct a survey for visitors who attended DMC Culture Open in November 2011 and experienced booth recommender systems using own smart phone, and examine hypothesis by regression analysis. As a result, factors which can influence the satisfaction of visitors for booth recommender systems are the effectiveness, perceived ease of use, argument quality, serendipity, and so on. Moreover, the satisfaction for booth recommender systems has a positive relationship with the development of reuse intention. For these results, we have some insights for booth recommender systems in the smart exhibition environment. First, this study gives shape to important factors which are considered when they establish strategies which induce visitors to consistently use booth recommender systems. Recently, although show organizers try to improve their performances using new IT technologies, their visitors have not felt the satisfaction from these efforts. At this point, this study can help them to provide services which can improve the satisfaction of visitors and make them last relationship with visitors. On the other hands, this study suggests that they managers along the using time of booth recommender systems. For example, in the early stage of the adoption, they should focus on the argument quality, perceived ease of use, and serendipity, so that improve the acceptance of booth recommender systems. After these stages, they should bridge the differences between expectation and perception for booth recommender systems, and lead continuous uses of visitors. However, this study has some limitations. We only use four factors which can influence the satisfaction of visitors. Therefore, we should development our model to consider important additional factors. And the exhibition in our experiments has small number of booths so that visitors may not need to booth recommender systems. In the future study, we will conduct experiments in the exhibition environment which has a larger scale.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.108-118
• /
• 2009

Statement of problem: Volume stability, microstructure reproducibility and fluidity along with compatibility with dental stone must be in consideration in order to use tissue conditioner as a material for functional impression. There are few studies concerning the influence of time factor in oral condition on surface roughness of the stone and optimal retention period in the oral cavity considering such changes in surface roughness. Purpose: The purpose of this study was to find out the influence of various kinds of tissue conditioner, its powder/liquid ratio and immersion time on surface roughness of the stone. Material and methods: Materials used in this study were the three kinds of tissue conditioners(Coe-Comfort, Visco-Gel, Soft-Liner) and were grouped into three: group R-mixed with standard powder/liquid ratio that was recommended by the manufacturers, group M-mixed with 20% more powder, group L-mixed with 20% less powder. Specimens were made with the size of 20 mm diameter and 2 mm width. Each tissue conditioner specimens were subdivided into 5 groups according to the immersion time(0 hour, 1 day, 3 days, 5 days, 7 days), completely immersed into artificial saliva and were stored under $37^{\circ}C$. Specimens of which the given immersion time elapsed were taken out and were poured with improved stone, making the stone specimens. Surface roughness of the stone specimens was measured by a profilometer. Results: Within the limitation of this study, the following results were drawn. 1. Major influencing factor on surface roughness of the stone model made from tissue conditioner was the retention period(contribution ratio($\rho$)=62.86%, P<.05) of the tissue conditioner in oral cavity to make functional impression. 2. In case of Coe-Comfort, higher mean surface roughness value of the stone model with statistical significance was observed compared to that of Soft-Liner and Visco-Gel as immersion time changes(P<.05). 3. In case of group L(less), higher mean surface roughness value of the stone model with statistical significance was observed compared to that of R(recommended) and M(more) group as immersion time changes(P<.05). Conclusion: We may conclude that as the retention period of time in oral cavity influences surface roughness of the stone model the most and as the kind of tissue conditioner and its P/L ratio may influence also, clinician should well understand the optimal retention period in oral cavity and choose the right tissue conditioner for the functional impression, thus making the functional impression with tissue conditioner usefully.

• Journal of Preventive Medicine and Public Health
• /
• v.4 no.1
• /
• pp.77-87
• /
• 1971

A study of the knowledge, attitude and practices about the maternal and child health of 305 married women residing in apartments at the Yonsei Community Health area was conducted during the period from November to December 1970 using designed questionnaire with well trained interviewers. The results and findings obtained from the study are summarized as follows: A. Pregnancy and Birth Questions were asked about their last child. 1. 16.4% of the women were pregnant. 2. Among 281 women who had experienced delivery, 48.0% were assisted by doctor or midwisves for their last delivery, while the rest of women delivered their last baby at home without any professional's assistance. The higher the level of education or the greater exposure to mass communication, the more the deliveries were assisted by doctors or midwives. Those women who were born and raised in cities had more deliveries assisted by doctors and midwives than those who were not. 3. Kinds of delivery sheets used. Among 141 cases of home delivery 68% used cement bag paper or vinyl sheets. Three% used nothing and remained used unsterile materials. 4. Among 141 cases of home delivery, 70.2% used scissors. The rest of them used other methods. 5. 47.3% of the women had a rest for one month or more after birth. The higher the level of education, the longer the period of rest was observed. 6. 52.4% of the women fed the colostrum to their babies. This was not related to the mother's education. 7 About half(42.9%) of the women had poor knowledge about a proper diet for the pre and post natal period. B. Child Health 1. Knowledge and practice regarding to the immunization for their children: Most of the women (93.2%) could name at least one kind of immunization. 20.3% could name 6 kinds of immunization. Mothers education level did not influence their ability to name immunizations. 85.2% of children had been immunized at least once. 2. Morbidity of last born children: 48.1% of their last born children were found to have been sick during the last year. Less than half(41.5%) of the sick children were seen by doctor. 3. Counselling at well baby clinic: Most of the women(76.5%) had no counselling for their children. Registration rate at the well baby clinic at the Severance Hospital was 13.2%. 45.9% wanted to visit to the well baby clinic at the Severance Hospital. 4. Weaning Period: 44.6% said that the beginning of the weaning for their last born children was from 6 months to twelve months of age. The most important reason of weaning was the health of both mothers and children. 5. Knowledge and Practice regarding birth and death Registration: 64.6% of the women could name correctly the Ku-office as the place for the registration. Only 29.2% registered the birth of their last born children within 14 days. C. Knowledge, Attitude and Practice regarding to family planning Most: of the women accepted the idea of family planning. 97.7% could name at least one contraceptive method. 35.4% were found to be current users of contraceptive methods. The ideal number of children was 3.1 in average.

• Journal of Chest Surgery
• /
• v.39 no.4 s.261
• /
• pp.289-297
• /
• 2006

Background: Surgery for Stanford type A aortic dissection shows a high operative mortality rate and frequent postoperative brain injury. This study was designed to find out the risk factors leading to operative mortality and brain injury after surgical repair in patients with type A aortic dissection. Material and Method: One hundred and eleven patients with type A aortic dissection who underwent surgical repair between February, 1995 and January 2005 were reviewed retrospectively. There were 99 acute dissections and 12 chronic dissections. Univariate and multivariate analysis were performed to identify risk factors of operative mortality and brain injury. Resuit: Hospital mortality occurred in 6 patients (5.4%). Permanent neurologic deficit occurred in 8 patients (7.2%) and transient neurologic deficit in 4 (3.6%). Overall 1, 5, 7 year survival rate was 94.4, 86.3, and 81.5%, respectively. Univariate analysis revealed 4 risk factors to be statistically significant as predictors of mortality: previous chronic type III dissection, emergency operation, intimal tear in aortic arch, and deep hypothemic circulatory arrest (DHCA) for more than 45 minutes. Multivariate analysis revealed previous chronic type III aortic dissection (odds ratio (OR) 52.2), and DHCA for more than 45 minutes (OR 12.0) as risk factors of operative mortality. Pathological obesity (OR 12.9) and total arch replacement (OR 8.5) were statistically significant risk factors of brain injury in multivariate analysis. Conclusion: The result of surgical repair for Stanford type A aortic dissection was good when we took into account the mortality rate, the incidence of neurologic injury, and the long-term survival rate. Surgery of type A aortic dissection in patients with a history of chronic type III dissection may increase the risk of operative mortality. Special care should be taken and efforts to reduce the hypothermic circulatory arrest time should alway: be kept in mind. Surgeons who are planning to operate on patients with pathological obesity, or total arch replacement should be seriously consider for there is a higher risk of brain injury.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.101-108
• /
• 2012

This study was conducted to confirm the mass production of male pupae and sex-limited larval marking variety as a host for synnemata production of Isaria tenupes in RDA(Rural Development Administration). Silkworm pupation, infection rate and synnemate formation of I.tenuipes were examined. Among the silkworm varieties tested, male Hansaengjam showed the highest pupation rate at 98.7%. I. tenuipes infection rate of larvae of newly-exuviated 5th instar silkworm was 83.7 ~ 90.4% in the spring rearing season and 91.7 ~ 96.6% in the autumn rearing season. Synnemata production of I. tenuipes was execellent in female Yangwonjam with an incidence rate of 99.5% followed by male Yangwonjam(99.5%) and Baegokjam(99.4%) in the spring and autumn rearing season. Synnemata living weight ranged from 0.93 ~ 1.25 g in the spring rearing season. The female Hansaengjam had the heaviest synnemata weight(1.25 g). Synnemata dry weight ranged from 0.27 ~ 0.35 g in the spring rearing season. The female Yangwonjam had the heaviest synnemata weight(0.35 g).

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.329-339
• /
• 2021

Soybeans (Glycine max), one of major upland crops, require precise management of environmental conditions, such as temperature, water, and soil, during cultivation since they are sensitive to environmental changes. Application of spectral technologies that measure the physiological state of crops remotely has great potential for improving quality and productivity of the soybean by estimating yields, physiological stresses, and diseases. In this study, we developed and validated a soybean growth prediction model using multispectral imagery. We conducted a linear regression analysis between vegetation indices and soybean growth data (fresh weight and LAI) obtained at Miryang fields. The linear regression model was validated at Goesan fields. It was found that the model based on green ratio vegetation index (GRVI) had the greatest performance in prediction of fresh weight at the calibration stage (R²=0.74, RMSE=246 g/m², RE=34.2%). In the validation stage, RMSE and RE of the model were 392 g/m² and 32%, respectively. The errors of the model differed by cropping system, For example, RMSE and RE of model in single crop fields were 315 g/m² and 26%, respectively. On the other hand, the model had greater values of RMSE (381 g/m²) and RE (31%) in double crop fields. As a result of developing models for predicting a fresh weight into two years (2018+2020) with similar accumulated temperature (AT) in three years and a single year (2019) that was different from that AT, the prediction performance of a single year model was better than a two years model. Consequently, compared with those models divided by AT and a three years model, RMSE of a single crop fields were improved by about 29.1%. However, those of double crop fields decreased by about 19.6%. When environmental factors are used along with, spectral data, the reliability of soybean growth prediction can be achieved various environmental conditions.