• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.77-88
• /
• 2007

A micromechanics-based model to simulate the elastic and elastic-plastic behavior of granular soils is developed. The model accounts for the fabric anisotropy represented by the statistical parameter of the spatial distribution of contact normals, the evolution of fabric anisotropy as a function of stress ratio, the continuous change of the co-ordination number relating to the void ratio, and the elastic and elastic-plastic microscopic contact stiffness. Using the experimental data for metallic materials, the elastic-plastic contact stiffness is derived as a power function of the normal contact force as well as the contact force initiating the yielding of contact bodies. To quantitatively assess microscopic model parameters, approximate solutions of cross-anisotropic elastic moduli are derived in terms of the micromechanical parameters.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1927-1928
• /
• 2002

기존의 3차원 형상 측정법은 대부분 접촉식이기때문에 피측정물이 손상이 입거나 Probe의 보정이 필요하거나 Probe가 측정면에 직접 닿지 않는 경우는 측정이 불가능하였다. 또한 많은 점을 측정할 경우측정시간이 많이 걸린다. 물체의 크기가 크거나 측정하고자하는 물체가 무를 경우에는 적합하지 못하다. 이러한 단점은 보완하기 위하여 비접촉식인 측정법 이용한 관측이 대두되게 되었다. 비접촉식에 의한 관측은 물체의 표면을 손상시키지 않으면서 정밀하고 고품질이 요구되는 제품 검사 및 자동화 기술의 발달로 인하여 생산 산업 분야에 이용되고 있다 이에 비접촉식 방식에서도 광학간섭의 하나인 마이켈슨 간섭계를 이용하여 간섭무늬 패턴으로 물체 이미지를 분석하고 CCD카메라에서 영상을 얻어 3차원 물체를 해석하였다.

• 한국체육학회지인문사회과학편
• /
• v.58 no.2
• /
• pp.405-416
• /
• 2019

This study aimed to identify the efficiency of short track-related sports injury prevention program consisted of muscle strength and neuromuscular training on non-contact injury incidence and characteristics in knee and ankle joints and low back for elite short track speed skaters. Twenty-five short track athletes who belonged to G-City Team were participated in this study from Nov. 2017 to Jul. 2018. Information on their sports injuries occurred were collected and injury prevention program was applied in their warm-up every training sessions and competition. Also their symptom-level of knee and ankle joint and low back were measured by using OSTRC overuse injury questionnaire and Cumberland ankle instability(CAIT). The injury incidence rate after application of prevention program was 2.79 injuries/1,000 hour exposures(HEs), which was lower than before (3.04 injuries/1,000HEs). The OSTRC score (30.89±28.34 and 23.84±23.61, respectively) in knee and low back after application of prevention program were lower than before (58.47±26.77 and 52.36±21.55, respectively), and the CAIT score (13.47±6.07) in ankle joint after application of program was higher than before (16.26±7.28), which means that their symptom-level was alleviated with sports injury prevention program. In conclusion, the sports injury prevention program designed for short track's motion and characteristic can have positive influences on the occurrence of non-contact injury for short track speed skaters.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.345-352
• /
• 2013

In this research, a study on stress shape functions was conducted to analyze the contact stress problem by using a hybrid photoelasticity. Because the contact stress problem is generally solved as a half-plane problem, the relationship between two analytical stress functions, which are compositions of the Airy stress function, was similar to one of the crack problem. However, this relationship in itself could not be used to solve the contact stress problem (especially one with singular points). Therefore, to analyze the contact stress problem more correctly, stress shape functions based on the condition of two contact end points had to be considered in the form of these two analytical stress functions. The four types of stress shape functions were related to the stress singularities at the two contact end points. Among them, the primary two types used for the analysis of an O-ring were selected, and their validities were verified in this work.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.1 s.71
• /
• pp.47-54
• /
• 2006

In this study, an optimum support design problem is considered to minimize displacement of stacked plates under self weight condition. During the displacement analysis, several kinds of contact arise between the plates themselves and support bar. These can be easily considered if commercial analysis software, which provides capability to solve the contact problem, is used. It is found, however, that the computing time is extraordinarily long due possibly to the generality of the software and also to the ignorance of the control parameters used in the software. In this paper, the contact condition is imposed directly by the authors, while the software is used only to solve the ordinary displacement analysis problem. In this way, the computing time is decreased remarkably by more than 30 times, while yielding the same accurate results. Optimization is conducted based on this efficient analysis method to find minimum number of supporting bars using the response surface algorithm.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.239-247
• /
• 2020

This study is about design and verification of stress reduction of bearings for wind turbines. In a slewing bearing having a typical four-contact structure, the contact point moves to the end of the raceway due to a large moment load, resulting in a stress concentration. A bearing was designed to reduce such contact point movement. The deformation behavior of typical ball bearings and newly designed bearings was calculated through finite element analysis under ultimate load by replacing the ball with a spring element. The contact stress between the ball and the raceway was calculated by finite element analysis by inputting the deformation behavior analysis result as a boundary condition. The effectiveness of the bearing stress analysis method using spring elements was verified through comparison of the contact stress according to the bearing structure.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.115-124
• /
• 2021

The outbreak of covid-19 has brought the characteristics and advantages of non-contact services to increased prominence, and the development of smart hotels"has accelerated. This study aims to identify, categorize and define the smart service experience at different touch points of the customer experience. The concept and characteristics of the smart hotel were examined based on existing research and literature. An analytical framework was designed using smart experience factors and customer touch points of smart hotels. Selected Chinese smart hotels were then examined under this framework. The case analysis results show that the customer experience design of smart hotels has developed to different degrees, in terms of interactivity, personalization, accessibility, information and privacy security. Based on the above findings, this article suggests that the design of smart hotels should use integrated data to further enhance personalized service experience.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.293-298
• /
• 2000

유체의 열전달 측정을 위해 일반적으로 사용되는 방법은 열전대(thermocouple)를 이용한 온도 계측을 들 수 있다. 이 방법은 점계측 방법으로서 측정점 이외의 유체공간에 대한 실시간적 온도 분포를 파악할 수 없으며, 유체의 유동이 열전대에 영향을 받아 실제의 변화와 다른 결과를 나타낼 수 있는 문제점을 가지고 있다.(중략)

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.2
• /
• pp.160-178
• /
• 2023

Diagnosis and analysis of occlusal relationships are important factors in prosthetic treatment. A thorough occlusion analysis and evaluation should be performed before treatment to restore a stable interocclusal relationship. Analysis and evaluation are essential during the treatment process and at regular follow-ups. Recently, with the development of dental equipment and digital processing methods, new quantitative analysis methods that can record the patient's occlusal relationship have been introduced. Among them, the T-Scan Novus (Tekscan Inc., S. Boston, MA, USA) displays the strength of the initial contact point and the occlusal contact point of the teeth using a pressure sensor. With this, occlusal contact time of the teeth, anteroposterior and left-right balance of occlusal force can be compared. The Dental prescale II (GC Co., Tokyo, Japan) scans the occlusal contact point using a pressure-sensing film and analyzes the density of the contact point. It can measure the distribution and strength of the occlusal force of the teeth in the most natural occlusion state. Based on this, appropriate prosthetic treatment (four-unit fixed partial denture, removable partial denture, complete denture, and complete oral restoration cases) was performed according to the area and extent of the patient's tooth loss. The patient's occlusion at the first visit, treatment stage, right after treatment, and regular follow-up were compared and evaluated using a quantitative method for appropriate occlusion analysis using T-Scan Novus and Dental prescale II. This report enhances the understanding of occlusion analysis during prosthetic restoration. The results satisfied both the clinician and patients in terms of function and aesthetics.

• Journal of Astronomy and Space Sciences
• /
• v.16 no.1
• /
• pp.21-30
• /
• 1999

We perform CCD observations in VRI filters for AK Her during 3 nights in Feb 1997 and Mar 1998 at Mt. Sobaek National Observatory, and obtained 236 images in V, 198 in R, and 197 in I filter. From the data, we construct light curves which contain a pair primary and secondary minima and (O-C) diagram. We analyzed the obtained light curves of AK Her using the Wilson-Devinney code. From the analyses, we find that AK Her is more likely detached or semi-detached than contact system. From the (O-C) diagram, we find that the (O-C) residuals increases out of accordance with the expectation of Borkovits & Hegedus since 1990. However, we cannot identify cause of the periodic variation of the (O-C) residuals.