• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.110-110
• /
• 2016

도시 유역의 강우-유출 모의에는 지표 투수율 및 하수관거 영향 등 인위적 배수계통의 영향을 고려할 수 있는 도시유출모형이 널리 이용되고 있으며, 모형 검증을 통해 모의 성능을 평가한다. 도시유출모형의 검증은 일반적인 강우-유출 모형과 같이 강우사상별 유량의 관측시계열과 모의시계열의 목적함수가 최소가 되는 최적 매개변수를 탐색하는 과정이다. 도시유출모형의 검증에서 발생하는 문제점은 크게 다음과 같다. 첫째, 대규모 도시 유역의 복잡하고 다양한 하수관거에 대한 최적매개변수를 관거별로 구하는 것은 물리적으로 불가능하다. 따라서 동일 배수분구내 하수관거의 매개변수 값은 동일하다고 가정하거나, 모형 단순화 과정을 통해 매개변수의 물리적 범위 내에서 최적해를 탐색해야 하는 단순화에서 기인한 불확실성이 있다. 둘째, 다양한 매개변수들의 물리적 범위를 고려하기 위해서는 전역최적화기법이 유효하다. 그러나 전역최적화 종류, 목적함수, 모의횟수, 목표성능별 최적 매개변수 결과가 각각 다르므로 추정된 최적 매개변수의 범위에 대한 불확실성이 있다. 이에 본 연구에서는 Bayesian 모형과 EPA SWMM(Storm Water Management Model)을 연계하여 도시유출모형의 매개변수 불확실성을 정량적으로 분석할 수 있는 모형을 제안하고자 한다. 이를 위해 서울 우이천 유역을 대상으로 SWMM 모형을 구축하고, 절단 정규분포(truncated Gaussian distribution)를 사전분포(prior)로 가정하여 매개변수의 물리적 범위를 고려하였다. 최종적으로 결합확률분포로 계산된 각 매개변수간 사후분포를 통해 모의된 유출량의 불확실성을 정량적으로 분석하였다. 본 연구에서 제안된 모형은 대규모 도시 유역의 도시유출모형 구축 시 다양한 매개변수의 물리적 범위를 고려한 최적화와 동시에 내재된 불확실성을 정량적으로 분석할 수 있으므로, 침수예측 및 홍수예경보 등의 문제에서 상당한 신뢰성을 확보할 수 있을 것으로 판단된다.

• Journal of Convergence for Information Technology
• /
• v.10 no.12
• /
• pp.146-155
• /
• 2020

This study was to evaluate the usefulness of gamma glutamyl transferase (GGT) as a surrogate marker predicting metabolic syndrome. 7,155 non obese men over the age of 20 were studied as subjects. The criteria for diagnosing MetS were the National Cholesterol Education Program - Third Adult Treatment Panel (NCEP-ATP III). The risk of developing MetS according to GGT was conducted logistic regression analysis, and the ROC (receiver operating characteristic) curve was obtained to confirm GGT ability to predict the risk of MetS. Regardless of age and body mass index, MetS had a 7.09 times higher risk of onset in the fourth quartile than in the first quartile of GGT (p<0.001). The AUC (area under the curve) of GGT for the diagnosis of MetS was 0.715, and the cutoff value of GGT was 40.0 U/L, the sensitivity was 65.0%, and the specificity was 70.2%. Therefore, GGT is considered to be a useful diagnostic index for diagnosing MetS.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.543-548
• /
• 2005

Double-layered spheres play an important role in controlling drug delivery for pharmaceutical application, because of the low initial burst compared with single-layered spheres and targetable delivery to specific organ. But it has drawback in loading drug and controlling size. In this study, we developed double-layered spheres using relatively simple oil-in-water (O/W) solvent evaporation method witw/without ultrasonication and investigated the size variation of the double-layered microspheres on the contents of poly(lactide- co-glycolide) (PLGA). Double - layered spheres were char-acterized by scanning elecron microscope (SEM), camscope, and confocal fluorescence laser microscope (CFLM). Double-layered spheres showed smooth surfaces and obvious difference between core and corona by SEM observation and camscope. We observed the fluorescent core in the double-walled spheres composed of FlTC-dextran and PLGA using CFLM. It was found that the core of the microsphere was dextran and the corona of the fabricate microsphere was PLGA. Also, the more PLGA concentration, the more the size of the fabricating double-layered sphere observed.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.5
• /
• pp.421-433
• /
• 2010

The most typical deterioration of steel structures is corrosion damage. However, a method to evaluate residual load-carrying capacity of corroded steel structures is not yet established. It is difficult to check current serviceability and safety of the structures. In this study, compressive tests and finite element analyses were conducted on H-beams with corroded web. Then, the effect of corrosion damage on web crippling strength and evaluation methods of the web crippling strength are studied. Based on the tests, 4 H-beam specimens used in a subway construction site and 9 H-beam specimens with different web-thickness and damaged-height underwent compression-tests. To consider loading and supporting areas in the site, compressive loading was applied in the entire region of the upper and bottom flange in 5 H-beam specimens and applied partially on the regions of the upper and bottom flange in 8 specimens. The finite element analysis of 38 parametric model specimens simulating different corrosion damages was also carried out. From experimental and analytical results, the relationships between corrosion damages in the web and residual web crippling strength are presented. Factors web crippling strength was reduced are formulated by using residual average thickness and the standard deviation of the corroded web thickness. Also, a simple evaluation method of residual web crippling strength was proposed.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.2
• /
• pp.99-104
• /
• 1982

These studies were carried out to investigate the damage of root rot of hop by heptachlor residues in soil at nine farm fields and pot experiment for two years from 1980 to 1981. 1) Pot experiment results indicated that root rot of hop occurred in farm field were caused by heptachlor phytotoxicity. 2) The damage of root rot of the hop was found by heptachlor residues in soil. Hop root in the low concentration of heptachlor was turned to brown mottle, and then rotted. In high concentration, the hop root was decreased in number, blocked in growth, and resulted to greyish change with death. 3) Hop vine damaged by heptachlor was hardened and broken with ease. 4) Heptachlor epoxide which was inferred to be the main cause of hop root rot gave the damage to hop at 0.009 ppm reisdues in soil. 5) The phytotoxicity of heptachlor was proved to last for 10 years or more in this study.

• Journal of Plant Biotechnology
• /
• v.35 no.2
• /
• pp.115-120
• /
• 2008

L-Ascorbic acid (vitamin C) in vegetables is an essential component of human nutrition. The objective is to transform lettuce (Lactuca sativa L.) with GalUR gene that is involved in the vitamin C biosynthesis. The cotyledons of Hwoahong (Nongwoo Bio Co.) were used to induce the callus and shoot under the selection media with MS + 30 g/L Sucrose + 0.5 mg/L BAP + 0.1 mg/L NAA + 100 mg/L kanamycin + 200 mg/L lilacillin, pH 5.2. The shoot was developed from the cut side of the explants after 3 weeks on the selection media. We successfully transformed the lettuce with GaIUR gene and analyzed the levels of vitamin C. We found that some of the lettuce transgenic lines contained higher levels of vitamin C compared with the normal one (non-transformed). Especially, some of $T_1$ lettuces inserted by GalUR showed about $3{\sim}4$ times higher content of vitamin C compared to the non-transformed lettuce. This data support the previously work performed with GLOase transgenic $T_1$ lettuces from which several times higher content of vitamin C were identified. The $T_2$ lettuces with high content of vitamin C have been selected for further analysis.

• The Korean Journal of Pesticide Science
• /
• v.20 no.2
• /
• pp.83-92
• /
• 2016

New tree wound-treatment formulations (WTF) were developed in this study. Stimulating effects of plant growth regulating substance on callus formation were evaluated in vivo twig disc culture of Zelkova serrata, Ziziphus jujuba, Pinus densiflora, Ginkgo biloba. and Aesculus turbinata. Based on the evaluation, WTF were prepared with 2,4-D, NAA, and IBA using xanthan gum as an extending agent. WTF were pasted on $2{\times}10cm$ artificial wound on the stem and the effects were evaluated 12 weeks later with the thickness of new callus-tissues. The effects varied with tree species and the growth regulators. In Z. serrata and A. turbinata, 2 mg/L of 2,4-D was the best WTF. In P. koraiensis and G. biloba, 8 mg/L of NAA and 1 mg/L of IBA were the best, respectively. Callus formation was quite lower in G. biloba compared to other species. Stimulating effect of thiophanate-methyl paste was excellent only in Z. serrata and lower than certain WTF in other species. Vaseline, which was used generally as an WTF, remained longer on the wound and causing decay. From the results, it could be recommended that 2,4-D, NAA and IBA were the best WTF for Z. serrata/A. turbinata, P. koraiensis and G. biloba, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.227-234
• /
• 2006

Microstructures of free surface and interior of glass-ceramics obtained by heat treating silicate glass specimen containing electric arc furnace dust(EAF dust) were observed. The crystallization temperature, $T_c$ of glassy specimen was measured around $850^{\circ}C$ from the result of different thermal analysis so heat treatment temperature to obtain glass-ceramic specimen was selected as $950^{\circ}C$ for 1 hr. Glass specimens containing 50 wt% dust were amorphous, while glass specimens containing 70 wt% dust showed spinel crystal peaks in XRD results. In case of glass-ceramic specimens, spinel crystalline phase was appeared with willemite, and willemite crystal peak intensity increased with increasing dust contents. The fractured surface of glass specimens containing 50 wt% dust was smooth like mirror surface, but that containing 70 wt% dust showed spinel crystals of 10 ${\mu}m$ size in glass matrix. In case of glass-ceramic specimens, ZnO crystal particles of $2{\sim}5{\mu}m$ size were produced in free surface and glassy phase, spinel and willemite crystal phases existed in interior. There were no crystals in glasses containing 50 wt% dust, while glass containing 70 wt% dust had 14 vol% crystals. Crystallinity of glass-ceramic specimens containing 50 and 70 wt% dust were 19 and 43%, respectively. When microstructures of glass and glass-ceramic specimens were observed through SEM after TCLP experiment, glass specimens showed flaking phenomenon while glass-ceramic specimens showed a slight corrosion evidence without any cracks.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.543-549
• /
• 2000

Gutta-percha와 근관sealer를 사용한 근관 충전은 가장 많이 이용되고 성공률이 높은 방법이지만, 현재 사용되는 모든 근관sealer는 미세누출을 나타낸다. 따라서 더 효과적인 근관 폐쇄를 이루기 위한 재료 및 방법들이 연구되어왔다. 이중 상아질 접착제는 근관 충전재와 함께 사용되어 미세누출을 감소시키지만, 근관 내에 사용하기에 술식이 복잡하고 기술이 요구된다. 본 연구의 목적은 gutta-percha와 레진계 근관 sealer로 충전한 근관에서 self-etching primer를 미리 도포한 경우와 도포하지 않은 경우의 치근단 미세누출을 비교하고, self-etching primer를 도포함에 있어 근관 내에 적용하는 방법에 따른 미세누출을 비교하는 것이다. 또한 근관sealer와 상아질 계면을 주사전자현미경으로 관찰하여, 이 결과를 미세누출과 관련시켜보고자 하였다. 36개의 발거된 사람의 단근치에서 치관부를 절단, 제거하고 ProFile로 근관 형성한 후, 무작위로 선택하여 4개의 군으로 분류하였다. 1군에서는 주사기와 30게이지 주사 바늘로 self-etching primer를 근관 내에 적용하였고, 2군에서는 self-etching primer를 paper point에 적셔 근관 내에 적용하였다. 3군에서는 self-etching primer를 적용하지 않았다. 1, 2, 3군의 치아를 gutta-percha와 AH26 sealer를 사용하여 continuous wave 충전법으로 충전한 후 치근단공 주위 3mm를 제외한 치근변에 nail polish를 2회 도포하였고, 4군(음성 대조군)은 치근면 전체에 도포하였다. 1군과 2군에서 각각 2개의 치아는 주사전자현미경적 관찰을 위해 준비하였다. 모든 치아를 Methylene Blue 수용액에 48시간동안 침적, 수세한 후 치아 장축에 평행하게 양분하여 10배의 실물확대현미경 하에서 치근단 색소 침투를 관찰하였다. Self-etching primer를 도포한 군과 도포하지 않은 군 사이에는 평균 미세누출량에 유의한 차이가 없었다. 주사 바늘로 적용한 군과 paper point로 적용한 군 사이에도 평균 미세누출량에 유의한 차이가 없었다. 상아질과 근관 sealer계면의 주사전자현미경 관찰 결과 일부분에서 긴밀한 접착 관계를 나타내었고, 다른 부분에서는 간극을 나타내었다.

• Journal of Korean Society of Forest Science
• /
• v.69 no.1
• /
• pp.28-35
• /
• 1985

To estimate the aboveground biomass of Pinus rigida and Pinus rigida ${\times}$ taeda 22-year-old plantations, the experimental plots of $200m^2$ in size located in Kwangju of Jeonlanam-do were selected. Nine sample trees selected at each plot taking account of DBH distribution were felled and the diagram of oven-dry weight distribution of stem, branch, and needle for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component (stems, branches, and needles) and the variable of $(DBH)^2{\cdot}H$ were obtained. The aboveground standing crops was estimated to be as much as 71.61 and 142.32 tons of dry matter per hectare in P. rigida and P. rigida ${\times}$ taeda stand respectively. The net production was estimated as 10.81 and 10.46 t/ha/yr and the net assimilation rate 1.32 and 1.00 kg/kg/yr in P. rigida and P. rigida ${\times}$ taeda stand respectively. And the efficiency of needles to produce stem was 0.97 and 0.81 kg/kg/yr in same order.