• Composites Research
• /
• v.26 no.6
• /
• pp.380-385
• /
• 2013

Characteristics of delamination factor and surface roughness by drilling condition for glass fiber reinforced plastic (GFRP) composites were investigated in this paper. An expression to quantify the delamination factor was induced by using image pixels of the entry and the experimental drilling was accomplished by fabricating several GFRP specimens in condition of minimizing the effect of vibration and heat. A method for measuring 6 points average surface roughness was applied to acquire the more reliable roughness values. The experimental results showed that the delamination factor was decreased as the feed rate was increased and it was also slightly decreased as the cutting speed was increased. Also, it was investigated that the surface roughness at inner surface of drilled holes was increased as the feed rate was increased, whereas the roughness values were not affected by the cutting speed variation.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.26-33
• /
• 1999

Automatic monitoring of cutting process is one of the most important technologies for increasing the stability and the reliability of unmanned manufacturing system. In this study, basic methods which use the acoustic emission (AE) signals and cutting forces were proposed to monitor flank wear (width of flank wear) quantiatively. First, in order to detect flank wear, it was investigated that the influence of cutting conditions, that is, cutting velocity, feed and depth of cut, on AE signals (${AE_rms}$) and cutting forces. Furthermore, the relation between flank wear and the measured signals (${AE_rms}$, cutting force) was discussed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.129-134
• /
• 2013

Titanium used in industry has been widely applied for aerospace important parts and automobile important parts, etc. because the titanium is higher in strength compared to the steel and light in weight compared to the steel. This study is to investigate the effect of cutting tool cooling method and cutting time on the spindle speed and feed rate of vertical machining center as a parameter to find the rough cutting time in the medium speed cutting machining of the titanium alloy. It is found that the cutting machining heat are increased as the feed rate, cutting time and spindle speed are raised.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.188-191
• /
• 2001

Generally, main factors of tool damage are cutting speed, feed rate and depth of cut. The increase of those factors can cause tool breakage or worsen product quality such as machining accuracy deterioration. Those three factors are concerned with cutting force. Cutting force reaches at its maximum value when cutter blade cuts away the object directly, and it is the time when tool damages are at high probability. In this study, we detect the maximum cutting force affecting tool damage and control the maximum cutting force based on the measured peak force.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.3-6
• /
• 2002

This paper presents the cutting simulation system for prediction and regulation of cutting force in CNC machining. The cutting simulation system includes geometric model, cutting force model, and off-line fred rate scheduling model. ME Z-map(Moving Edge node Z-map) is constructed for cutting configuration calculation. The cutting force models using cutting-condition-independent coefficients are developed for flat-end milling and ball-end milling. The off-line feed rate scheduling model is derived from the developed cutting force model. The scheduled feed rates are automatically added to a given set of NC code, which regulates the maximum resultant cutting force to the reference force preset by an operator. The cutting simulation system can be used as an effective tool for improvement of productivity in CNC machining.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.267-267
• /
• 2004

엔드밀은 산업현장에서 정밀 금형과 다이 제조 시 넓게 사용되는 절삭 공구이며 공작기계의 향상에 따라 많은 발전을 거듭해 왔다 공작기계의 고속화에 따라 공작기계의 측면에서는 강성 증가, 열변형의 억제와 동적 안정성의 개선 및 응답성 개선을 통하여 정밀도를 향상시키고 이송속도와 절삭속도의 증가를 통해 생산성을 증대시키고 있으며 공구의 측면에서는 새로운 재종 및 코팅기법의 개발을 통해 공구수명의 향상을 달성하고 있다. 또한 공구형상의 최적화를 통해 동적 안정성을 확보하고 가공 정밀도를 개선하고자 하는 다양한 시도가 이루어지고 있다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.648-652
• /
• 1996

Grinding Center(GC)는 머시닝센터가 갖는 드릴링, 태핑 등의 절삭가공의 수행은 물론 주축의 고속화, 이송계의 고정밀화를 토대로 연삭숫돌의 절삭성 회복과 다듬질면의 거칠기를 확보하기 위한 기계로서 Dressing/Truing장치, 기상계측 장치, CNC기능을 구비하여 테이블과 공구간에 3차원의 상대운동을 시킴으로써 평면연삭, 내면연삭, 홈연삭, 캠연삭 등의 복잡한 형상의 연삭가공에 대해서도 공정을 집약화 할 수 있는 기계이다.(중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.104-118
• /
• 1998

In this paper, the motion of ballscrew and shape of workpiece are the main objective variables varying with load conditions. To verify feed mechanism in NC lathe, the monitoring system is designed and cutting condition variables are spindle speed depth of cut and feed. During machining, rotation number of ballscrew motion of ballscrew in direction to gravity center and cutting force are measured. After machining, the roughness of workpiece is measured.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.3
• /
• pp.257-261
• /
• 2001

이 연구는 밀링가공시 체터진동을 억제하기 위하여 부등각 앤드밀(나선각이 서로 다른 앤드밀)을 사용하여 절삭가공을 수행 한 후, 그 가공특성을 고찰한 것으로 가공표면의 기하학적 오차를 일반적으로 사용하는 등각 엔드밀에 의한 값과 실험에 의해 비교 검토한 결과, 두 엔드밀 모두 가공표면의 기하학적 오차는 유사함 나타내고 있으나, 부등각 엔드밀의 절대오차는 등각 엔드밀 보다 더 적은 경향을 나타내고 있다. 이들의 오차는 상향절삭보다 하야절삭 가공했을 때가 더 큰 것으로 나타났다. 더구나, 등각 엔드밀과 부등각 엔드밀과의 절대오차가 다르게 나타난 것은 밀링가공시 사용한 절삭날 인선에 의하여 완전히 의존되어지며, 또한 다른 나선각에 의해 기인된 각각의 절삭날에 대한 절삭날당 이송비의 변화에 의한 원인이라는 것을 명백히 알 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.133-145
• /
• 1996

This paper presents an indirect cutting force measuring system, which uses the current signals from the AC servo drive units of the horizontal machining center, with its applications to the adaptive regulation of the cutting forces in various milling processes and to the on-line monitoring of tool breakage. A typical model for the feed-drive control system of a horizontal machining center is developed to analyze cutting force measurement from the drive motor. The pulsating milling forces can be measured indirectly within the bandwidth of the current feedback control loop of the feed-drive system. It is shown that the indirectly measured cutting force signals can be used in the adaptive controller for cutting force regulation. The whole scheme has been embedded in the commercial machining center and a series of cutting experiments on the face cutting processes are performed. The adaptive controller reveals reliable cutting force regulating capability against the various cutting conditions. It is also shown that the tool breakage in milling can be detected within one spindle revolution by adaptively filtering the current signals. The effect of the cutter run-out has been considered for the reliable on-line detection of tool breakage.