• Superconductivity and Cryogenics
• /
• v.19 no.2
• /
• pp.6-10
• /
• 2017

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.655-661
• /
• 1997

Base-isolation of a primary structure generally decrete the seismic response of its own and the secondary structure. It may cause an adverse effect on the seismic response of secondary system when the system is submerged and subject to a considerable hydrodynamic effect. In this paper, it is shown how, and how much, the base isolation of the primary structure can affect the secondary system response in extreme cases through dynamic analysis of a simplified coupled model for a submerged secondary system and a base-isolated primary structure. As an aseismatic design approach to reduce the response of the submerged system, optimization of the fluid gap, which controls the hydrodynamic mass effect, is performed. As an alternative approach in case where the control of fluid gap is unrealistic, application of base isolation to the submerged system is suggested. Effectiveness of various combinations of the primary base and secondary base isolations are compared.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.7
• /
• pp.575-582
• /
• 2018

The spaceborne cooler is applied to cool down of the focal plane of the infrared detector of the observation satellite. However, this cooler induces unnecessary micro-jitter which can degrade the image quality of the high-resolution observation satellite. In this study, we proposed a multi-layered blade type vibration isolator to attenuate micro-vibration generated from a spaceborne cooler, while assuring structural safety of the cooler under severe launch loads without an additional launch-lock device. The blade of the isolator is formed with multi-layers in order to obtain durability against fatigue failure and an adhesive is applied between each layers for granting high damping capability under launch vibration environment. In this study, the basic characteristics of the isolator were measured using the free-vibration test. The effectiveness of the isolator design was demonstrated by launch vibration test at qualification level.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.121-127
• /
• 2009

This paper reviews a basic data of the surface discharge characteristics for tefton resin in not only pure $N_2$, $N_2:O_2$(80[%]:20[%], I-Air) and $N_2:O_2$(60[%]:40[%]) mixture gas as environment-friendly insulation Gas also $SF_6$. Used electrodes are Knife to Knife. With the changing distance of electrodes and pressure, we can find it, surface discharge voltages and surface dielectric strengths, respectively. Surface discharge Voltages of I-Air are more higher than the other $N_2/O_2$ mixture gases. Moreover, we can obtain that the surface dielectric strengths of $SF_6$ are two times about I-Air, approximately.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.4
• /
• pp.86-91
• /
• 2009

Indirect Touch switch which detects the change of capacitance around the electrode of QT113H chip from QPROX is designed and assembled. Sensitivity analysis of dielectric materials which prevents electrodes from direct touch is performed and the results are displayed in tables and graphs. Glass, acryl, and MDF is used to insulate the electrode and to measure the operating sensitivity of indirect touch switch. While the difference of permittivity of the dielectric materials are large, it is confirmed that the operating sensitivity of each dielectric materials are not so large as the differences of those of dielectric materials.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.272-279
• /
• 2005

In this study the optimal isolation system for the prototype HIFD(high impulsive force device) is investigated. For this purpose, firstly, the dynamic behavior of a human body and a transmitted force under specific operation conditions are analyzed through a series of experimental works using the devised test setup. In order to design the optimal dynamic absorbing system, the parameter optimization process is performed using the simplified isolation system model based on the experimental results of linear impulse and transmitted force. Finally, under the parameters satisfying the constraints of the buffering displacement and the transmitted force, the performance of the designed isolation system for the prototype HIFD is evaluated by experiment.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.184.2-184.2
• /
• 2012

위성의 전장품은 전기적 접속을 위해서 1:1 연결을 하는 Point-to-Point 버스 방식과 여러개의 Slave (Remote Terminal)을 갖고, 일반적으로 1개의 Master (Controller)에 의해서 연결하게 되는 버스 구조를 갖는 접속 채널을 통해서 연결이 된다. 가장 많이 사용되는 방식인 MIL-STD-1553B는 데이터 전송속도가 1Mbps이고, Transformer에 의해서 완전하게 버스와 각 전장품이 완전하게 절연이 되는 구조로, 전기적 고장이 전달되는 것을 방지할 수가 있지만, 설계의 난이도가 높다. 고속 버스는 SpaceWire를 사용하고, 100Mbps이상의 속도를 지원할 수가 있지만, LVDS등의 고속 채널 설계 및 노이즈에 민감한 특성 때문에, 저속의 통신채널에서는 사용하기 어렵다. 저속의 데이터 채널을 위해서는 UART 방식이 사용된다. UART 방식은 RS-422 방식과 RS-485 방식이 사용되지만, 1553B 또는 SpaceWire 등과 같이 프로토콜이 정해지지 않아서, 사용자가 직접 프로토콜을 지정해야하는 문제가 있다. 또한 RS-422은 1:1 방식의 Point-to-Point UART를 위해서 사용되고, RS-485는 버스 방식의 연결을 지원할 수가 있지만, 동시에 여러개의 TX가 enable되는 경우에는 TX사이에 고장을 일으킬 수 있어서, 1번에 TX가 1개만 사용되도록 제어할 필요가 있다. 또한 RS-485방식의 버스를 구현할 경우에는 1553B처럼 와전하게 절연이 불가능하므로, 전기적이나 기능적으로 485버스에 문제가 발생할 경우에 절연과 같은 기능이 지원되도록 구현이 되어야 한다. 본 논문에서는 안정적인 485 UART버스 구현을 위한 기술에 대해서 평가하고 분석하도록 하겠다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.47-52
• /
• 2008

In this paper partial discharge were simulated by conducted particle, a fine protrusion, surface discharge, which could be easy accumulated charge and concentrated electric field in the model GIS. In this times this paper measured and analyzed the radiated electromagnetic waves by using spectrum analyzer and antenna ($30{\sim}2,000[MHz]$ for measurement of EMI EMC in accordance with occurrence and propagation of partial discharge. In the basis of this results, a novel UHF(Ultra High Frequency) spherical sensor is presented. The measured impedance bandwidth of the proposed antenna is from 0.3[GHz] to 1.7[GHz]. Form results of this study, this antenna will be playing an important role for the sensor for insulation diagnosis system by UHF method of real site GIS and power equipment using $SF_6$ gas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5188-5193
• /
• 2011

This research is for temperature control of insulating oil inside the transformer. After I designed and manufactured various systems using Peltier element, which was thermal element, and Heat pipe, which was a cooling system, without electric power. The optimum system could be made by applying them to the temperature control for the insulating oil. I could verify that the combination type of Heat pipe 100 W+ Peltier 100W has a more outstanding capacity than pure Heat pipe 300 W within 60 degrees Celsius through experiments. Through this, I verify that the method of a proper design is prominent, and make an attempt at contribution to power saving effect and more effective control of Distributing board by using this combination type.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.198-198
• /
• 2004

압전 구동기는 여러 가지 적용에 있어서 높은 응답 속도와 큰 힘, 작은 크기 둥의 장점을 가지고 미세 구동에서 독보적인 위치를 차지하고 있다. 하지만, 히스테리시스, 크？ 등의 압전 소자 자체의 비선형성과 이의 구동을 위한 증폭기 등의 한계로 압전 소자의 동적인 특성은 비교적 열악한 것으로 알려져 있다. 특히, 구동 속도가 빨라질 수록 히스테리시스 곡선의 모양이 달라게 되어 구동 궤적의 정확한 예측이 어려우며, 증폭기의 최대 발생 전류가 충분치 않을 경우 압전 구동기가 지령치를 따르지 못하게 된다.(중략)