• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.215-222
• /
• 2010

Average speed denotes a travel speed based on the average travel time of vehicles to traverse a segment of roadway, and average travel speed is used as a measure of effectiveness (MOE) suggested in the highway capacity manual (HCM) for evaluating the level of service (LOS) of roadway. Most of the urban freeways in our country are having congestion problem regardless of the rush hours as a high-speed highway with a speed limit of 80km/h or less. Especially traffic congestion within the ramp junction areas is becoming worse by the increased traffic and lack of links with the arterials around the urban freeway. So, the purpose in this study is to identify the traffic characteristics within the ramp junction areas of urban freeway, predict the average speed within the ramp junction areas based on the traffic characteristics identified, and finally prove the validity of the average speed predicted.

• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.48-61
• /
• 2012

It is of great importance to assure the running safety, ride comfort and serviceability in designing the floating slab track for mitigation of train-induced vibration. In this paper, for this, analyzed are the system requirements for the running safety, ride comfort and serviceability, and then, the behavior of train and track at the floating slab track including the transition zone to the conventional concrete slab track according to several main design variables such as system natural frequency, arrangement of spring at transition, spacing of spring isolators, damping ratio and train speed, using the dynamic analysis technique considering the train-track interaction. The results of this study demonstrate that the discontinuity of the support stiffness at the transition results in a drastic increase of the dynamic response such as wheel-rail interaction force, rail bending stress and rail uplift force. Hence, it is efficient to decrease the spacing of springs or to increase the spring constants at the transition to obtain the running safety and serviceability. On the other hand, the vehicle body acceleration as a measure of ride comfort is little affected by the discontinuity of the stiffness at the transition, but by the system tuning frequency; thus, to obtain the ride comfort, it is of great significance to select the appropriate system tuning frequency. In addition, the effects of damping ratio, spacing of springs and train speed on the dynamic behavior of the system have been discussed.

• Journal of the Korean Society for Railway
• /
• v.11 no.2
• /
• pp.195-202
• /
• 2008

The transition area between a bridge and an earthwork is one of the weakest area of track because of the track geometry deterioration caused unequal settlement of backfill of abutment. In case of a ballastless track, the approach slab could be installed to prevent such a phenomenon. But, if there is occurred the inclined displacement on the approach slab by a settlement of the foundation or formation, the track is also under the inclined displacement. And this defect causes reducing the running stability of a vehicle, the riding comfort of passengers, and increasing the track deteriorations by excessive impact force acting on the track. In this study, parametric studies were performed to investigate the displacement limit on the approach slab to avoid such problems. The length and the amount of unequal settlement of approach slab were adopted as parameter for numerical analysis considering vehicle-track interaction. Car body accelerations, variations of wheel force, stresses in rail, and uplift forces induced on fastener clip were investigated. From the result, resonable settlement limit on the end of an approach slab according to slab length was suggested.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.214-221
• /
• 2010

The transitional zone between tunnel and earthwork is one of the most vulnerable areas site for railway lines and because of differential settlement due to different stiffness of each supporting layer, it has to conducted a maintenance work constantly. In this study, it is conducted to compare the effect of reinforcement by wheel load and displacement of the sleepers after existing sleepers are replaced with the large sleepers for 20m long in-field transitional zone. Also, numerical parametric study using multi-layer elastic method has been performed to compare rail force, settlement and stresses of ballast while varying size and space of the sleeper. The field test and numerical results show that replacing the large sleepers improves about 10% of total settlement and coefficient of wheel force than conventional sleepers. Effectiveness of improvement is about 9.3%, 4%, 14.5% for rail seat force, settlement of sleepers and ballast pressure respectively with size of sleepers.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.647-655
• /
• 2016

The construction of high speed railways and improvement projects of for conventional railways require straight railway lines of railway, which leads to an increase of bridge and tunnel construction. Transition zones in railways means that the track support stiffness is variedvaries in over short ranges. Sspecial attention is required in theose transition zones since because instability of train running in train and irregularities of track irregularities are can frequently occurred. Typical transition zones are between bridges and earthworks and between tunnels and earthworks. On In a transition zone, a bridge abutment transition zone has many problems in with various causes. In this paper, fundamental problems of bridge abutment transition zones is are analyzed to enhance the understanding about of bridge abutment transition zones. Suggestions for improving problems in the transition zones are proposed.

• Annual Conference on Human and Language Technology
• /
• 2002.10e
• /
• pp.139-146
• /
• 2002

본 논문에서는 한국어의 대등접속의 구문분석 문제를 다룬다. 이를 전체 문장의 구문분석 기법에 기반하도록 하여, 문장 전체에 대한 분석 결과를 가장 좋게 하는 대등접속 구조가 선정되도록 하였다. 본 기법의 특징으로는 구간 분할 기법에 기반하여 대등접속 구조 후보의 수의 감소가 가능하게 되기 때문에 구문분석의 안정화를 얻게 되었다. 또한 전체 구문분석기에서 한 부품으로 동작함으로써 전체 문장 구조가 올바른 대등구조를 선택할 수 있게 되어, 보다 전역적인 정보의 이용에 의한 분석이 되었다. 선접속부와 후접속부 간의 구조 및 어휘적 유사성, 평행연결의 이용 등은 본 기법의 또 다른 특징으로 볼 수 있다. 실험결과 정상적인 문장의 대등접속에 대한 분석에서 매우 효과적으로 동작함을 관찰하였다.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1379-1385
• /
• 2007

In domestic transitional zone design, there is regulation to prevent generation of irregular substructure behaviors that negatively influence in prevention of plasticity settlement on approach section and contact section as well as relieve overall track rigidity by reducing sectional foundation and track stiffness difference, but design guideline that considers dynamic behavior of transitional track in actual service line is very insignificant. Therefore in this study, characteristics of transitional track dynamic behaviors by substructure stiffness are researched and measured dynamic response of transitional track by substructure stiffness in order to prove correlation between substructure and track and calculate elasticity(stiffness) and track load of transitional track by using measurement and formula to provide basic information for developing design guideline considering dynamic behavior of service line transitional track.

• Electronics and Telecommunications Trends
• /
• v.24 no.2
• /
• pp.120-130
• /
• 2009

일본은 유선 통화량 감소에 대응한 유선 접속료의 급격한 인상을 막기 위해 NTS 성격에 해당 비용을 5년에 걸쳐 단계적으로 접속원가에서 제외하여 기본료로 회수하도록 한 2004년의 결정을 수정하여 RT-GC 구간 전송로에 해당되는 NTS 비용을 다시 5년에 걸쳐 단계적으로 접속원가에 포함하기로 하였다. 이것은 기본료 부문에서의 경쟁이 도입된 상황을 고려했을 때 개정된 보편적 서비스 제도에서 고비용 지역 원가의 상당부분을 차지하고 있는 RT-GC 구간 전송로 비용이 회수되지 못하게 된 점을 고려한 것이다 이에 따라 NTS 비용으로 분류된 RT-GC 전송로 비용은 보편적 서비스 제도에서 문제된 관련 비용이 회수될 수 있도록 개선되기 전까지 접속료를 통해 회수되게 되었다. 중요한 것은 해당 비용이 실태에 맞게 최소한의 것에 한정되도록 하기 위해 접속원가에 포함되는 RT-GC 전송로 비용은 실제의 네트워크에 있어서 RT 설치국인 국사의 전송로 비용에 한정되도록 하고 있다는 것이다. 이와 같은 일본의 접근은 NTS 비용을 접속원가에서 제외한다는 원칙은 그대로 유지된 상황에서 보편적 서비스 제도 개선과정에서 발생되는 한시적 조치로서 고려되는 것이며, 이용자 부담을 완화한다는 원칙에 기초하고 있다.

• Journal of Korean Society of Transportation
• /
• v.13 no.3
• /
• pp.99-120
• /
• 1995

가속차선이 교통류의 운영상태와 안전에 기여하는 바는 벌써부터 인식되어 왔으나 이 변속차선이 유입형 연결로 접속부 전체의 운영에 미치는 영향을 수치화하거나 체계적으로 평가하기 위해 현장 자료를 바탕으로 한 실험적 연구는 진행되어 오지 못하엿다. 현재 널리 참고되고 있는 1985년 USHCM의 접속부 운영상태 분석 방법론은 단지 차선 1의 교통량을 예측하는 데 주안점을 두고 있는데 가속 차선의 길고 짧음에 따라 접속부 바로 전 차선 1의 교통량 분포가 크게 변화한다는 사실(많은 현장 관측을 통해 확인)은 고려하지 못하고 있다. 이는 접속부 운영 상태가 같은 교통량 조건하에서도 크게 차이가 나나다는 것을 뜻하며 가속차선의 존재를 무시한채 운영과 관련한 MOE를 도출하는 것이 서비스수준 산정 방법으로 충분한 것인가 하는 의문을 자연히 낳게 한다. 본 논문은 가속차선이 고속도로 연결로 접속부의 운영에 미치는 영향을 주로 다루고 있다. 가속차선의 독립적인 역할과 영향을 체계적으로 관찰하기 위해 미국내 여러 지역에서 8개의 고속도로 연결로접속부를 선택하고 각 지점에 접속부의 상하류 지역을 포함하는 2,000ft 구간내에 다섯대의 카메라를 설치, 지점별로 약 3시간 동안 자료를 수집하였다. 총 193개 자료수의 분석을 통해서 다중 회귀 모형을 구성하는 독립변수로 가속차선의 길이를 사용하는 것이 타당하다고 결론지었으며, 접속부 운영의 질, 특히 속도를 추정하기 위한 모형을 수립하였다. 본 연구를 통해 얻어진 관점과 방법론은 1994USHCM 고속도로 연결로 분석 방법론 설정에 일부분 반영되고 잇으며 특히 교통운영과 흐름의 방식에서 유사한 엇갈림 구간의 분석 방법과 일관성 있는 분석 체계 마련을 위해서 서비스수준 산정 절차 정립에 엇갈림 알고리즘을 활용하는 방안을 제시하였다.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.25-36
• /
• 2006

Through field surveys and evaluation on several widened concrete pavements, issues on construction and design related problems are broken down into three categories to be discussed; poor smoothness, influence of traffic vibration on concrete curing, and poor connection to the existing pavement. There are many places where about 100mm only of the marginal strip is removed and where defects such as widening and faulting are observed. Also cracks arise again from the patched areas due to stress concentration near the joint. Roughness on the widened concrete pavement was evaluated and there are some stations where the smoothness limit is over passed. For design consideration, shortage of the required force in the tie-bar is expected in case of road widening specially from 3 lanes to 4 lanes. Finally the average pull-out force of specimens made from the current practice was about 57% of the required force. New connecting methods were suggested in this study.