• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1327-1331
• /
• 2005

This study was to investigate the reduction of hydration heat by utilizing industrial by-products such as BFS(Blast Furnace Slag). DM(Dredged Mud) was used by parent soil and Ordinary portland cement was used by cementing material. Additive added to reduce the heat of hydration was BFS. From the results of experiment, hydration heat was decreased in accordance with the addition of BFS. The reason was that surface of BFS coated with aluminosulfate. Initial uniaxial strength was low, neither was not long term uniaxial strength. It was concluded that silica rich layer($H_2SiO_4^{4-}$) in solid phase early in the reaction of hydration was difficultly moved in liquid phase due to the increase of ZP(Zeta Potential). However, the ZP in the later hydration was decreased due to the acceleration of mobility of silica rich layer($H_2SiO_4^{4-}$). Therefore, long term physical properties such as uniaxial strength revealed.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.1
• /
• pp.13-23
• /
• 2008

The triaxial compression tests and consolidation tests using NaCl solution and leachates as substitute pore (or saturated) water in samples were carried out to find out the behavior characteristics of strength, deformation and permeability coefficient of contaminated clay. Also, the chemical property analysis on the clay samples using scanning electron microscope and energy dispersive x-ray spectrometer were involved. The magnitudes of composition ratio were shown in the order of O, C, Si, Al, and Fe as a result of chemical composition analysis for clay samples. Besides, as the results of triaxial compression tests and consolidation tests, the shear strength, compression and permeability properties were increased with increasing in the concentration of contaminant (NaCl). It may be considered that these circumstances be caused by the changes of soil structure to flocculent structure due to the decrease in the thickness of diffuse double layer with increasing in the concentration of electrolyte. MT3D model was also using to grasp the procedures that the groundwater may be contaminated by the leachates permeated through the clay liner. The results of contaminant transport analysis showed a tendency that the predicted concentration of groundwater was higher with increasing in the initial concentration of $Cl^-$ ion and increased as a nonlinear curves with time. The transportation distance calculated by the use of regression equation between the distance from contaminant source and the concentration of $Cl^-$ ion was increased with increasing the initial concentration.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.6
• /
• pp.21-29
• /
• 2008

As household and industrial wastes continue to rapidly increase every year, the demands for landfill sites are also increasing. However, the construction of landfill sites causes many problems due to the high costs of liners, while the leachate from the landfills generates secondary contamination of surrounding lands and groundwater. The purpose of this study is to determine the proper mixing ratio to meet the liner conditions (must be less than $1{\times}10^{-7}cm/sec$), using the local soil as the main material and using fly ash, bentonite, and cement as the mixing materials. The possibility of using this mixture as the liner for landfill sites was examined. To determine the proper mixing ratio, this study conducted basic physical properties tests, compaction tests, consolidation tests, and uniaxial compression tests. It was found that the higher the ratio of bentonite, the lower the coefficient of permeability, and the higher the ratio of fly ash, the higher the coefficient of permeability. The reason for this is that, while bentonite expands and fills pores, fly ash cannot fill the pores because the particles have a round shape and do not have adhesion. In conclusion, the optimum coefficient of permeability that meets the landfill liner condition was obtained when the ratio of bentonite was 15% or higher. If fly ash was mixed, the landfill liner condition was met when the ratio of bentonite was 15% or higher and the ratio of fly ash was 20% or lower.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.63-73
• /
• 2019

In this study, it was studied recycled soils with bentonite-polymer mixture in order to design economic landfill instead of clay liner. Recycled soil was used as SP, a sandy soil with 90.58% sand and 1.88% silt and clay. The recycled soils were mixed with 4%, 6%, and 8% bentonite by weight, and then compared with samples mixed with 2%, 3%, and 4% bentonite by weight in marine clay. Recycled soil satisfied the permeability criteria at 8%, and clay soil satisfied at 3%. In order to make a sample that satisfies the standard of the waste landfill, a permeability test was conducted by mixing 0.16%, 0.24%, and 0.28% of the polymer in a sample having 4% bentonite mixing ratio. The unconfined compression strength test was carried out at the same mixing ratio to confirm that the specification was satisfied. As the bentonite mixture ratio increased, the permeability coefficient and unconfined compression strength decreased. The strength in polymer mixing increased initially and then maintained a constant value. At 4% bentonite mixing ratio and 0.28% polymer mixing ratio, the coefficient of permeability was 1.0×10^-7 cm/sec or less, and the unconfined compression strength was over 500 kPa. It was confirmed that it can be used as a mixed liner material of waste landfills.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.2
• /
• pp.49-52
• /
• 2008

Most of waste sludge has generally been disposed in landfill site or dumped in the ocean, which will be banned by the content of its heavy metals according to London Dumping Convention in Korea. Therefore, environmentally friend methods are urgently required for the treatment and disposal of the sewage sludge. Thermal hydrolysis is one of the good treatment methods to solve the sludge problems. In this study, the physical and environmental testing was conducted to evaluate the feasibility of by-product cake from the thermal hydrolysis as liner or cover materials in landfill.

• Geotechnical Engineering
• /
• v.8 no.3
• /
• pp.51-60
• /
• 1992

This paper represents the physical and engineering characteristics of admixed liners obtained from several laboratory tests. Fly ash and weathered granitic soil are selected as primary materials, and bentonite and cement are used as additives. The results show that the maximum dry density reaches peak values at 5% and 25% of bentonite for Seochon and Samchonpo fly ash respectively, and for the weathered granitic soil, the maximum dry density increases continuously as the amount of bentonite increases. The strength of the admixed materials is not sensitive to the bentonite content, although it increases when the additives is cement. The required amount of bentonite to reach the hydraulic conductivity less than 10-7cm/sec are 18, 30, 10% of the sample weights for Seochon and Samchonpo fly ashes and the weathered granitic soil. The amount of additives show significant differences and depend on the grain size and their distributions and the amount of fine content in the primary materials

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.3
• /
• pp.173-179
• /
• 2010

In a HLW repository, the buffer is exposed to an elevated temperature due to a radioactive decay and geochemical conditions for a long time and such a hydrothermal condition may cause a significant loss of its barrier function. This study carried out hydrothermal tests with a domestic smectite clay to investigate the changes in the expandibility, layer charge, and cation exchange capacity of the smectite. When the temperature and potassium concentration in solution was increased for the hydrothermal treatments, the expandibility decreased, the layer charge negatively increased, and the CEC also decreased.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.29-38
• /
• 1998

The purpose of this research is to develop an amended clay liner by utilizing waste lime produced as a by-product in chemical industries. Waste lime contains various kinds of organics which affect the permeability, compactability, and unconfined compressive strengths of soil. The geotechnical engineering properties of waste were improved by adding other materials so that they might meet the EPA requirement of clay liner. Granite weathered soil, which is abundant in Korea and can be obtained easily in the field. was used as a primary additive to improve geotechnical engineering properties of waste lime. Various kinds of laboratory tests related to geotecnnical engineering properties, required to evaluate the design criteria for the clay liner in the solid waste landfill. were carried out by changing miRing ratio of waste lime with additive. According to the laboratory test results, in order to obtain the appropriate amended clay liner. the effective miffing ratio of waste lime in granite weathered soil was proved to be about 20~30%.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.1
• /
• pp.33-40
• /
• 2002

The study was performed to evaluate the effect of landfill leachate on the hydraulic conductivity of Geosynthetic Clay Liner (GCL) with two types of leachate. GCL used in waste landfills have a significant ability as a barrier material, however, they also have a potential danger when exposed to some organic and inorganic leachate as well as humic materials. In this study, swelling tests and hydraulic conductivity tests were performed to evaluate the effect of humic materials and landfill leachate on the hydraulic characteristics of the GCL. The result of swelling tests showed that the amount of humic materials and high electronic conductivity caused a decrease of the swelling of bentonite. This is expected to increase the hydraulic conductivity of GCL. The increasing of hydraulic conductivity observed for GCL permeated with 0-leachate was significantly higher than that of Y-leachate. This result shows that humic materials are obviously affecting with the increasing of hydraulic conductivity of GCL.

• Journal of the Korean Geosynthetics Society
• /
• v.1 no.1
• /
• pp.43-51
• /
• 2002

In this study, free swell index of betonite was examined in several regeants; distilled water, leachate, seawater and 3% NaCl solution. Free swell index values of bontonite to be added Poly(acrlylic acid), PYA(Polyvinyl Alcohol) or SCMC (Sodium Carboxymethyl Cellulose) were evaluated and compared. From this, it was confirmed that hydraulic conductivities of GCL in seawater were examined and the hydraulic conductivities of GCL in seawater were compared to those in distilled water. The average values of free swell indices of bentonite were decreased in order of distilled water>leachate>seawater. It was shown that no significant differences were occurred for free swell index between seawater and 3% NaCl solution. For bentonite to be added PVA, the other reagents except distilled water didn't affect increase of swelling. Swelling properties of bentonite to be added SCMC were improved except 3% NaCl solution.