• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.311-311
• /
• 2011

$TiN{\times}$박막은 우수한 내마모성 및 내부식성, 높은 경도 그리고 열적 안정성 등으로 인하여, 절삭공구 및 기계적 부품의 하드코팅, 2차 연료 전지용 확산방지막의 코팅재료로서 광범위하게 사용되어지고 있다. 일반적으로 $TiN{\times}$ 박막은 화학 기상 증착법(CVD)을 이용하였으나, 최근에는 대면적에 균일한 코팅이 가능하고 기판과 박막상의 부착력이 우수하며, 프로세스를 제어하기 쉬운 물리적 기상 증착법(PVD)의 스퍼터링법에 대한 관심이 고조되고 있다. 그러나 스퍼터링법으로 증착된 $TiN{\times}$ 박막의 물성은 주상구조와 국부적 표면결함을 포함하는 박막의 미세구조에 의존하기 때문에 주상구조 사이에 존재하는 Void 와 Pinhole 그리고 crack들이 원인으로 작용하여, 내부식성 및 기계적 특성이 급속도로 저하되는 단점이 있다. 이러한 단점을 보완하기 위해서, 본 연구에서는 기판온도를(RT, $200^{\circ}C$, $400^{\circ}C$)증가시켜 실험 하였다. 이는 온도증가에 따른 박막의 치밀화가 이루어지고 결함이 감소하여 내부식성 특성향상이 기대되어진다. 또한 플라즈마 밀도를 높이기 위해서, 기존 DC 마그네트론 스퍼터링법에 전자기장을 추가로 인가하였다. 이는 플라즈마 밀도증가에 따른 고반응성의 질소 래디컬의 생성율 증가에 기인하여 박막 형성시 질화반응을 촉진시킴으로써 박막의 치밀화 및 내부식성 특성향상이 기대되어진다.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.25-31
• /
• 2006

This paper studies the field applicability of the Special Chemical grouting Method (SCM) in reinforcing and reducing permeability of the back of an existing continuous wall. SCM uses double rod which imposes intermediate pressure ($981{\sim}9,810kPa$) to disturb, cut, discharge, and mix the ground. It is observed that a bulb is formed by using cement paste and environmentally friendly injection materials with minimal alkali leaching. Uniaxial compression tests, test for chemical properties and fish poison test are performed. Test results indicate that the method results in higher durability, less leaching through the use of the environmentally friendly injection material and faster mobilization of the strength. In addition, field tests confirm the formation of the bulb and the seepage cutoff wall.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.2
• /
• pp.33-40
• /
• 1984

Chatter is a relative vibration between workpiece and tool in machining of metals, and is an important limiting factor of production rate and surface quality, and also reduces the life of machine-tool itself and its tool. In this study, in order to suppress the machining chatter, the spring and the rubber damper are adopted to the tool post of a lathe. The results obtained in this experimental study are summarized as follows. 1. The spring and the damper employed in the tool post for the suppression of chatter increase the maximum chatter-free depth of cut and optimum values found for spring constant and compressive strain are 95kg/mm, 0.1954 respectively. 2. On the optimum condition resulting in this experimental study, the modified tool post increased 6 times in the maximum chatter-free depth of cut as compared with the conventional tool post.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1988.06a
• /
• pp.43-48
• /
• 1988

보호피막을 입히는 방법으로는 화학증착법과 물리증착법이 주로 사용되고 있다. 고온 분위기에서 기체 상태인 반응물의 화학반응을 통하여 원하는 물질을 증착시키는 화학증착법은 물리증착법에 비해 점착성(adhesion)이 우수하고, 보호피막층의 성분조절이 용이하며, 반응물이 기체상태이므로 대량생산이 용이하여 보호피막 증착법으로 많이 사용되고 있다. $Si_3N_4$-TiC ceramic 표면에 TiC, TiN 및 Ti(C, N) coating을 함으로써 얻을 수 잇는 장점들은 표면층의 경도를 증가시키며, steel과의 마찰계수의 감소 및 coating 층 자체가 고온에서 고체 윤활제로 작용하여 마찰열의 상당한 감소를 얻을 수 있으며, 또한 coating층 자체가 비교적 안정한 화합물로 피삭재내의 성분원소들에 대한 diffusion barrier로 작용되며, 내식성을 증가시킬 수 있다. 본 연구에서는 각 증착층의 미소경도, 열충격저항, steel과의 마찰계수를 측정하였으며, 최종적으로 절삭시험을 통하여 증착층들의 내마모성을 조사, 규명하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.256-257
• /
• 2015

마그네슘 합금은 낮은 비중, 높은 비강도, 주조성 및 절삭가공성, 치수안정성, 내흠집성이 우수한 특성을 지니고 있는 경량금속으로써 우수한 주조성과 상온강도, 연신율을 나타낸다. 최근에는 마그네슘 합금을 사용한 IT 기기의 케이스 및 자동차 내, 외장 부품 등의 제품이 다양하게 출시되어지며 금속 질감의 감성 기능까지 적용시킨 전자 기기 제품에 대한 수요가 급증하고 있는 추세이다. 하지만 마그네슘 합금의 낮은 부식 저항성은 마그네슘 합금을 적용시킨 제품에 큰 단점으로 작용되고 있으며 이를 해결하기 위한 연구가 활발히 진행 중이다. 본 연구에서는 플라즈마 전해산화법과 실리카 졸-겔 코팅법을 이용하여 마그네슘 합금의 내부식성을 향상시킴과 동시에 금속질감의 감성 기능을 구현하고자 하였다. 플라즈마 전해산화 공정으로 형성된 산화피막층과 $SiO_2$ 코팅으로 형성된 코팅층의 표면과 단면에 대해서는 FE-SEM(Field emission Scanning Electron Microscope)과 FE-TEM(Field emission Transmission Electron Microscope)으로써 확인하였고 전기화학적 특성 분석을 통한 동전위(Potentiodynamic polarization)와 EIS(Eletrochemical Impedance Spectroscopy) 그리고 Salt spray등을 분석하였다.

• 대한공업교육학회지
• /
• v.45 no.1
• /
• pp.42-62
• /
• 2020

The Ministry of Education has been quick to apply National Competency Standars (NCS) to industrial sites and educational·training institutions in order to resolve discrepancies between practical affairs in industrial sites and vocational education, training & requirements. Full implementation of NCS-based curriculum in vocational education of vocational high schools has been mandatory since 2018. This research used a region-stratified sample of 350 from teachers in 'machinery' and 'machine·metal' majors in mechanical departments of vocational high schools to investigate the awareness of practical courses for metal machining among the teachers. The research results are as follows. First, a majority of the respondents indicated the availability of turning process, milling process, computer integrated manufacturing and measuring courses in mechanical departments. Second, capabilities required by the industry are considered most in selecting practical courses and competence units. Third, positive changes with the introduction of practical courses in the school education are students' practical skills improvement and satisfaction of industrial requirements. Fourth, negative changes with the introduction of practical courses in the school education are too difficult learning modules used in practical courses for students and students' difficulty in learning because of the difference between equipment in schools and industrial equipment in learning modules. Fifth, teachers' satisfaction with practical courses classes and overall conditions is above the average, and their satisfaction with the level of practical courses and bookbinding or purchase of rearranged textbooks of practical courses is below the average. Therefore, application conditions of above-mentioned representative 4 practical courses should be examined and taken care of for consistent improvement to stabilize NCS-based educational courses in mechanical departments.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.6-19
• /
• 2024

With the advancement of Computer-Aided Design/Computer-Aided Manufacturing (CAD-CAM) technology, fabrication of dentures using this technology has gained popularity. As one of CAD-CAM technologies, digital complete denture system has been introduced, which fabricates complete dentures using subtractive manufacturing of monolithic block containing both the color of a denture base and an artificial tooth. In this case, two pairs of upper and lower dentures were fabricated for two patients. Two pairs of complete dentures were fabricated for a 74-year-old male and a 73-year-old female respectively by conventional denture fabrication method and digital method of milling. To obtain a digital complete denture, monolithic block (Ivotion, Ivoclar Vivadent, Schaan, Liechtenstein) was chosen for the materials to fabricate the digital complete dentures. An individual tray was designed using CAD software and manufactured by 3D printing technique. The final impression and interocclusal relationship were recorded using the fabricated individual tray. The final impression was scanned, and the complete denture design and try-in denture were 3D printed using CAD-CAM software. Subsequently, the monolithic block was milled, and the final dentures were fabricated and tried on patients. Previously mentioned two patient cases compared and analyzed stability, fit, speaking, mastication, aesthetics, and patient satisfaction of two pairs of dentures: one fabricated using CAD-CAM system and the other using traditional methods. This was performed to evaluate and report the findings from both denture-making approaches.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.1
• /
• pp.57-65
• /
• 2008

Purpose: Misfit of implant components was very important in terms of prosthodontics. they has been linked to prosthetic complications such as screw loosening and fracture. Although there are many results about rotational freedom or machining tolerance between fixture and abutments, the data about domestic implant systems are lacking. The aim of this in vitro study was to evaluate the rotational freedom of domestic external and internal connection implant systems between their fixtures/anlaogs and abutments comparing imported systems. Materials and Methods: Rotational freedom between abutments and fixtures/analogs was investigated by using digitalized rotational angle measuring device. (1) 1 domestic external connection system(Neobiotec) and 2 imported external connection systems(Nobel Biocare, Anthorgyr), (2) 1 domestic internal connection system(Dentium) and 4 imported external connection systems(Nobel Biocare, Anthorgyr, Straumann, Frident Dentsply), and (3) 1 domestic zirconia external connection abutment(ZirAce) were evaluated. Each group has 3 samples. Mean values for each group were analyzed. Results: The differences relative to rotational freedom between domestic and imported implant systems were observed but domestic external connection implant system showed about 2.67 degrees(in case of fixture) and internal connection system showed about 4.3 degrees(in case of fixture). Domestic zirconia abutment showed less than 3 degrees of rotational freedom in a situation where the abutment was connected to an implant fixture egardless of domestic or imported systems. Conclusion: Newly developed digitalized rotational angle measuring device has high measuring resolution. The rotational freedom of domestic implant systems were similar to imported implant systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.276-283
• /
• 2013

Purpose: The purpose of this study was to investigate the fit and screw joint stability between Ready-made abutment and CAD-CAM custom-made abutment. Materials and methods: Osstem implant system was used. Ready-made abutment (Transfer abutment, Osstem Implant Co. Ltd, Busan, Korea), CAD-CAM custom-made abutment (CustomFit abutment, Osstem Implant Co. Ltd, Busan, Korea) and domestically manufactured CAD-CAM custom-made abutment (Myplant, Raphabio Co., Seoul, Korea) were fabricated five each and screws were provided by each company. Fixture and abutments were tightening with 30Ncm according to the manufacturer's instruction and then preloding reverse torque values were measured 3 times repeatedly. Kruskal-Wallis test was used for statistical analysis of the preloading reverse torque values (${\alpha}=.05$). After specimens were embedded into epoxy resin, wet cutting and polishing was performed and FE-SEM imaging was performed, on the contact interface. Results: The pre-loading reverse torque values were $26.0{\pm}0.30Ncm$ (ready-made abutment; Transfer abutment) and $26.3{\pm}0.32Ncm$ (CAD-CAM custom-made abutment; CustomFit abutment) and $24.7{\pm}0.67Ncm$ (CAD-CAM custom-made abutment; Myplant). The domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) presented lower pre-loading reverse torque value with statistically significant difference than that of the ready-made abutment (Transfer abutment) and CAD-CAM custom-made abutment (CustomFit abutment) manufactured from the same company (P=.027) and showed marginal gap in the fixture-abutment interface. Conclusion: Within the limitation of the present in-vitro study, in domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) showed lower screw joint stability and fitness between fixture and abutment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.41-41
• /
• 1999

핵융합 장치의 플라즈마 운행동안 토카막 내벽에 도달하는 온도는 최저 $600^{\circ}C$ 이상이다. 또한 플라즈마 자체와 사용자(User)들의 시료로부터 방출되는 입자들에 의한 내벽 충격(damage)은 장기간의 안정적인 운행 및 연구에 심각한 영향을 미친다. 이러한 이유로 토카막 제작시 내벽 보호재의 선정은 매우 높은 비중을 차지한다. Graphite는 높은 융점과 가공의 용이성으로 토카막 내벽의 보호재로 선호되는 물질이다. 그러나 토카막 용기(vessel)에 사용되는 스테인레스 스틸(AISI 316LN)보다 약 50배 이상의 기체 방출율(outgassing rate)을 가진다. 그러므로 장착 이전의 초기 청정화 과정이 매우 중요하며, 특히 400m2의 약 2톤(2000kg)의 graphite가 사용되므로 대량 처리를 할 수 있는 방법의 선정도 함께 개발되어야 한다. 본 연구팀에서는 처음 10개 회사의 시제품을 검토한 후, 최종 2개 회사의 4가지 종류의 시료를 선정하였다. 선정된 시료는 Union Carbide의 ATJ와 Toyo Tanso의 IG-110, IG-43, Ig-430이다. 시료는 비절삭유(oil-free) 가공에 의해 80$\times$2$\times$3 (mm)의 크기로 제작되었고 에탄올과 메탄올 용액에서 초음파 세척되었다. 건조된 시료는 TDS(Thermal Desorption Spectroscopy) 장치에 장착되어 세 단계의 실험을 하였다. 처음은 승온(상온 ~100$0^{\circ}C$)에 의한 방출 기체의 성분 분석, 두 번째는 장기간 (2주) 대기 노출 후 주요 방출 기체의 온도에 따른 변화, 마지막으로는 특정 기체에서의 장기간 보관후, 주요 방출 기체의 온도에 따른 변화를 조사하였다. 다음 그림 1은 본 연구에서 사용된 TDS 장치의 개략도이고 그림 2는 TDS 장치에 장착 직 후와 대기 중 노출된 시료들의 온도증가에 따른 총 압력의 변화이다.