• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.31-40
• /
• 2008

The dynamic moduli of asphalt concrete are very important for the analysis and the design of asphalt pavement systems. The dynamic modulus master curve is usually represented by a sigmoidal function. The Ramberg-Osgood model was widely used for fitting of normalized modulus reduction curves with strain of soils in soil dynamic fields. The master curves were obtained by both sigmoidal functions and modified Ramberg-Osgood model for the same dynamic modulus data set, the fitting abilities of both methods were excellent. The coefficients in sigmoidal function are coupled. Therefore, it is not possible to separate the characteristics of the master curve with absolute value and shape. However, the each fitting coefficient in the Ramberg-Osgood model has a unique effect on the master curve, and the coefficients are not coupled with each other.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.453-453
• /
• 2012

최근 디스플레이 시장에서는 저전력 자발광 소자인 OLED가 많은 관심 속에 연구 진행 되고 있다. 높은 효율과 투명, 플렉서블 디스플레이가 실현 가능한 OLED 소자는 초기 수명감소, 저전압구동 및 신뢰성에 대한 문제점을 개발 중에 있기에 많은 가능성을 현실화 하지 못하고 있다. 따라서 본 연구에서는 OLED소자의 역방향 반송자 회복 수명을 측정함으로써 스트레스에 의한 소자 열화를 전기적으로 분석하는 방법을 제시하고자 한다. 우선 5cm5cm의 면적에 네 개의 픽셀이 들어가는 후면 발광 Blue OLED를 제작하고 $-40^{\circ}C$부터 $100^{\circ}C$까지 $10^{\circ}C$간격으로 온도 스트레스를 주어 수명을 측정하였다. 전원공급기를 사용하여 직류 전압을 2V 인가하고 함수 발생기를 사용하여 +3V, -0.5V의 구형파를 500 kHz 주파수로 인가하였다. 이러한 조건으로 측정된 소자는 오실로스코프를 이용하여 전압 회복시간을 측정하고 온도 스트레스에 따른 수명을 산출하였다. $-40^{\circ}C$일 때 는 약 1.92E-7s이고 $100^{\circ}C$일 때 는 약 1.49E-7s로 약 0.43E-7s정도 감소하였다. 양의 전압이 인가되었을 때의 소자 내부의 전압은 온도가 증가함에 따라 꾸준히 감소하였고, 이에 따라 또한 꾸준히 감소하였다. 그러나 음의 전압이 인가되는 부분에서는 무설 전류에 의하여 음의 방향으로 흐르게 되는 전압의 절대값이 꾸준히 증가하였고 대체적으로 온도가 증가함에 따라 그래프가 아래로 이동하는 현상이 관찰되었다. 이러한 경향은 이상적인 다이오드의 반송자 축적 식을 통하여 온도가 증가함에 따라 가 증가하는 것과 관련이 있음을 확인하였다. 따라서 다수 층의 레이어로 이루어진 OLED소자의 열적 스트레스에 대한 수명 변화의 물리적 조건이 이상적인 다이오드 특성에 부합한다는 것을 확인하였다.

• Analytical Science and Technology
• /
• v.23 no.4
• /
• pp.347-356
• /
• 2010

Emission characteristics of major offensive odorants were investigated using odor samples collected from two urban stormwater catch basins with highly contrasting environmental conditions. A total of 6 major offensive odorants ($H_2S$, $CH_3SH$, DMS, DMDS, $CH_3CHO$ (AA), and $NH_3$) were measured. For this comparative analysis, odor intensity (OI) of all odorants was derived from their concentration data via empirical equations introduced by Nagata. Both the absolute magnitude of odorant concentrations and their OI values were used concurrently to evaluate the occurrence pattern of each individual odorant. According to our analysis, RSCs including $CH_3SH$, $H_2S$, and DMS tend to exhibit the highest odor strengths among all 6 compounds investigated. The overall results of our study suggest that the emissions of major offensive odorants from urban stormwater catch brains can be explained at least partially by the temporal trend of human activity.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.167-175
• /
• 2016

This study analyzed empirically the same data through SPSS statistic(regression analysis) and AMOS program(structural equation model) used for cause and effect analysis. The result of empirical analysis was as follows. The different outcome of coefficients and p-values were deducted. Especially, in the mediated effect testing, meanwhile, SPSS statistic(regression analysis) pictured mediated effect, AMOS program(structural equation model) did not picture mediated effect on the reject zone of null hypothesis(absolute t-value and C.R.-value were nearby 1.96). Eventually, this study showed that what program used determined the outcomes of coefficients and p-values(In particular, the outcomes were differentiated further in the increasing measurement error) though using the same data.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.270-275
• /
• 2001

We have studied effects of annular phase apodizer and bump shapes on the read-out signal in an optical disc system, using scalar diffraction theory. In order to detennine the optimum parameters of annular phase apodizer which will minimize the influence of spherical aberration, we defined WR as the ratio between the maximum wavefront aberration and some absolute value of wavefront aberration at any position r in the pupil. A cylindric bump, a semi-conic bump and a conic bump were$.$ also considered as different types of bump shape. As the radius and shape of bump varies, the read-out signal from an optical disc system with an annular phase apodizer was similar to that from an optical disc system without apodizer. When spherical aberration increases, the maximum read-out signal of an optical disc system with an annular phase apodizer and minimum bump radii giving read-out signal higher than 0.6 rarely varied. Especially, the optimum parameters at $W_R$ = 0.4 , 0.6 gave the most compensated effect of a spherical aberration.ration.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.122-128
• /
• 2010

We measured shear viscosity of copoly(styrene(St)/butyl methacrylate(BMA)) (co-PSB) particles, with a capillary rheometer at $170^{\circ}C$, prepared by suspension polymerization with hydrophobic silica as a stabilizer. co-PSB particles with the weight average molecular weights of lower than 74,800 g/mol displayed a Newtonian behavior at low shear rates. With the weight average molecular weight exceeding 136,800 g/mol, co-PSB particles showed shear thinning against shear rates and the absolute value of the slopes between shear viscosity vs. shear rate increased. When the ratio between St and BMA changed from 7/3 to 5/5 to 3/7, shear viscosity and glass transition decreased despite similar molecular weights. When the ratio was 1/9, it showed a large increase in initial shear viscosity despite reduced glass transition. Shear viscosity exhibited an increase in proportion to carbon black concentration. The effect of carbon black concentration on the shear viscosity of co-PSB composites was less pronounced compared to varying molecular weights and/or compositional ratio.

• The Korean Journal of Pain
• /
• v.22 no.2
• /
• pp.146-150
• /
• 2009

Background: A skin temperature difference is one of the variables used in the diagnosis of complex regional pain syndrome. However, there have been no reports as to whether the real (${\Delta}T$) or absolute value ($|{\Delta}T|$) of skin temperature differences should be used in the diagnosis of complex regional pain syndrome. This study was conducted to compare the diagnostic validity of ${\Delta}T$ with $|{\Delta}T|$ for complex regional pain syndrome using receiver operating characteristic curves (ROC). Methods: Infrared thermographic images were obtained from the 144 patients who were suspected to have CRPS in a unilateral limb. After ${\Delta}T$ and $|{\Delta}T|$ calculation from the thermographic image, ROCs of ${\Delta}T$ and $|{\Delta}T|$ were developed, and the areas under the curve (AUC) for the ROC curves were compared. Results: AUCs of ${\Delta}T$ and $|{\Delta}T|$ were 0.520 and 0.746 respectively, this difference was statistically significant (P < 0.001). Conclusions: Absolute skin temperature difference shows greater validity in the diagnosis of CRPS than ${\Delta}T$. Therefore, $|{\Delta}T|$ is more useful when comparing the skin temperature of CRPS patients.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.6
• /
• pp.47-53
• /
• 2007

True motion estimation is necessary for deinterlacing, frame-rate conversion, and film judder compensation. There have been several block-based approaches to find true motion vectors by tracing minimum sum-of-absolute-difference (SAD) values by considering spatial and temporal consistency. However, the algorithms cannot find robust motion vectors when the texture of objects is changed. To find the robust motion vectors in the region, a recursive vector selection scheme and an adaptive weighting parameter are proposed. Previous frame vectors are recursively averaged to be utilized for motion error region. The weighting parameter controls fidelity to input vectors and the recursively averaged ones, where the input vectors come from the conventional estimators. If the input vectors are not reliable, then the mean vectors of the previous frame are used for temporal consistency. Experimental results show more robust motion vectors than those of the conventional methods in time-varying texture objects.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.3
• /
• pp.65-72
• /
• 2011

Extensive computer simulations to account for the randomness in the process of seismic demand estimation have been a serious obstacle to the adoption of probabilistic performance assessments for the decision of applying seismic intervention schemes. In this study, a method for rapid fragility assessments based on a response database and the fragility contour method are presented. By the comparison of response contours in different formats, it is shown that representing maximum responses in ductility demand is better for the investigation of the effect of structural parameter changes on seismic demands than representations in absolute values. The presented fragility contour enables designers to practically investigate the probabilistic performance level of every possible retrofit option in a convenient manner using visualized data sets. This example demonstrates the extreme efficiency of the proposed approach in performing fragility assessments and successful application to the seismic retrofit strategies based on limit state probabilities.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.214-219
• /
• 2011

We perform the frequency-domain waveform inversion based on the residual-selection strategy. In the residual-selection strategy, we classify time-domain residual wavefields into several groups according to the order of absolute amplitudes. Because the residual wavefields are normalized after regularization of the gradient directions within each group, the residual-selection strategy plays a role in enhancing the small-amplitude wavefields, which contributes to improving the deep parts of inverted subsurface images. After classifying residuals in the time domain, they are transformed to the frequency domain. Waveform inversion is performed in the frequency domain using the back-propagation technique which has been popularly used in reverse-time migration. The residual-selection strategy is applied to the SEG/EAGE salt and IFP Marmousi models. Numerical results show that the residual-selection strategy yields better results than the conventional frequency-domain waveform inversion.