• 한국재난정보학회 논문집
• /
• 제15권4호
• /
• pp.524-530
• /
• 2019

연구목적: 본 논문에서는 3차원 해석프로그램을 활용하여 인터페이스 요소를 구성하고, 일반적인 부재의 특성치와 강도가 보강된 부재의 특성치 등의 실제 표현할 수 있는 물성조건을 적용하여 연결체의 복합거동 안정성을 평가하고자 하였다. 연구방법: 해석 모델은 비선형적인 재료 거동을 포함한 솔리드 요소(Solid Element)를 사용하여 빔 구조 및 원형 플랜지, 볼팅 시스템 등의 부재를 설계도면과 동일한 치수로 모델링을 완성하였고 각 부재는 하나의 복합거동연결체로 조립되는 과정에서 다른 요소유형(Element Type) 접촉면의 통일성과 매쉬(Mesh) 생성을 보다 효율적으로 제어하여 분할작업(Partition)을 수행하였으며 부재들에 활용된 강재는 Gr. 50 탄소강 재질로 모델링 하였다. 연구결과: 부재별 접촉 인접부위, 하중재하부위, 고정단 부위, 취약예상부위 등으로 하여 하중단계별 변위 및 변형, 응력상태 등을 나타내고, 유한요소 해석 후 복합거동연결체의 각 하중단계에서의 변위, 변형, 응력 등의 분포도로 영향을 검증하고 설계의 타당성을 확인하였다. 결론: 따라서 이 결과를 토대로 하여 마이크로 파일의 설계 지지력이 결정되면 복합거동 연결체의 취약 지점의 파악과 보강의 정도를 파악할 수 있을 것으로 판단된다.

• 한국항공우주학회지
• /
• 제37권7호
• /
• pp.642-652
• /
• 2009

항공기 주구조에 많은 부분은 겹침이음 형태의 조립구조이며 이러한 구조는 프레팅 손상으로 인해 단순피로에 비해 현저히 수명이 감소된다. 특히 노후 항공기의 경우 프레팅 피로균열은 감항안전을 저해하는 중요한 요인으로 최근 대두된 수명연장 문제와 관련해서도 손상허용성 평가에 프레팅 피로수명 예측이 필수적으로 요구되고 있다. 이러한 배경으로 본 연구에서는 볼트 체결력이 서로 다른 겹침이음 구조시편에 대하여 일련의 프레팅 피로시험을 수행하고 탄소성 접촉응력 유한요소해석 결과로부터 프레팅 파라미터를 구하고 균열발생 및 성장 수명예측 모델식과 최근 제안된 수정 모델식을 통하여 프레팅 피로수명을 예측하였다. 또한 시험결과와 비교분석함으로써 실제 항공기 겹침이음 구조에 프레팅 피로수명 예측 모델식의 적용 유효성을 고찰하였다.

• Tribology and Lubricants
• /
• 제35권4호
• /
• pp.229-236
• /
• 2019

This study investigates the stress singularity that occurs at the contact edge of three bodies in a frictional complete contact. We use the asymptotic analysis method, wherein we constitute an eigenvalue problem and observe the eigenvalue behavior, which we use to obtain the order of the stress singularity. For the present geometry of three bodies in contact, a contact between a cracked indenter and half plane is considered. This is a typical geometry of the PCMI problem of a nuclear fuel rod. Thus, this paper, specifically presents the characteristics of the PCMI problem from the perspective of stress singularity. Consequently, it is noted that the behavior of the stress singularity varies with the difference in the crack angle, coefficient of friction, and material dissimilarity, as is observed in a frictional complete contact of two bodies. In addition, we find that the stress singularity changes essentially linearly with respect to the coefficient of friction, regardless of the variation in the crack angle and material dissimilarity. Concurrently, we find the order of singularity to be 0.5 at a certain coefficient of friction, irrespective of the crack angle, which we also observe in the crack problem of a homogeneous and isotropic body. The order of singularity can also exceed 0.5 in the frictional complete contact problem of three bodies. This implies that the propensity for failure when three bodies are in frictional complete contact can be even worse than that in case of a failure induced by a crack.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1222-1227
• /
• 2003

Pitting wear is a dominant form of polyethylene surface damage in total knee replacements, and may originate from surface cracks that propagate under repeated tribological contact. In this study, stress intensity factors, $K_{I}$ and $K_{II}$, were calculated for a surface crack in a polyethylene - CoCr - bone system under the rolling and/or sliding contact pressures. Crack length and load location were considered in determination of probable crack propagation mechanisms and fracture modes. Positive $K_{I}$ values were obtained for shorter cracks in rolling contact and for all crack lengths when the sliding load was apart from the crack. $K_{II}$, was the greatest when the load was directly adjacent to the crack $(g/a={\pm}1)$. Sliding friction caused a substantial increase of both $K_{I}^{max}$ and $K_{II}^{max}$. The effective Mode I stress intensity factors, $K_{eff}$, were the greatest at $g/a={\pm}1$, showing the significance of high shear stresses generated by loads adjacent to surface cracks. Such behavior of $K_{eff}$ suggests mechanisms for surface pitting by which surface cracks may propagate along their original plane under repeated rolling or sliding contact.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1044-1048
• /
• 2006

Nuclear power generation is very dangerous in occasion that skirt of structure by earthquake although it is high effective generation that can make a lot of energies with few raw material. when design, it must consider a lot of problems caused by an earthquake. The seismic analysis of the structure has been great concern in the engineering society with an effort to reduce the severe damages from an earthquake. So the earthquake resistant design is one of the crucial design procedures of a gate valve used in nuclear power generation. The gate valve which has the contact area between stem and bellows. Because of the contact area. The gate valve should be given high stress and frictional wear. In this thesis, Considering the gate valve which has some contact distance between stem and bellows. The gate valve which has some contact distance is analyzed by a commercial FEM code of Ansys and Then compared to the gate valve behavior which doesn't have contact distance.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.45-50
• /
• 2005

Stick type ignition coil(called a Cigar coil) is a kind of transformer for an automobile modulaized of distributer and electric cable. A material of cigar coil is PBT $GF30\%$ resin. This is an excellent engineering plastic with both mechanical and electrical properties. When we insert an HV terminal into the PBT $GF30\%$ resin jacket, it breaks the jacket, because the HV terminal is bigger than the jacket. It is a fatal on durability of a part. In this study, We used ANSYS FEM tool in order to stress analysis by contact. In order to automatically estimate possible maximum diameter of an HV terminal, we used an APDL. In the contact part, we considered the relation of the HV terminal's diameter with the amount of stress that occurred. This relation is able to be applied, in part, to the dimensions of the part design.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1671-1677
• /
• 2001

Cracks at mechanical fastener holes usually nucleate as elliptical comer cracks at the faying surface of the mechanical joints and grow as elliptical arc through cracks. The weight function method for elliptical arc through cracks at mechanical fastener holes has been developed and verified in the part I of this study. In part H, applying the weight function method, the effects of the amount of clearance on the mixed-mode stress intensity (actors are investigated and the change of crack shape is predicted from the analysis for various crack shapes. The stress intensity factors leer inclined crack are analyzed and critical angle at which mode I stress intensity factor becomes maximum is determined.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.87-95
• /
• 2003

본 논문에서는 매립지의 복합 차수 및 덮개 시스템의 안정성 평가를 위하여 개별요소법이 적용되었다. 이 방법은 차수재들의 접촉면에서 유발되는 전단응력과 차수재에 발생하는 인장력을 예측할 수 있어 각각의 차수재에 대한 전단 및 인장파괴에 대한 안전율을 산정할 수 있다. 해석에서 덮개나 차수재료로 사용된 흙의 경우 절편으로 나눈 다음 각 측면들에 탄소성 Winkler 스프링으로 연결되는 것으로 가정하였으며, 지오맴브레인과 같은 차수재들의 경우 절편으로 나뉘어져 인장스프링으로 연결되었다고 가정하여 거동을 모델링하였다. 제안된 방법을 사용한 사례연구와 함께 예제해석에 대한 한계평형법에 근거한 기존 해석방법들과 비교를 통하여 제안된 방법의 적용성을 검토하였다.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.1-6
• /
• 2015

Transmission of a tracked vehicle designed for multiple functions such as steering, gear-shifting, and braking is a core component of heavy vehicle to which the power is transferred based on combined technology of various gears, bearing, and fluid machineries. Robustness and durability of transmission, however, have been issued due to a large number of driving units and sub-components inside its body. The bevel gears are major components for the transmission of power in a transmission. Increasing the tooth surface roughness and chamfering of the bevel gears, especially, we aim to improve the quality of transmission. In this study, design structural evaluation is conducted on bevel gears of transmission for tracked vehicle using the ROMAX-DESIGNER program. By doing so, design safety of the bevel gears has been evaluated based on the gear strength theory of ANSI/AGMA 2003 B97 standard.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1645-1652
• /
• 2002

The failure analysis on fractured parts is divided into the qualitative method by naked eyes and metallurgical microscope etc. and the quantitative method by SEM and X-ray diffraction etc. X-ray fractography can be applied to contaminated surface as well as clean surface and gain the plastic deformation and the residual stress near the fractured surface. Turbine blade is subject to cyclic bending force by steam pressure and suffers fatigue damage according to the increasing operating time. Therefore, to clean up the fracture mechanism of torsion-mounted blade in nuclear plant, the fatigue and the X-ray diffraction test was performed on the 12%Cr steel fur turbine blade and the fractured parts. The correlation of X-ray parameter and fracture mechanics parameter was determined, and then the load applied to actual broken turbine blade was predicted. Failure analysis was performed by contact stress analysis and Goodman diagram of torsion-mounted blade.