Browse > Article

A Study on Characteristics of Cutting Tool Wear by Cooling Method in Rough Machining of Titanium Alloy  

Kim, Gee-Hah (Dongbusan Campus of Korea Polytechnic Dept. of Computer Applied Machinery)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.12, no.5, 2013 , pp. 129-134 More about this Journal
Abstract
Titanium used in industry has been widely applied for aerospace important parts and automobile important parts, etc. because the titanium is higher in strength compared to the steel and light in weight compared to the steel. This study is to investigate the effect of cutting tool cooling method and cutting time on the spindle speed and feed rate of vertical machining center as a parameter to find the rough cutting time in the medium speed cutting machining of the titanium alloy. It is found that the cutting machining heat are increased as the feed rate, cutting time and spindle speed are raised.
Keywords
Cutting Tool Cooling Method; Vertical Machining Center; Titanium Alloy; Spindle Speed; Feed Rate; Flat End-mill; Cutting Machining Heat; Cutting Tool Wear Rate;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Ho-Chang Lee, Hae-Ji Kim, Nam-Kyung Kim, "Tapping Machining Characteristics of Titanium Hard-to-Cut Material," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10 No. 1, pp. 80-86, 2011.
2 Sung Hun Kim, Hwan Choi , Jong Chan Lee, "A Study on the Grinding Characteristics of Titanium Alloy," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 1 No. 1, pp. 55-62, 2002.
3 S. J. Lee, H. M. Park, S. T. Lee and M. K. Ha, "Temperature Measurement Characteristics of High-speed Machining," Korean Society of Manufacturing Process Engineers Annual Conference and Exhibition, pp. 263-268, 2006.
4 N. Y. Kim, J. B. Ko, and D. J. Lee, "A Study on the Machining Characteristics of Ti-6Al-4V Alloy," Journal of the Korean Society of Precision Engineering, Vol. 20, No. 4, pp. 20-28, 2003.
5 N. Y. Kim, J. B. Ko, and D. J. Lee, "A Study on the Tool Wear and Cutting Characteristics in the Machining of Ti-6A1-4V Using Tungsten Carbide Tool," Journal of the Korean Society of Machine Tool Engineers, Vol. 11, No. 2, pp. 9-16, 2002.
6 Gee-hah Kim, "A Study on Characteristics of Cutting by Cutting Conditions in Titanium Machining," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12 No. 1, pp. 84-89, 2013.   DOI