• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.89-101
• /
• 2017

Crime occurs differently based on not only place locations and building uses but also the characteristics of the people who use the place and the spatial structures of the buildings and locations. Therefore, if spatial big data, which contain spatial and regional properties, can be utilized, proper crime prevention measures can be enacted. Recently, with the advent of big data and the revolutionary intelligent information era, predictive policing has emerged as a new paradigm for police activities. Based on 7420 actual crime incidents occurring over three years in a typical provincial city, "J city," this study identified the areas in which crimes occurred and predicted risky areas. Spatial regression analysis was performed using spatial big data about only physical and environmental variables. Based on the results, using the street width, average number of building floors, building coverage ratio, the type of use of the first floor (Type II neighborhood living facility, commercial facility, pleasure use, or residential use), this study established a Crime Incident Prediction Model (CIPM) based on Bayesian probability theory. As a result, it was found that the model was suitable for crime prediction because the overlap analysis with the actual crime areas and the receiver operating characteristic curve (Roc curve), which evaluated the accuracy of the model, showed an area under the curve (AUC) value of 0.8. It was also found that a block where the commercial and entertainment facilities were concentrated, a block where the number of building floors is high, and a block where the commercial, entertainment, residential facilities are mixed are high-risk areas. This study provides a meaningful step forward to the development of a crime prediction model, unlike previous studies that explored the spatial distribution of crime and the factors influencing crime occurrence.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.441-451
• /
• 2019

This study was conducted to investigate the crop characteristics of 181 sweetpotato germplasms collected from Korea and overseas. The longest shoot vine length was observed in IT232211 (354.8 cm) and the shortest shoot vine length was observed in IT232185 (32 cm). The maximum numbers of shoot branches and nodes were produced by IT232091 (23.0) and IT232174 (67.8), respectively. Differences in Rapid Visco Analyser profiles were observed for pasting parameters such peak, trough, final, breakdown, and setback viscosities; and pasting temperature. The peak and breakdown viscosities were highest in IT232050 and IT232010, at 338.3 and 207.2 Rapid Visco Unit (RVU), respectively. The trough viscosity was lowest in IT232019 at 103.8 RVU. IT232101 had the highest final viscosity (284.6 RVU), and IT232192 had the highest setback viscosity (81.7 RVU). IT232197 had the highest pasting temperature at 86.8℃, and that of IT232134 was lowest at 72.7℃. To evaluate functional substance content, we analyzed 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and total polyphenol content. The highest frequency proportion of starch was in the 10%-15% range (50.8% of the plants), followed by the 5%-10% range (38.1% of the germplasms). Sugar content ranged from 13.5 to 33.3% (23.2% on average); the highest frequency proportion of sugar was in the 20%-25% range (56.9% of the germplasms), followed by the 25%-30% range (25.4% of the germplasms). The highest frequency proportion of water was in the 70%-80% range (52.5% of the germplasms), followed by the 60%-70% range (44.2% of the germplasms). Our results provide basic data for the selection of useful resources and for the development of new sweetpotato varieties.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.60-77
• /
• 2021

From 2007 to 2011, four Goryeo Dynasty vessels, namely the Taean treasure ship, Taean Mado Shipwreck No.1, No.2, No.3 were discovered in Taean area, Chungcheongnam-do province. From the shipwrecks, 175 pieces of mokkan (wooden tablet) were excavated. These mokkans are the only case of Goryeo Dynasty and represent the unique usage of mokkan as cargo tags, after the paper replaced the wooden tablets as writing materials. The Taean mokkans provide details, such as the year, recipient, port of origin, types of the cargo, quantity and unit, the name of the responsible person for shipment. Thus, they enable us to speculate about the characteristics of the cargo. Furthermore, through studying the writing style, form, material and manufacturing method, researchers can extract which form and characteristics were favored at that time. The Taean mokkans have no preset style for writing. Therefore, they can be written selectively and freely. And since the mokkan were attached to cargos, mokkans with furrows on upper side were favored, and efficiency and simplification of the manufacturing process were priorities in making mokkans. The Taean mokkans can be compared to those from the Shinan ship and the Quanzhou ship because those are of the same era and use. On the writing styles and information, Chinese mokkans are focused on the cargo owners, while The Taean mokkan includes more detailed information, such as the recipients. In forms, Chinese mokkans have maximum thickness of 1.0 centimeter and have pointed edges in lower parts, while mokkans from Taean do not have fixed thickness or edges. Furthermore, Chinese mokkans and Korean mokkans have different styles from manufacturing methods and material selections. These differences between Chinese and Goryeo mokkan are related to the differences between littoral-transport Goryeo ships and ocean-transport Chinese ships, such as shipping distances, types of cargo, shipping systems, packing methods, and transport operators. At the moment, because there are only small amount of data and materials of Chinese mokkan, comparative studies regarding Goryeo and Chinese mokkan can only be fragmentary. However, this article can be a base from which to expand the scope of Goryeo mokkan studies.

• Journal of Internet Computing and Services
• /
• v.22 no.4
• /
• pp.83-98
• /
• 2021

The purpose of this study to find the factors influencing the fire alarms using IoT firefighting facility management system data of Seoul Fire & Disaster Headquarters, and to present academic implications for establishing an effective prevention system of fire situation. As the number of high and complex buildings increases and former bulidings are advanced, the fire detection facilities that can quickly respond to emergency situations are also increasing. However, if the accuracy of the fire situation is incorrectly detected and the accuracy is lowered, the inconvenience of the residents increases and the reliability decreases. Therefore, it is necessary to improve accuracy of the system through efficient inspection and the internal environment investigation of buildings. The purpose of this study is to find out that false detection may occur due to building characteristics such as usage or time, and to aim of emphasizing the need for efficient system inspection and controlling the internal environment. As a result, it is found that the size(total area) of the building had the greatest effect on the fire alarms, and the fire alarms increased as private buildings, R-type receivers, and a large number of failure or shutoff days. In addition, factors that influencing fire alarms were different depending on the main usage of the building. In terms of time, it was found to follow people's daily patterns during weekdays(9 am to 6 pm), and each peaked around 10 am and 2 pm. This study was claimed that it is necessary to investigate the building environment that caused the fire alarms, along with the system internal inspection. Also, it propose additional recording of building environment data in real-time for follow-up research and system enhancement.

• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.61-74
• /
• 2010

Flour characteristics of 26 Korean wheat cultivars (KWC) were evaluated to assess consumer satisfaction with 6 imported wheat and 5 commercial wheat flours. In physical characteristics of flours, Particle size of SW (soft white) was similar to Dahong, Geuru, Milsung, Olgeuru, Seodun, Tapdong, and Uri. DNS (dark northern spring) was similar to Jeokjoong, Joeun, Sukang, and Younbaek. Ash and damaged starch content of KWC was similar to that of imported wheat and commercial flour (Com), but lightness value ($L^*$) were lower than those of Com. Particle size of flour positively correlated with ash, damaged starch, and lightness value ($L^*$) of flour. L ($^*$) value of flour negatively correlated with ash, damaged starch, and particle size of flour. In protein characteristics, Protein content of SW and commercial flour for baking cookie (Com5) was similar to Baekjoong, Jinpoom, Milsung, Olgeuru, Saeol, and Uri. HRW (hard red winter) and commercial flour for baking bread (Com3) was similar to Hanbaek, Joeun, Jopoom, Keumkang, and Sukang. SDS sedimentation volume based on a constant flour weight (SDSS) of KWC was lower than those of DNS and Com3. Mixograph water absorption of KWC similar to imported wheat and Com. Mixing time and maximum dough height (Hm) of KWC were higher than those of imported wheat and Com. Protein content positively correlated with SDS sedimentation volume and water absorption of mixograph. SDS-sedimentation volume positively correlated with water absorption of mixograph, mixing time of mixograph, and height of dough development. In starch characteristics of flour, ASW (Australian standard white) flours showed lower amylose content, higher peak viscosity, breakdown, and setback in pasting properties than other flours. KWV flours showed higher amylose content and lower peak viscosity than those of AH (Australian hard), ASW, commercial flour for making white salted noodles (Com1), commercial flour for making yellow alkaline noodles (Com2), and Com3.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.148-173
• /
• 2012

The rear garden in Donggwol Palace which shared with the Changdeok Palace and the Changgyeong Palace is the salient places of technology and idea reflected the phases of the times of the Joseon Dynasty, so it is certainly one of the best Korean garden cultures. The rear garden in Donggwol which was not only the secret garden for the rest of royal family but also used as symbolic places for the various ceremonies and training its human resources has been considerably destroyed through the period of Japanese colonial rule. Thus the rear garden areas at north of Changkyung Palace were entirely transformed and a few territory from Juhabru(宙合樓) to Ongnyucheon(玉流川) keep up its surviving as the rear garden. The area of Jondeokjeong(尊德亭) which become subject on this studies from among these was constructed as flower garden after development of Ongnyucheon. The areas of Simchujeong(深秋亭), Cheoknoedang(滌惱堂), Pyemwoosa(?愚?), Mangchunjeong(望春亭), Chunhyagak(天香閣), Chungsimjeong(淸心亭) around Jondeokjeong, were situated among the beautiful scenery with the flowers and ponds. But there are only Jondeokjeong and Pyemwoosa at this moment, and the other pavilions was destroyed and transformed. For these reasons, in this studies, the formative purposes were investigated through analysing water elements, planting, ornaments and so on. According to these reasons, historical records and realities of garden construction of five pavilions : Simchujeong, Mangchunjeong, Cheoknoedang, Chunhyagak, Chungyeongak(淸燕閣) were considered to give authenticity to the restoration and reorganization as well as to accumulate basic knowledge about the conservation of environment surrounded garden architectures. These pavilions appeared at Gunggwolgi(宮闕志) and Joseonwangzosilok(朝鮮王朝實), but their names were not appeared at Donggwoldo(東闕圖). So they were ascertained through all of literatures on Donggwol Palace. Cheoknoedang and Simchujeong among these buildings could be found out as the existed buildings and the uncertain building at the northwest of Jondeokjeong was estimated as the name to Chunhyagak or Mangchunjeong. And the hypothesis that the wall surrounding Taichungmoon(太淸門) should be belong to Chungyeongak was supported. In addition, the area which did not known in connection with name and use on northeast at the Changdeok Palace, and had regarded as an impasses in the studies of Donggwoldo and the rear garden in Donggwol Palace, but the historical records of using by Yeonsangun(燕山君) and Sukjong(肅宗) were discovered at this study. And it could be uncovered that the obscure spatial space was a separate house only for king and he enjoyed play there unnoticing to others belong to palace.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.3
• /
• pp.4-23
• /
• 2021

The purpose of this study was to classify the types of tweezers used across time and to examine the social culture of periods through the use of tweezers. Chapter II summarized the terms for tweezers and looked at the use of tweezers in two cases related to the social culture and politics of a period. The first is the use of tweezers for beauty purposes. Men used tweezers as a kind of self-management to maintain their social status and power, and thus they helped develop a wide range of tweezers cultures. People with gray hair are usually old. The perception that we should step down from politics when we are aged has become strong. Therefore, politicians pulled out gray hairs with tweezers to maintain only black hair and show youth, which indicates that their social influence is still strong. The second is the use of tweezers for first aid. Chapter III classified tweezers by type during the Goryeo and Joseon periods. The tweezers are largely divided into basic and composite types. The basic type of tweezers is a form that has been continued since the Three Kingdoms Period and consists of tongs and handles, and a fixed type of tweezers with a fixed ring appeared. Composite tweezers are made by grafting earpick or multipurpose knives. Composite tweezers are all-in-one tweezers with an earpick and an all-in-one knife. Tweezers are usually all-in-one. Among the composite tweezers, rivet separation and ring separation are characterized by separation, unlike the all-in-one tweezers. The method of connecting is divided into rivets and connection rings. The all-in-one tweezers appear only during the Goryeo Dynasty and are characterized by the lifestyle that provides a glimpse of the tastes of contemporary users. The manufacturing takes shape after making a thin metal plate. Decorative techniques are carved on soft metal tweezers, such as silver and bronze with a line, point, and a pressed angle. These tweezers are presumed to have been used by the royal family or aristocrats. However, most tweezers are made of strong bronze or iron. Therefore, the majority of simple X-shaped patterns are sampled or without patterns. The biggest reason why there are such diverse types of tweezers is that the culture of tweezers was widespread regardless of the times. In addition, the basic type of tweezers has been used since the Three Kingdoms Period and has been modified and used together as necessary because the shape of tweezers is a practical daily tool. Study of metal crafts have been limited to royal objects and Buddhist crafts. We hope that research on everyday tools such as tweezers will continue to serve as an opportunity to examine the social and cultural aspects of the times in various ways.

• Korean Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.272-279
• /
• 2011

Copper cyanide is a chemical produced in large quantities with 2,500 tonnes being produced in 2006. It is mainly used for electroplating copper, particularly alkali-Cu plate and brass plating. The purpose of this study is to reassess the physicochemical properties and environmental fate of copper cyanide based on reliable data and and to conduct an ecotoxicity test according to the OECD test guidelines as an initial environmental risk assessment (need to state where this was done). Metal containing inorganic substances are not subject to degradation, biodegradation or hydrolysis. Aquatic toxicity tests of copper cyanide were conducted according to OECD test guideline 201, 202 and 203 for green algae, daphnia, and fish, respectively. The following acute toxicity test results were obtained for aquatic species: 0.089 mg $L^{-1}$ (Algae, 72 Hr-$EC_{50}$); 0.21 mg $L^{-1}$ (flea, 48 Hr-$LC_{50}$); 0.62 mg $L^{-1}$ (Fish, 96 Hr-$ErC_{50}$). The chemical possesses properties indicating a hazard for the aquatic environment (acute toxicity in fish, daphnia and algae below 1.0 mg $L^{-1}$). As a result of this study, copper cyanide has become a candidate for detailed risk assessment. Countries that produce this chemical in significant quantities are recommended to perform specific assessments.

• The Korean Society of Law and Medicine
• /
• v.16 no.1
• /
• pp.155-190
• /
• 2015

The court sentenced meaningful decisions related to the medical service in 2014. The court assumed the negligence of medical staff in the accident if being broken while using the medical equipment for not an original purpose at the time of surgery and ruled that the compensation for damage can be recognized in recognition of the causal relationship between the explanation duty violation and side effect's happening when unproven surgery on safety is implemented regarding the duty of explanation, that in the case of cosmetic surgery, the subject on the duty of explanation needs to be expanded compared to the general medical practice and that the duty of explanation cannot be accepted for the range that cannot be expectable. Also, the court has provided the requirement and limitation of self-determination exercise in case of the crash between patient's self-determination and doctor's duty of care and has ruled that as automobile insurance contract is a contract with the insurance company to pay regarding liability for car accidents, treating patients and taking the insurance money is not illegal activity even for the unlicensed hospital violating the medical law while established. The judgment stating the opinion that medical practitioners cannot be punished according to the medical law prohibiting the receiving of rebate in case that medical practitioners did not receive benefit while the medical institution itself gained an unfair economic benefit also stands out. And the court has ruled that even if the medical institution who received a business suspension is closed, the suspension is still effective in case that the same operator opens a new medical institution in the same place, ruled on the requirement to conduct a medical service outside of the medical institution that the doctor opened and ruled that the administrative penalty cannot be conducted prior to the conviction on charge of violating the medical law.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.2
• /
• pp.124-130
• /
• 2016

In this study, agronomic characteristics and fatty acid composition of 121 flax (Linum usitatissimum L.) germplasms were analyzed. The flax germplasms had a fairly short growth period of 75-95 days. The plant height at maturity varied from 52 to 124 cm. The flower color varied from white to lilac and even purple. Early flowering flax germplasms had white flowers and were resistant to lodging. In early flowering flax germplasms, all agronomic characteristics, including growth period, plant height, branch number per plant, stem diameter, number of capsules per raceme, seed number per capsule, 1000-seed weight, and seed yield, were decreased. The average fatty acid composition of 121 flax germplasms comprised palmitic acid (5.3%), stearic acid (4.3%), oleic acid (29.7%), linoleic acid (13.1%) and linolenic acid (46.4%). The total content of unsaturated fatty acids ranged from 84~94% with an average of 88%. Among the fatty acids, linolenic acid (omega-3) content was the highest with a range of 36~54%. In five selected flax germplasms (Hollandia 1803, Red son, C & F Res Br 1767, Wiera, and Ireland 1657) with high linolenic acid (${\geq}51%$), total lipid and protein contents were 30~36% and 5.4~6.9%, respectively. Overall, flax can practically be adoptable into cropping systems in South Korea and utilized as a scenery crop, since flax has a short cultivation period with diverse flower colors.