• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.54-67
• /
• 1991

In geological media with anisotropic properties, the strength anisotropy in intact rock is the most important issue in engineering aspects. Point-ioad(P/L) strength test designed to estimate the uniaxial compressive strength(${\sigma}_c$) can be used to evaluate the anisotropic strength characteristics of rocks. The relationship between ${\sigma}_c$ and P/L strength indices(I$_s$), obtained from the banded gneisses distributed in the Cheongyang area, varies depend mainly on the dip angle($\beta$) of foliation. The axial P/L strength indicies(I$_{sa}$) decreases with the increment of $\beta$, whereas diametral P/L strength indices(I$_{sa}$) increase with it. However, the ${\sigma}_c$ decreases with the increments of $\beta$ below about 40$^{\circ}$, but it increases with the increments of $\beta$ over about 40$^{\circ}$ in general. The correlation between ${\sigma}_c$ and I$_s$ suggests that ${\sigma}_c$ is related to the Isa withing low angle($\beta$<40$^{\circ}$) and the I$_{sd}$ within high angle ($\beta$>40$^{\circ}$), respectively. The ratios of I$_s$ to ${\sigma}_c$ are obtained as 11 to 14 in the the gneisses in the study area. The ratio of 24, which is generally adopted value, cannot always be truthworth to the gneisses in the study area. The ratio for the dykes, however, show a good correlation as 21 to 24.5 and, the value of 24 can be used for a homogeneous and isotropic materials such as dykes.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.29-46
• /
• 2004

It is important to identify geometries of fracture that act as a conduit of fluid flow for characterization of ground water flow in fractured rock. Fracture geometries control hydraulic conductivity and stream lines in a rock mass. However, we have difficulties to acquire whole geometric data of fractures in a field scale because of discontinuous distribution of outcrops and impossibility of continuous collecting of subsurface data. Therefore, it is needed to develop a method to describe whole feature of a target fracture geometry. This study suggests a new approach to develop a method to characterize on the whole feature of a target fracture geometry based on the Fourier transform. After sampling of specimens along a target fracture from borehole cores, effective frequencies among roughness components were selected by the Fourier transform on each specimen. Then, the selected effective frequencies were averaged on each frequency. Because the averaged spectrum includes all the frequency profiles of each specimen, it shows the representative components of the fracture roughness of the target fracture. The inverse Fourier transform is conducted to reconstruct an averaged whole roughness feature after low pass filtering. The reconstructed roughness feature also shows the representative roughness of the target subsurface fracture including the geometrical characteristics of each specimen. It also means that overall roughness feature by scaling up of a fracture. In order to identify the characteristics of permeability coefficients along the target fracture, fracture models were constructed based on the reconstructed roughness feature. The computation of permeability coefficient was performed by the homogenization analysis that can calculate accurate permeability coefficients with full consideration of fracture geometry. The results show a range between $10^{-4}{\;}and{\;}10^{-3}{\;}cm/sec$, indicating reasonable values of permeability coefficient along a large fracture. This approach will be effectively applied to the analysis of permeability characteristics along a large fracture as well as identification of the whole feature of a fracture in a field scale.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.159-166
• /
• 2009

Purpose: We wanted to evaluate the surgical results of early mobilization after rigid fixation of small coronoid fracture using the tension band technique Materials and Methods: Eight cases of coronoid fracture were fixed with the tension band technique and using K-wire and wire through the medial approach. All the cases were Regan-Morrey type 2. According to O'Driscoll, they were classified as 5 cases of the tip type (subtype 2) and 3 cases of the anteromedial type (1 case of subtype 2, and 2 case of subtype 3). The associated collateral ligament injuries (6 cases) and radial head/neck fractures (4 cases) were managed simultaneously. After immobilization for 5~7 days, active ROM exercise with a fitted hinge brace started and continued till postoperative 6 weeks. The patients were assessed for pain, ROM and functional disability using the Mayo elbow performance score (MEPS) at an average of 11 months (range: 6~28 months). The ulnar nerve symptoms were also investigated. Results: We observed solid union in all the coronoid fractures without hardware failure. An average of 2.2 wires (range: 2~4) were used. The mean extension was $3^{\circ}$(range: $0^{\circ}\sim25^{\circ}$), the mean flexion was $137^{\circ}$(range: $130^{\circ}\sim140^{\circ}$), the mean pronation was $69^{\circ}$(range: $45^{\circ}\sim90^{\circ}$) and the mean supination was $78^{\circ}$(range: $45^{\circ}\sim90^{\circ}$). The mean MEPS was 96 (range: 65~100). Ulnar nerve symptoms occurred at postoperative one day and persisted in one patient with the terrible triad of taking radial head excision and residual medial instability. Conclusion: The tension band technique uses easily obtained, economic K-wires and the wire was strong enough to permit early elbow ROM exercise and the technique might improve the elbow function. It was especially useful for fixation of multiple small fragments.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.729-738
• /
• 1997

To estimate the change in rice productivity around lake Juam due to construction of artificial lake, growth, yield components and yield of rice were measured at different locations around lake Juam for three years from 1994 to 1996. Automated weather stations(AWS) were installed nearby the experimental paddy fields, and daily maximum, average and minimum temperature, solar radiation, relative humidity, and precipitation were measured for the whole growing period of rice. Plant height, number of tillers, leaf area and shoot dry weight per hill were observed from 8 to 10 times in the interval of 7 days after transplanting. Yield and yield components of rice were observed at the harvest time. Simulation model of rice productivity used in the study was SIMRIW developed by Horie. The observed data of rice at 5 locations in 1994, 3 locations in 1995 and 4 locations in 1996 were inputted in the model to estimate the unknown parameters. Comparisons between observed and predicted values of shoot dry weights, leaf area indices, and rough rice yield were fairly well, so that SIMRIW appeared to predict relatively well the variations in productivity due to variations of climatic factors in the habitat. Climatic elements prior to as well as posterior to dam construction were generated at six locatons around lake Juam for thirty years by the method of Pickering et al. Climatic elements simulated in the study were daily maximum and minimum temperature, and amount of daily solar radiation. The change in rice productivity around lake Juam due to dam construction were estimated by inputting the generated climatic elements into SIMRIW. Average daily maximum temperature after dam construction appeared to be more or less lower than that before dam construction, while average daily minimum temperature became higher after dam construction. Average amount of daily solar radiation became lower with 0.9 MJ $d^{-1}$ after dam construction. As a result of simulation, the average productivity of habitats around lake Juam decreased about 5.6% by the construction of dam.

• Development and Reproduction
• /
• v.8 no.2
• /
• pp.119-122
• /
• 2004

It is well known that unidentified factors in sera, hormones and growth factors promote the proliferation of granulosa cells and nuclear maturation of bovine COCs in vitro. Attemps had been developed the simple composition of culture media and similar system to in vivo conditions has been applied. In the present study, we investigated the effect of TGF-${\beta}$ on in vitro maturation and in vitro development of Hanwoo COCs. When the COCs were matured in TCM 199 containing 0.1, 1 or 10 ng/ml TGF-${\beta}$ for 24 hrs, metaphaseⅡ of COCs were obtained 95.8%, 100% of matured COCs, respectively and there were no differences among the concentrations of TGF-${\beta}$. Matured COCs with TGF-${\beta}$ cultured in maturation medium after in vitro fertilization, developmental rate to blastocyst were 0~0.8%. Matured COCs with TGF-${\beta}$ were cultured in TCM 199+10% FBS, 0.8% BSA, 0.1% PVA, blastocyst formation were showed in 12.4%, 12.8%, 8.5% of those and cultured in IVMD or IVD without serum were 38.4%, 34.8%, respectively. There were significant differences among the media (P<0.05). TGF-${\beta}$ is available for i vitro maturation of bovine COCs, but further investigation would be need for finding the synergistic autocrine/paracrine fashion of other growth factors in early bovine development.

• Cartoon and Animation Studies
• /
• s.39
• /
• pp.59-83
• /
• 2015

Magical realism, blooming and improving in Latin America, opened the new vision about reality and rationalism, coming out from the out-styled frame of past. While having common points with unrealistic literature, which uses fantastical components, magical realism is different from Surrealism and fantasy literature that is focusing on reality and realizing reality intensely. In the early stage of this research, magical realism was restricted by the characteristics of literature of Latin America, but the research of magical realism is expanding in planning Post-Modernism nowadays. Lately, the influence of magical realism is identified in literatures, arts, films, and animations over the world; according to the research, however, research about magical realism in animations was not done in Korea before. A Korean independent animation "A coffee vending machine and its sword" was evaluated positively in many international film festivals is valuable as the research of magical realism. Throughout this study, this animation "A coffee vending machine and its sword" was analyzed by its narrative and images. The analysis of narrative consists two parts. One is about the form of narrative and the other is about contents through the story. Analysis of Image is also divided into two parts: background image and character image. In this animation, the protagonist is narrating about the fantastic accidents in his life and his own feelings towards it. The narration leads audience to understand his situation and feelings in meta-fiction. On the surface, audience watches the love story of a normal girl and coffee vending machine in this artwork, but deep inside the animation, it is visible that the directors tried to make audiences think about the life of 880,000-won Generation in Korea. The background image was represented as real places in Seoul including the landmark of Seoul, making mimesis of reality in Korea. The character image has two conflicting aspects with reincarnated warrior, Jinyoungyoung and a coffee vending machine. It is a hybrid-character transmogrifying between two characters. Likewise, "A coffee vending machine and its sword" has the characteristics of Korean magical realism through form, content and image. Through analyzing the Korean independent animation "A coffee vending machine and its sword", this research tried to find a way of using factors of fantasy, of representing reality as a dramatic device and of using magical realism of Korean animation for bond of sympathy with audience.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.334-342
• /
• 2016

Conventional eco-design has been implemented based only on the environmental aspects of a product. Key components of a product identified from the analysis of the environmental aspects have been the target for improvement in the conventional eco-design. The use of eco-design index (EDI) considering both the environmental and economic aspects, and utility value (UV) of a product can be envisaged as an alternative way of implementing and assessing the eco-design. The objective of this study was to propose the logic of the EDI and apply it to the components for performing printing function of the multi-function printer. The EDI was formulated by quantifying the UV, life cycle environmental impact (LCE) and life cycle cost (LCC) of the components of a product, here components of the printer. Of the eight components investigated, roller was identified as the best performing consumable in both the environmental and economic aspects. However, its UV was the lowest among the eight. The EDI of the roller was mere $4^{th}$ in ranking out of the eight. Transfer belt ranked $8^{th}$ and $5^{th}$ in the environmental and economic aspects, respectively, while $2^{nd}$ in the utility value with its EDI ranked $3^{rd}$. This indicates that not only the environmental aspects but also economic and utility value aspects should be considered when identifying the key components for improvement in the eco-design.

• Archives of design research
• /
• v.17 no.3
• /
• pp.221-230
• /
• 2004

Design textbooks for general education bring our attention to the education of design as a part of whole education. In this vein, this thesis tried to analyze and discuss on the current status of design education contents included in the 7th educational curriculum of the Art & Life. This study had a historical review of the contents of arts education as well as a review of theoretical contents in art education. Also this thesis analyzed five types of Art & Life text books currently used at high schools with weight given to the design and to the status of pictorial coverage in the text books. Finally, the thesis presented problems of design education through a comparative analysis of high school arts education and design education. Through the analysis, inequality of design contents in education was reported. It was clearly attributable to the backgrounds of text book writers. For example, authors with graphic design backgrounds tended to lack product and environment design concepts, while hand craft section of text books all showed a biased contents towards traditional Korean arts. In the analysis of pictorial coverage, similar to the composition of academic contents, coverage was concentrated in the graphic design areas; inequality in quantity of pictures found with a ratio of 1 to 4. In terms of areas of arts, design contents in text books were concentrated only in arts creation chapters among the 3 major areas of arts appreciation, understanding, and creation. Design education is attained in an atmosphere of creativity and the provision of ample teaching material. It is because diverse contents will generate the development of arts. When compared to design education curriculum of U.S. and Japan, these creativity put their focus of design education in the understanding and emotional contacts, so that every application is easily attained. In terms of expression learning, creativity and diversity of material are emphasized. From Kindergarten to middle, and high school periods, apparently the care contents of deign is emphasized. A textbook in the 7th education curriculum is one of the sources for education. In designing text books, learning process should be emphasized following subjects and natures of arts so that creativity can be achieved. Therefore, a systematic approach for design research and educational development for material would be needed in textbook design.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.199-208
• /
• 2005

This study analysis if the concepts of kitsch and vernacular remains as cultural elements for product design. Because their function and aesthetic value have vivid possibilities for general product design fields. For the purpose, this study limits its range within post modernism, kitsch, and vernacular, and analyzes their relationships. Against functionalism, post modernism had cultural pluralisms to approach into popular styles, and some of them was amusing design. That post modernism designs stimulated human beings' emotion by decorations or some symbolic forms from specific objects is similar to the symbolism, regionalism, or pluralism of kitsch or vernacular. Kitsch is a free style that is not limited in any specific trends. It is a Meta culture that has influenced into various fields including design, so kitsch does not have a parallel position with a product or design. In product design, kitsch is the behavior and result of imitating existing objects' images. It could have amusement according to which objects are imitated. So if human beings feel amusement by kitsch, it could be same as the direction of post modernism. Kitsch is determined by design atmospheres. They cannot be specified abjectly, and can be different according to people. With symbolism and regionalism, kitsch and vernacular appeared according to people's needs. While kitsch is consumer's tastes-oriented, vernacular is cultural tradition-oriented. Kitsch has symbolism that specifies products' functions or design concepts, and it is a communication method between human being and products. Because vernacular is province-oriented, it has a lot of styles according to regional living environments and cultural differences. So vernacular design reflects continued traditional lifestyles. By restorative memory, regionalism, cultural pluralism, amusement, and symbolism, kitsch and vernacular could be understood the sub or parallel concepts of post modernism. They might be easily miss-understood mixed concepts that have western and national characters. But in kitsch and vernacular concept, modernizing pas by using the pluralism of post modernism should be considered positive. So, the range of the further study is also supposed to be focused on more widened fields to, to establish cultural identification in design.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.