• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.41-50
• /
• 2001

The use of clay has been the favored method of reducing or eliminating hazardous contaminants in the leachate from landfills. But, neither natural clays nor organoclays modified with surfactants are able to effectively sorb both heavy metals and organic contaminants. Therefore, the objective of this study is to determine the optimal amount of surfactant added on the clay mineral to effectively remove both of them. For this purpose, Na-Bentonite as the natural clay, and hexadecyltrimethylammonium (HDTMA) as the cationic surfactant were used, Chlorobenzene and lead ($Pb^{2-}$) were selected as representative contaminants. Experimental result showed that chlorobenzene sorption increased with increasing HDTMA to bentonite, ratios. On the contrary, the removal rate of lead decreased as the amount of HDTMA increased. The removal of chlorobenzene was influenced by the amount of HDTMA added to the bentonites rather than initial concentration of chlorobenzene, but the removal of lead was much more influenced by the initial concentration of lead. The adsorption of lead was not affected by chlorobenzene, and vice versa. The competitive sorption between the heavy metal and the organic contaminant was not present.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.55-63
• /
• 2008

A swelling clay should remain physically and chemically stable for a long time to perform its functions as a buffer material of a high-level waste (HLW) repository. The longevity issues in the swelling clay were reviewed to evaluate their importance in the performance of a repository. The review results suggest that an elevated temperature due to decay heat, groundwater chemistry, high pH environment by concrete, organic matter and microbes, radiation, and mechanical disturbance might significantly affect the long-term performance of a swelling clay as a buffer material. This paper will be used as basic informations to design the swelling clay buffer for a HLW repository.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.339-350
• /
• 2007

Content, swelling, concentration, drainage of clay are critical factors that could control rock failures as well as discontinuous geological structures like faults and joints. Especially, the proportional components of clay minerals can be one of few direct indicators to a rock failure caused well by rainfall. Criticality of the role of clay mineral contents gets bigger in the slope and tunnel design. This study, using a horizontal boring core of pelitic/psammitic phyllite from the OO tunnel construction site, aims to investigate mineral composition changes related to fault distribution and their mechanical effects to the activity of these discontinuous layers (i.e., clay-filled fault layers), and eventually to define correlation among rock compositions, weathering products and rock instabilities. Field survey and lab tests were carried out for the composition and strength index of fault clay minerals within the core samples and microscopic analysis of fresh and weathered rock samples.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.582-590
• /
• 1995

우리 나라에서 건설될 중저준위폐기물 처분장의 기본설계개념에 따르면, 중준위폐기물 동굴에는 점토질 뒷채움재가 설치될 예정이다. 이 뒷채움재의 후보물질로는 원료 입수의 용이성 및 경제성 측면에서 천연점토와 분쇄암석의 혼합물이 고려되고 있다. 그러나 이 혼합물이 폐기물처분장의 뒷채움재로 사용되기 위해서는 주요특성들이 뒷채움재의 요구사항을 만족시켜야한다. 이 보고서에서는 경상북도 연일지역에서 산출되는 천연점토와 분쇄암석 혼합물에 대해 핵종유출저지 관점에서 가장 중요한 특성인 수리특성과 방사성핵종 확산특성 및 역학적 특성을 측정하여 뒷채움재료로서의 사용 가능성을 평가하였다. 혼합물의 수리전도도는 동일 밀도에서 점토함량이 감소함에 따라 증가되었으나, 점토함량이 적은 경우에도 상당히 낮은 값을 유지하여 뒷채움재를 통한 핵종이동의 주요 메커니즘은 확산이 될 것이라는 것을 보여주었다. 압축점토에 대한 방사성핵종 복산계수 측정결과, 동일밀도의 나트륨벤토나이트에서 측정된 값의 범위 내에 있었으며, 점토-분쇄암석 혼합물의 액소성한계, 다짐특성, 압축강도및 압밀계수등의 역학적 특성도 나트륨벤토나이트-모래 혼합물에서 얻어진 값과 유사하였다. 이러한 결과들로부터 연일산 천연점토-분채암석 혼합물을 고가의 나트륨벤토나이트 대용으로 처분장 뒷채움재로 사용할 수 있다는 것을 알 수 있었다.

• Journal of Korea Water Resources Association
• /
• v.50 no.11
• /
• pp.715-723
• /
• 2017

Extracellular Polymeric Substances (EPS) in the water environment assemble fine, colloidal particles, such as clays, microorganisms and biomass, in large flocs, which are eventually subject to sedimentation and deposition and determine water/sediment quality and quantity. This study hence aimed to investigate the way that water and colloidal chemistry affects EPS-mediated flocculation of colloidal particles, using a jar-test experiment. Especially, ionic strength, divalent cation and humic substances concentrations were selected as experimental variables in the jar-test experiments, to elucidate their effects on EPS-mediated flocculation. A higher ionic strength increased flocculation capability, reducing electrostatic repulsion between EPS-attached colloidal particles and enhancing particle aggregation. 0.1 M NaCl ionic strength had higher flocculation capability, with 3 times larger floc size and 2.5 times lower suspended solid concentration, than 0.001 M NaCl. Divalent cations, such as $Ca^{2+}$, built divalent cationic bridges between colloidal particles and EPS (i.e., $colloid-Ca^{2+}-EPS$ or $EPS-Ca^{2+}-EPS$) and hence made colloidal particles to build into large, settelable flocs. A small $Ca^{2+}$ concentration enhanced flocculation capability, reducing suspended solid concentration 20 times lower than the initial dosed concentration. However, humic substances, adsorbed on colloidal particles, reduced flocculation, because they blocked EPS adsorption on colloidal particles and increased negative charges and electrostatic repulsion of colloidal particles. Suspended solid concentration in the tests with humic substances remained as high as the initial dosed concentration, indicating stabilization rather than flocculation. Findings about EPS-mediated flocculation in this research will be used for better understanding the fate and transport of colloidal particles in the water environment and for developing the best management practices for water/sediment quality.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.3
• /
• pp.43-54
• /
• 2006

In this paper, the uniaxial, triaxial compression tests and consolidation tests on the clay sample substituted initial pore water for pollutant were performed to evaluate the change in geotechnical properties of the contaminated clay. The contaminant transport analysis on embankment type landfill using the MT3D model was also performed to evaluate the extent of transport and diffusion. There was tendency that strength, compressibility and permeability has increased with the increase in the concentration of NaCl solution. The increase in the strength and compressibility of sample saturated with leachate was higher than samples saturated with NaCl solution, but in the permeability coefficient was lower. As the result of contaminant transport analysis, the predicted concentration was in high with the increase in the initial concentration of $Cl^-$ ion and increased in a non-linear form. The transportation distance calculated with use of regression equation between the distance from contaminant source and the concentration of $Cl^-$ ion was increased with the increase in the initial concentration.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.1
• /
• pp.33-40
• /
• 2002

The study was performed to evaluate the effect of landfill leachate on the hydraulic conductivity of Geosynthetic Clay Liner (GCL) with two types of leachate. GCL used in waste landfills have a significant ability as a barrier material, however, they also have a potential danger when exposed to some organic and inorganic leachate as well as humic materials. In this study, swelling tests and hydraulic conductivity tests were performed to evaluate the effect of humic materials and landfill leachate on the hydraulic characteristics of the GCL. The result of swelling tests showed that the amount of humic materials and high electronic conductivity caused a decrease of the swelling of bentonite. This is expected to increase the hydraulic conductivity of GCL. The increasing of hydraulic conductivity observed for GCL permeated with 0-leachate was significantly higher than that of Y-leachate. This result shows that humic materials are obviously affecting with the increasing of hydraulic conductivity of GCL.

• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.91-101
• /
• 2017

Fault materials has various properties depending on their areas, rock types, and components because they are formed by heterogeneous and complicated mechanisms. In this study, to understand the physical and mechanical properties of fault materials, 109 fault materials distributed in South Korea were collected to conduct various laboratory tests with them and analyze their physical and mechanical properties (unit weight, specific gravity, porosity, gravel content, silt/clay content, clay mineral content, friction angle, and cohesion) according to areas, rock types, and components. As for the physical and mechanical properties by rock type, gneiss shows the highest medians in the unit weight ($17.1kN/m^3$) and specific gravity (2.73), granite does so in the porosity (45.5%), schist does so in the gravel content (20.0 wt.%) and cohesion (38.1 kPa), and phyllite does so in the silt/clay content (54.4 wt.%), clay mineral content (30.1 wt.%), and friction angle ($38.2^{\circ}$). With regard to the physical and mechanical properties by component, fault gouge was shown to have lower values than cataclasite and damage zones in all factors other than porosity and silt/clay contents.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.2
• /
• pp.49-52
• /
• 2008

Most of waste sludge has generally been disposed in landfill site or dumped in the ocean, which will be banned by the content of its heavy metals according to London Dumping Convention in Korea. Therefore, environmentally friend methods are urgently required for the treatment and disposal of the sewage sludge. Thermal hydrolysis is one of the good treatment methods to solve the sludge problems. In this study, the physical and environmental testing was conducted to evaluate the feasibility of by-product cake from the thermal hydrolysis as liner or cover materials in landfill.

• Geotechnical Engineering
• /
• v.13 no.1
• /
• pp.159-168
• /
• 1997

In order to investigate the effect of parameters such as orientation and surface roughness of a reinforcing material as well as the water content of the clay matrix on the stress-strain and failure behavior of reinforced clay, uniaxial compression tests were performed on clay samples reinforced with a steel inclusion Test results showed that the increase or decrease in strength of reinforced clay samples was found to depend on the orientation of a steel inclusion as well as water content of clay samples. The possible weakening mechanism induced by reinforcement in clay samples was related to the development of cracks along the tips of interface between steel inclusion and clay matrix. A theoretical interpretation of failure behavior of reinforced clay was made by using fracture mechanics theory, and the experimental results were compared with the theoretical predictions. The predicted crack propagation direction obtained from fracture criteria for a material containing a closed crack with friction agreed reasonably well with the measured values obtained from tests.