• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.435-439
• /
• 2002

This paper describes a design and fabrication of an electronic ballast for 70[W] ceramic discharge metal halide lamps. The proposed ballast is composed of a rectifier, an active power factor correction circuit (PFC), a half-bridge inverter, a LC resonant circuit and a microprocessor. The developed ballast also includes a specially designed time circuit which provides reignition of lamps. Running frequency of the ballast is set at 40[kHz] to avoid acoustic-resonance and flickering. From the experimental results, input power factor and efficiency of the ballast are estimated 99.8[%] and 93.1[%)] respectively.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.42-50
• /
• 2002

In this paper, we have designed and implemented lamp control system in underground parking place using WWW. The proposed system consists of lamp control system which is connected by RS-485 communication bus and monitoring system (WebPL) which can provide web interface using the web server. The lamp control system is controlled through a user command within the monitoring system (WebPL), senses moving object and turns lamps in underground parking place on or off. The monitoring system displays the status values of on or off received from lamp control system on the web browser and can real-timely control lamps in underground parking place on the web browser. 

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.14-20
• /
• 1999

This paper presents a design techniques for an electronic ballast of HID lamps. An electronic ballast for HID lamps usually employs a high-frequeocy resonant inverter and voltage-to-frequency converter to control the outpIt and a half-bridge and series resonant circuit are chosen for the ballast First, to design PI controller, the inverter with V/F converter is modeled with a transfer function and the controller PI gains are determined. This paper shows that an integral controller is only needed to control the current. Second, a se1f-feedback controller is proposed. This structure, simple and robust, is analyzed and a feedback gain is determined by using the inverter model. Experirrental system is built with a commercial 250W high pressure sodium lamp and the results show a validity of the proposed ballast and the total efficiency is increased by 5%.

• Information and Communications Magazine
• /
• v.29 no.9
• /
• pp.44-49
• /
• 2012

멀티미디어 및 네트워크 관련 기술의 발전에 힘입어 최근의 멀티미디어 단말은 높은 품질의 영상 및 음향 데이터를 처리할 수 있게 되었다. 이러한 멀티미디어 데이터는 디바이스의 내장스토리지에 저장되거나 혹은 인터넷 기반의 스트리밍으로 전송될 수 있으며,또한 홈 네트워크 미들웨어를 통한 전송이 가능하다. 이 중 홈 네트워크 미들웨어를 통한 전송의 경우 홈 네트워크의 콘텐츠 공유 및 제어를 위한 별도의 설정이 필요 없으며, 콘텐츠 공유에 대한 보다 직관적인 인터페이스를 제공하고, 콘텐츠의 물리적인 복제가 불필요한 점등에 힘입어 멀티미디어 콘텐츠 공유에 대한 표준으로 자리잡고 있다. 또한 이러한 홈 네트워크 미들웨어는 단순한 멀티미디어 콘텐츠 공유 및 제어 뿐만 아니라 기기간의 자동 설정을 위한 기기간 통신(Machine-to-Machine Interface)으로의 확장이 진행되고 있다. 본고에서는 산업계에서 널리 사용되고 있는 스마트 홈 네트워크 미들웨어의 업계 표준과 그 확장성에 대해 알아본다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.1058-1060
• /
• 2017

본 논문에서는 고속도로에서의 방향성을 고려하여 저전력형 가로등 제어 시스템을 설계하고 구현했다. 본 연구에서 제시한 시스템은 조도 센서와 적외선 센서를 이용해 디밍이 가능하고, 차량의 이동 방향에 따라 해당 방향의 가로등이 점등되는 시스템으로 야간에서 가로등에 소비되는 전력량을 줄여 에너지 효율을 향상시킬 수 있음을 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.770-771
• /
• 2017

스마트폰 어플로 구글의 STT API를 이용하여 음성인식을 적용한다. 이는 문자열로 변환하고 블루투스 통신을 통하여 아두이노 RC카로 정보를 전달하여 동작하도록 제어한다. 아두이노 RC카에 부착한 라인센서와 초음파센서를 통해 차선변경의 유/무와 앞/뒤 차량 간의 거리를 측정하여 비상등을 자동으로 점등할 수 있도록 한다. 본 연구의 결과로써 운전자간의 예의범절을 갖춘 운행과 초보운전자들의 미숙한 상황대처를 보완할 수 있을 것으로 기대된다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.30-40
• /
• 2002

This paper studies the electronic ballast development for 250w MH lamps. We have improved the input power factor using a PFC IC. To provide the rating voltage required In the lamps, we have used the buck type dc-dc converter By this method, the stress of switching devices in inverter can be reduced. The inverter is the Full-Bridge type. To eliminate the acoustic resonance phenomena of MH lamps, we have added the high frequency sinewave voltage to the low frequency square-wave voltage to the lamp. We hove developed the igniter circuit using the L, C devices. We could control dimming of the lamp by varying the output voltage of the buck converter. The time of illuminating lamps and luminous intensity could be adjusted by season and time band. The buck converter output voltage can be controlled and the no load and over current situation were Protected by the development of the microprocessor Program.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2516-2522
• /
• 2014

Our country has a convoluted coastline and the marine weather fluctuates locally, so it needs effective AtoN operation for the safe navigation of vessels and fishing boats sailing the coast. Especially, large beacon must ensure the safety of the vessels and always lit at night. If large beacons installed in the lighthouse are not lit, vessels can not assure their location. Thus the accidents is likely to occur, which can cause great economic damage. In this paper, we developed a monitoring system of large beacon to monitor and control the status of information. This system was designed for a special purpose of taking precautions against possible accidents on the sea.

• Fire Science and Engineering
• /
• v.16 no.2
• /
• pp.1-7
• /
• 2002

In the normally, exit sign is always lighting on status by the connected to normal electrical source. So, there are happened to rise of the economical cost such as power consumption, maintenances and repair replacement of lamp etc. This paper are study on the new exit sign circuits by using high efficiency LED that is available for remote control and reduceible to power consumption, maintenance cost by the way of compensation fluorescent and incandescent lamps. As a results on the study, exit sign lamp is capable of control and supervisory in trigger angle by the remote control switch, widely and easily. And then, the response time was very fast in 600〔$\mu$s〕and also it can be find that the rising and fall time of oscillate circuit is maximum 200〔ns〕 as high sensitively. Finally, it obtain to the result that reducible of electrical power consumption and not required for replacement of lamp by using the high efficiency LED lighting source.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.59-65
• /
• 1997

This paper proposes a new approach for the design of a multi-output electronic ballast for fluorescent lamps of different outputs and control method. At first, a standard-output electronic ballast is constructed and then fluorescent lamps with different outputs are lighted by the frequency control of inverter circuit using MeV. This multi-output electronic ballast consists of a rectifier circuit, an inverter circuit, and a frequency control circuit to determine the optimal frequency for the lamps of different output. In order to verify the proposed design method, a prototype of a multi-output electronic ballast for 11 [WJ. 15[WJ compact fluorescent lamps and 20W fluorescent lamp is constructed. Results of observing the voltage and current characteristics of lamps are in accord with those of PSpice simulation. Also its efficacy is nearly the same as the other electronic ballasts. From the result, therefore, validity of the proposed design method of a multi-output electronic ballast for fluorescent lamps is verified.